oralce11g客戶端安裝(靜默方式)
參考:
Oracle Database Client Quick Installation Guide 11g Release 2 (11.2) for Linux x86
首先確認作業系統防火牆和selinux已關閉:
--檢視selinux狀態:sestatus
關閉SELinux的方法:
修改/etc/selinux/config檔案中的SELINUX="" 為 disabled ,然後重啟。
如果不想重啟系統,使用命令setenforce 0
--檢視iptables狀態:service iptables status
關閉防火牆
1)重啟後永久性生效:
開啟: chkconfig iptables on
關閉: chkconfig iptables off
2) 即時生效,重啟後失效:
開啟: service iptables start
關閉: service iptables stop
1. Memory Requirements:At least 256 MB of physical RAM.
# grep MemTotal /proc/meminfo
To determine whether the system architecture can run the software, enter the following command:
# grep "model name" /proc/cpuinfo
To determine the size of the configured swap space, enter the following command:
# grep SwapTotal /proc/meminfo
To determine the available RAM and swap space, enter the following command:
# free
2. Disk Space Requirements
The minimum disk space requirement for a client install in the /tmp directory is 400 MB.
To determine the amount of disk space available in the /tmp directory, enter the following command:
# df -k /tmp
Between 146 MB and 1.38 GB of disk space for the Oracle software, depending on the installation type:
Installation Type Requirement for Software Files
Instant Client 146 MB
Administrator 1.38 GB
Runtime 1.10 GB
3. Operating System Requirements
To determine the distribution and version of Linux installed, enter the following command:
# cat /proc/version
4. Kernel Requirements
For Asianux Server 3, Oracle Linux 5, and Red Hat Enterprise Linux 5:
2.6.18 or later
To determine whether the required kernel is installed, enter the following command:
# uname -r
5.Package Requirements
The following or later version of packages for Asianux Server 3, Oracle Linux 5, and Red Hat Enterprise Linux 5 should be installed:
binutils-2.17.50.0.6
compat-libstdc++-33-3.2.3
elfutils-libelf-0.125
elfutils-libelf-devel-0.125
elfutils-libelf-devel-static-0.125
gcc-4.1.2
gcc-c++-4.1.2
glibc-2.5-24
glibc-common-2.5
glibc-devel-2.5
ksh-20060214
libaio-0.3.106
libaio-devel-0.3.106
libgcc-4.1.2
libgomp-4.1.2
libstdc++-4.1.2
libstdc++-devel-4.1.2
make-3.81
sysstat-7.0.2
作業系統檢查:
rpm -q binutils compat-libstdc++-33 elfutils-libelf elfutils-libelf-devel gcc gcc-c++ glibc glibc-common glibc-devel libaio libaio-devel libgcc libstdc++ libstdc++-devel make sysstat
[root@client ~]# rpm -q binutils compat-libstdc++-33 elfutils-libelf elfutils-libelf-devel gcc gcc-c++ glibc glibc-common glibc-devel libaio libaio-devel libgcc libstdc++ libstdc++-devel make sysstat
binutils-2.20.51.0.2-5.43.el6.x86_64
package compat-libstdc++-33 is not installed
elfutils-libelf-0.161-3.el6.x86_64
package elfutils-libelf-devel is not installed
package gcc is not installed
package gcc-c++ is not installed
glibc-2.12-1.166.el6.x86_64
glibc-common-2.12-1.166.el6.x86_64
glibc-devel-2.12-1.166.el6.x86_64
libaio-0.3.107-10.el6.x86_64
package libaio-devel is not installed
libgcc-4.4.7-16.el6.x86_64
libstdc++-4.4.7-16.el6.x86_64
package libstdc++-devel is not installed
make-3.81-20.el6.x86_64
sysstat-9.0.4-27.el6.x86_64
[root@client ~]#
yum install -y compat-libstdc++*
yum install -y elfutils-libelf-devel*
yum install -y gcc*
yum install -y libaio-devel*
yum install -y libstdc++-devel*
掛載光碟,配置yum源:
[root@client ~]# mount /dev/cdrom /mnt
mount: block device /dev/sr0 is write-protected, mounting read-only
[root@client ~]#
[root@client ~]# vi /etc/yum.repos.d/yum.repo
[base]
name=base
baseurl=file:///mnt/Server
enabled=1
gpgcheck=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
[root@client yum.repos.d]#
[root@client yum.repos.d]#
[root@client yum.repos.d]# yum clean all
Loaded plugins: product-id, refresh-packagekit, security, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Cleaning repos: base
Cleaning up Everything
[root@client yum.repos.d]# yum list
省略.........................
[root@client yum.repos.d]# yum makecache
Loaded plugins: product-id, refresh-packagekit, security, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
base | 4.1 kB 00:00 ...
base/group_gz | 211 kB 00:00 ...
base/filelists_db | 3.4 MB 00:00 ...
base/other_db | 1.3 MB 00:00 ...
Metadata Cache Created
[root@client yum.repos.d]#
--安裝缺失的包:
yum install -y compat-libstdc++*
yum install -y elfutils-libelf-devel*
yum install -y gcc*
yum install -y libaio-devel*
yum install -y libstdc++-devel*
6.Creating Required Operating System Groups and Users
新增使用者組oinstall、和oracle使用者:
[root@client Packages]# groupadd oinstall
[root@client Packages]# groupadd dba
[root@client Packages]# useradd -g oinstall -G dba oracle
[root@client Packages]# passwd oracle
Changing password for user oracle.
New password:
BAD PASSWORD: it is based on a dictionary word
BAD PASSWORD: is too simple
Retype new password:
passwd: all authentication tokens updated successfully.
[root@client Packages]#
7.Creating Required Directories
[root@client ~]# mkdir -p /u01/app/oracle
[root@client ~]# chown -R oracle:oinstall /u01/app/oracle/
[root@client ~]# chmod -R 775 /u01/app/oracle/
8.Configuring the oracle User's Environment配置使用者環境變數
[oracle@client ~]$ vi .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/11.2/client
export NLS_LANG="american_america.ZHS16GBK"
export NLS_DATE_FORMAT="YYYY-MM-DD HH24:Mi:SS"
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
~
".bash_profile" 15L, 235C written
[oracle@client ~]$
[oracle@client ~]$ source .bash_profile
[oracle@client ~]$
8.上傳oracle客戶端安裝軟體包:
[oracle@client ~]$ mkdir soft
[oracle@client ~]$ cd soft/
[oracle@client soft]$ ls
[oracle@client soft]$ pwd
/home/oracle/soft
[oracle@client soft]$
[oracle@client soft]$ ls
p13390677_112040_Linux-x86-64_4of7.zip
[oracle@client soft]$ unzip p13390677_112040_Linux-x86-64_4of7.zip
省略...............
9.配置靜默安裝響應檔案
[oracle@client soft]$ ls
client p13390677_112040_Linux-x86-64_4of7.zip
[oracle@client soft]$ cd client/
[oracle@client client]$ ls
install readme.html response runInstaller stage welcome.html
[oracle@client client]$ cd response/
[oracle@client response]$ ls
client_install.rsp netca.rsp
[oracle@client response]$
--先備份響應檔案:
[oracle@client response]$ cp client_install.rsp client_install.rsp.bak
[oracle@client response]$ ls
client_install.rsp client_install.rsp.bak netca.rsp
修改響應檔案:
[oracle@client response]$ vi client_install.rsp
###############################################################################
## Copyright(c) Oracle Corporation 1998,2013. All rights reserved. ##
## ##
## Specify values for the variables listed below to customize ##
## your installation. ##
## ##
## Each variable is associated with a comment. The comment ##
## can help to populate the variables with the appropriate ##
## values. ##
## ##
###############################################################################
#-------------------------------------------------------------------------------
# Do not change the following system generated value.
#-------------------------------------------------------------------------------
oracle.install.responseFileVersion=/oracle/install/rspfmt_clientinstall_response_schema_v11_2_0
#-------------------------------------------------------------------------------
# This variable holds the hostname of the system as set by the user.
# It can be used to force the installation to use an alternative
# hostname rather than using the first hostname found on the system
# (e.g., for systems with multiple hostnames and network interfaces).
ORACLE_HOSTNAME=client
#-------------------------------------------------------------------------------
# Unix group to be set for the inventory directory.
UNIX_GROUP_NAME=oinstall
#-------------------------------------------------------------------------------
# Inventory location.
INVENTORY_LOCATION=/u01/app/oraInventory
#-------------------------------------------------------------------------------
# Specify the languages in which the components will be installed.
#
# en : English ja : Japanese
# fr : French ko : Korean
# ar : Arabic es : Latin American Spanish
# bn : Bengali lv : Latvian
# pt_BR: Brazilian Portuguese lt : Lithuanian
# bg : Bulgarian ms : Malay
# fr_CA: Canadian French es_MX: Mexican Spanish
# ca : Catalan no : Norwegian
# hr : Croatian pl : Polish
# cs : Czech pt : Portuguese
# da : Danish ro : Romanian
# nl : Dutch ru : Russian
# ar_EG: Egyptian zh_CN: Simplified Chinese
# en_GB: English (Great Britain) sk : Slovak
# et : Estonian sl : Slovenian
# fi : Finnish es_ES: Spanish
# de : German sv : Swedish
# el : Greek th : Thai
# iw : Hebrew zh_TW: Traditional Chinese
# hu : Hungarian tr : Turkish
# is : Icelandic uk : Ukrainian
# in : Indonesian vi : Vietnamese
# it : Italian
#
# all_langs : All languages
#
# Specify value as the following to select any of the languages.
# Example : SELECTED_LANGUAGES=en,fr,ja
#
# Specify value as the following to select all the languages.
# Example : SELECTED_LANGUAGES=all_langs
#-------------------------------------------------------------------------------
SELECTED_LANGUAGES=en,zh_CN
#-------------------------------------------------------------------------------
# Complete path of the Oracle Home
ORACLE_HOME=/u01/app/oracle/11.2/client
#-------------------------------------------------------------------------------
# Complete path of the Oracle Base.
ORACLE_BASE=/u01/app/oracle
#-------------------------------------------------------------------------------
#Name : INSTALL_TYPE
#Datatype : String
#Description: Installation type of the component.
#
# The following choices are available. The value should contain
# only one of these choices.
# - InstantClient
# - Administrator
# - Runtime
# - Custom
#
#Example : INSTALL_TYPE = "Administrator"
#------------------------------------------------------------------------------
oracle.install.client.installType=Administrator
#-------------------------------------------------------------------------------
#Name : oracle.install.client.upgrading
#Datatype : boolean
#Description: whether or not this is an upgrade installation
#
# The following choices are available. The value should contain
# only one of these choices.
# - true
# - false
#
#Example : oracle.install.client.upgrading=true
#------------------------------------------------------------------------------
oracle.install.client.upgrading=
#------------------------------------------------------------------------------
# Name : oracle.install.client.customComponents
# Datatype : StringList
#
# This property is considered only if INSTALL_TYPE is set to "Custom"
#
# Description: List of Client Components you would like to install
#
# The following choices are available. You may specify any
# combination of these choices. The components you choose should
# be specified in the form "internal-component-name:version"
# Below is a list of components you may specify to install.
#
# oracle.sqlj:11.2.0.4.0 -- "Oracle SQLJ"
# oracle.rdbms.util:11.2.0.4.0 -- "Oracle Database Utilities"
# oracle.javavm.client:11.2.0.4.0 -- "Oracle Java Client"
# oracle.sqlplus:11.2.0.4.0 -- "SQL*Plus"
# oracle.dbjava.jdbc:11.2.0.4.0 -- "Oracle JDBC/THIN Interfaces"
# oracle.ldap.client:11.2.0.4.0 -- "Oracle Internet Directory Client"
# oracle.rdbms.oci:11.2.0.4.0 -- "Oracle Call Interface (OCI)"
# oracle.precomp:11.2.0.4.0 -- "Oracle Programmer"
# oracle.xdk:11.2.0.4.0 -- "Oracle XML Development Kit"
# oracle.network.aso:11.2.0.4.0 -- "Oracle Advanced Security"
# oracle.assistants.oemlt:11.2.0.4.0 -- "Enterprise Manager Minimal Integration"
# oracle.oraolap.mgmt:11.2.0.4.0 -- "OLAP Analytic Workspace Manager and Worksheet"
# oracle.network.client:11.2.0.4.0 -- "Oracle Net"
# oracle.network.cman:11.2.0.4.0 -- "Oracle Connection Manager"
# oracle.network.listener:11.2.0.4.0 -- "Oracle Net Listener"
# oracle.ordim.client:11.2.0.4.0 -- "Oracle Multimedia Client Option"
# oracle.odbc:11.2.0.4.0 -- "Oracle ODBC Driver"
# oracle.has.client:11.2.0.4.0 -- "Oracle Clusterware High Availability API"
# oracle.dbdev:11.2.0.4.0 -- "Oracle SQL Developer"
# oracle.rdbms.scheduler:11.2.0.4.0 -- "Oracle Scheduler Agent"
#
#-------------------------------------------------------------------------------
oracle.install.client.customComponents="oracle.sqlj:11.2.0.4.0","oracle.rdbms.util:11.2.0.4.0","oracle.javavm.client:11.2.0.4.0","oracle.sqlplus:11.2.0.4.0","oracle.dbjava.jdbc:11.2.0.4.0","oracle.ldap.client:11.2.0.4.0","oracle.rdbms.oci:11.2.0.4.0","oracle.precomp:11.2.0.4.0","oracle.xdk:11.2.0.4.0","oracle.network.aso:11.2.0.4.0","oracle.assistants.oemlt:11.2.0.4.0","oracle.oraolap.mgmt:11.2.0.4.0","oracle.network.client:11.2.0.4.0","oracle.network.cman:11.2.0.4.0","oracle.network.listener:11.2.0.4.0","oracle.ordim.client:11.2.0.4.0","oracle.odbc:11.2.0.4.0","oracle.has.client:11.2.0.4.0","oracle.dbdev:11.2.0.4.0","oracle.rdbms.scheduler:11.2.0.4.0"
#-------------------------------------------------------------------------------
# Host name to be used for by the Oracle Scheduler Agent.
# This needs to be entered in case oracle.rdbms.scheduler is selected in the
# list of custom components during custom install
#
# Example : oracle.install.client.schedulerAgentHostName = acme.domain.com
#------------------------------------------------------------------------------
oracle.install.client.schedulerAgentHostName=
#------------------------------------------------------------------------------
# Port number to be used for by the Oracle Scheduler Agent.
# This needs to be entered in case oracle.rdbms.scheduler is selected in the
# list of custom components during custom install
#
# Example: oracle.install.client.schedulerAgentPortNumber = 1500
#------------------------------------------------------------------------------
oracle.install.client.schedulerAgentPortNumber=
#------------------------------------------------------------------------------
# Specify the auto-updates option. It can be one of the following:
# - MYORACLESUPPORT_DOWNLOAD
# - OFFLINE_UPDATES
# - SKIP_UPDATES
#------------------------------------------------------------------------------
oracle.installer.autoupdates.option=
#------------------------------------------------------------------------------
# In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where
# the updates are to be downloaded.
# In case OFFLINE_UPDATES option is chosen, specify the location where the updates
# are present.
#------------------------------------------------------------------------------
oracle.installer.autoupdates.downloadUpdatesLoc=
#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username which has the patches download privileges
# to be used for software updates.
#
# Example : AUTOUPDATES_MYORACLESUPPORT_USERNAME=abc@oracle.com
#------------------------------------------------------------------------------
AUTOUPDATES_MYORACLESUPPORT_USERNAME=
#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username password which has the patches download privileges
# to be used for software updates.
#
# Example : AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password
#------------------------------------------------------------------------------
AUTOUPDATES_MYORACLESUPPORT_PASSWORD=
#------------------------------------------------------------------------------
# Specify the Proxy server name. Length should be greater than zero.
#
# Example : PROXY_HOST=proxy.domain.com
#------------------------------------------------------------------------------
PROXY_HOST=
#------------------------------------------------------------------------------
# Specify the proxy port number. Should be Numeric and at least 2 chars.
#
# Example : PROXY_PORT=25
#------------------------------------------------------------------------------
PROXY_PORT=
#------------------------------------------------------------------------------
# Specify the proxy user name. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
#
# Example : PROXY_USER=username
#------------------------------------------------------------------------------
PROXY_USER=
#------------------------------------------------------------------------------
# Specify the proxy password. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
#
# Example : PROXY_PWD=password
#------------------------------------------------------------------------------
PROXY_PWD=
#------------------------------------------------------------------------------
# Specify the proxy realm.
#
# Example : PROXY_REALM=metalink
#------------------------------------------------------------------------------
PROXY_REALM=
[oracle@client client]$
[oracle@client response]$
上面看起來內容較多,實際上主要就根據實際環境修改了這些值,其他預設或不填即可:
ORACLE_HOSTNAME=client
UNIX_GROUP_NAME=oinstall
INVENTORY_LOCATION=/u01/app/oraInventory
SELECTED_LANGUAGES=en,zh_CN
ORACLE_HOME=/u01/app/oracle/11.2/client
ORACLE_BASE=/u01/app/oracle
oracle.install.client.installType=Administrator
10.開始靜默安裝客戶端
切換到安裝目錄下,執行下面的命令靜默安裝客戶端
./runInstaller -silent -responseFile /home/oracle/soft/client/response/client_install.rsp
[oracle@client response]$ ls
client_install.rsp client_install.rsp.bak netca.rsp
[oracle@client response]$ pwd
/home/oracle/soft/client/response
[oracle@client response]$ cd ..
[oracle@client client]$ ls
install readme.html response runInstaller stage welcome.html
[oracle@client client]$ ./runInstaller -silent -responseFile /home/oracle/soft/client/response/client_install.rsp
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 19745 MB Passed
Checking swap space: must be greater than 150 MB. Actual 4095 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2017-10-25_11-11-32AM. Please wait ...[oracle@client client]$ You can find the log of this install session at:
/u01/app/oraInventory/logs/installActions2017-10-25_11-11-32AM.log
The installation of Oracle Client 11g was successful.
Please check '/u01/app/oraInventory/logs/silentInstall2017-10-25_11-11-32AM.log' for more details.
As a root user, execute the following script(s):
1. /u01/app/oraInventory/orainstRoot.sh
Successfully Setup Software.
[oracle@client client]$
root執行:
[root@client ~]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory.
Adding read,write permissions for group.
Removing read,write,execute permissions for world.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete.
[root@client ~]#
客戶端安裝完成!!!!!!
測試客戶端:
--配置tns:
[oracle@client admin]$ cd $ORACLE_HOME/network/admin
[oracle@client admin]$ ls
samples shrept.lst
[oracle@client admin]$ vi tnsnames.ora
test =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.56.20)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = test)
)
)
~
"tnsnames.ora" [New] 8L, 171C written
[oracle@client admin]$
[oracle@client admin]$ tnsping test
TNS Ping Utility for Linux: Version 11.2.0.4.0 - Production on 25-OCT-2017 11:56:00
Copyright (c) 1997, 2013, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.56.20)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = test)))
OK (50 msec)
[oracle@client admin]$ sqlplus system/oracle@test
SQL*Plus: Release 11.2.0.4.0 Production on Wed Oct 25 11:56:25 2017
Copyright (c) 1982, 2013, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> show parameter name
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
cell_offloadgroup_name string
db_file_name_convert string
db_name string test
db_unique_name string test
global_names boolean FALSE
instance_name string test
lock_name_space string
log_file_name_convert string
processor_group_name string
service_names string service1,service2,service3
SQL>
完成!!!!!!!!!!!!!!
Oracle Database Client Quick Installation Guide 11g Release 2 (11.2) for Linux x86
首先確認作業系統防火牆和selinux已關閉:
--檢視selinux狀態:sestatus
關閉SELinux的方法:
修改/etc/selinux/config檔案中的SELINUX="" 為 disabled ,然後重啟。
如果不想重啟系統,使用命令setenforce 0
--檢視iptables狀態:service iptables status
關閉防火牆
1)重啟後永久性生效:
開啟: chkconfig iptables on
關閉: chkconfig iptables off
2) 即時生效,重啟後失效:
開啟: service iptables start
關閉: service iptables stop
1. Memory Requirements:At least 256 MB of physical RAM.
# grep MemTotal /proc/meminfo
To determine whether the system architecture can run the software, enter the following command:
# grep "model name" /proc/cpuinfo
To determine the size of the configured swap space, enter the following command:
# grep SwapTotal /proc/meminfo
To determine the available RAM and swap space, enter the following command:
# free
2. Disk Space Requirements
The minimum disk space requirement for a client install in the /tmp directory is 400 MB.
To determine the amount of disk space available in the /tmp directory, enter the following command:
# df -k /tmp
Between 146 MB and 1.38 GB of disk space for the Oracle software, depending on the installation type:
Installation Type Requirement for Software Files
Instant Client 146 MB
Administrator 1.38 GB
Runtime 1.10 GB
3. Operating System Requirements
To determine the distribution and version of Linux installed, enter the following command:
# cat /proc/version
4. Kernel Requirements
For Asianux Server 3, Oracle Linux 5, and Red Hat Enterprise Linux 5:
2.6.18 or later
To determine whether the required kernel is installed, enter the following command:
# uname -r
5.Package Requirements
The following or later version of packages for Asianux Server 3, Oracle Linux 5, and Red Hat Enterprise Linux 5 should be installed:
binutils-2.17.50.0.6
compat-libstdc++-33-3.2.3
elfutils-libelf-0.125
elfutils-libelf-devel-0.125
elfutils-libelf-devel-static-0.125
gcc-4.1.2
gcc-c++-4.1.2
glibc-2.5-24
glibc-common-2.5
glibc-devel-2.5
ksh-20060214
libaio-0.3.106
libaio-devel-0.3.106
libgcc-4.1.2
libgomp-4.1.2
libstdc++-4.1.2
libstdc++-devel-4.1.2
make-3.81
sysstat-7.0.2
作業系統檢查:
rpm -q binutils compat-libstdc++-33 elfutils-libelf elfutils-libelf-devel gcc gcc-c++ glibc glibc-common glibc-devel libaio libaio-devel libgcc libstdc++ libstdc++-devel make sysstat
[root@client ~]# rpm -q binutils compat-libstdc++-33 elfutils-libelf elfutils-libelf-devel gcc gcc-c++ glibc glibc-common glibc-devel libaio libaio-devel libgcc libstdc++ libstdc++-devel make sysstat
binutils-2.20.51.0.2-5.43.el6.x86_64
package compat-libstdc++-33 is not installed
elfutils-libelf-0.161-3.el6.x86_64
package elfutils-libelf-devel is not installed
package gcc is not installed
package gcc-c++ is not installed
glibc-2.12-1.166.el6.x86_64
glibc-common-2.12-1.166.el6.x86_64
glibc-devel-2.12-1.166.el6.x86_64
libaio-0.3.107-10.el6.x86_64
package libaio-devel is not installed
libgcc-4.4.7-16.el6.x86_64
libstdc++-4.4.7-16.el6.x86_64
package libstdc++-devel is not installed
make-3.81-20.el6.x86_64
sysstat-9.0.4-27.el6.x86_64
[root@client ~]#
yum install -y compat-libstdc++*
yum install -y elfutils-libelf-devel*
yum install -y gcc*
yum install -y libaio-devel*
yum install -y libstdc++-devel*
掛載光碟,配置yum源:
[root@client ~]# mount /dev/cdrom /mnt
mount: block device /dev/sr0 is write-protected, mounting read-only
[root@client ~]#
[root@client ~]# vi /etc/yum.repos.d/yum.repo
[base]
name=base
baseurl=file:///mnt/Server
enabled=1
gpgcheck=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
[root@client yum.repos.d]#
[root@client yum.repos.d]#
[root@client yum.repos.d]# yum clean all
Loaded plugins: product-id, refresh-packagekit, security, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Cleaning repos: base
Cleaning up Everything
[root@client yum.repos.d]# yum list
省略.........................
[root@client yum.repos.d]# yum makecache
Loaded plugins: product-id, refresh-packagekit, security, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
base | 4.1 kB 00:00 ...
base/group_gz | 211 kB 00:00 ...
base/filelists_db | 3.4 MB 00:00 ...
base/other_db | 1.3 MB 00:00 ...
Metadata Cache Created
[root@client yum.repos.d]#
--安裝缺失的包:
yum install -y compat-libstdc++*
yum install -y elfutils-libelf-devel*
yum install -y gcc*
yum install -y libaio-devel*
yum install -y libstdc++-devel*
6.Creating Required Operating System Groups and Users
新增使用者組oinstall、和oracle使用者:
[root@client Packages]# groupadd oinstall
[root@client Packages]# groupadd dba
[root@client Packages]# useradd -g oinstall -G dba oracle
[root@client Packages]# passwd oracle
Changing password for user oracle.
New password:
BAD PASSWORD: it is based on a dictionary word
BAD PASSWORD: is too simple
Retype new password:
passwd: all authentication tokens updated successfully.
[root@client Packages]#
7.Creating Required Directories
[root@client ~]# mkdir -p /u01/app/oracle
[root@client ~]# chown -R oracle:oinstall /u01/app/oracle/
[root@client ~]# chmod -R 775 /u01/app/oracle/
8.Configuring the oracle User's Environment配置使用者環境變數
[oracle@client ~]$ vi .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/11.2/client
export NLS_LANG="american_america.ZHS16GBK"
export NLS_DATE_FORMAT="YYYY-MM-DD HH24:Mi:SS"
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
~
".bash_profile" 15L, 235C written
[oracle@client ~]$
[oracle@client ~]$ source .bash_profile
[oracle@client ~]$
8.上傳oracle客戶端安裝軟體包:
[oracle@client ~]$ mkdir soft
[oracle@client ~]$ cd soft/
[oracle@client soft]$ ls
[oracle@client soft]$ pwd
/home/oracle/soft
[oracle@client soft]$
[oracle@client soft]$ ls
p13390677_112040_Linux-x86-64_4of7.zip
[oracle@client soft]$ unzip p13390677_112040_Linux-x86-64_4of7.zip
省略...............
9.配置靜默安裝響應檔案
[oracle@client soft]$ ls
client p13390677_112040_Linux-x86-64_4of7.zip
[oracle@client soft]$ cd client/
[oracle@client client]$ ls
install readme.html response runInstaller stage welcome.html
[oracle@client client]$ cd response/
[oracle@client response]$ ls
client_install.rsp netca.rsp
[oracle@client response]$
--先備份響應檔案:
[oracle@client response]$ cp client_install.rsp client_install.rsp.bak
[oracle@client response]$ ls
client_install.rsp client_install.rsp.bak netca.rsp
修改響應檔案:
[oracle@client response]$ vi client_install.rsp
###############################################################################
## Copyright(c) Oracle Corporation 1998,2013. All rights reserved. ##
## ##
## Specify values for the variables listed below to customize ##
## your installation. ##
## ##
## Each variable is associated with a comment. The comment ##
## can help to populate the variables with the appropriate ##
## values. ##
## ##
###############################################################################
#-------------------------------------------------------------------------------
# Do not change the following system generated value.
#-------------------------------------------------------------------------------
oracle.install.responseFileVersion=/oracle/install/rspfmt_clientinstall_response_schema_v11_2_0
#-------------------------------------------------------------------------------
# This variable holds the hostname of the system as set by the user.
# It can be used to force the installation to use an alternative
# hostname rather than using the first hostname found on the system
# (e.g., for systems with multiple hostnames and network interfaces).
ORACLE_HOSTNAME=client
#-------------------------------------------------------------------------------
# Unix group to be set for the inventory directory.
UNIX_GROUP_NAME=oinstall
#-------------------------------------------------------------------------------
# Inventory location.
INVENTORY_LOCATION=/u01/app/oraInventory
#-------------------------------------------------------------------------------
# Specify the languages in which the components will be installed.
#
# en : English ja : Japanese
# fr : French ko : Korean
# ar : Arabic es : Latin American Spanish
# bn : Bengali lv : Latvian
# pt_BR: Brazilian Portuguese lt : Lithuanian
# bg : Bulgarian ms : Malay
# fr_CA: Canadian French es_MX: Mexican Spanish
# ca : Catalan no : Norwegian
# hr : Croatian pl : Polish
# cs : Czech pt : Portuguese
# da : Danish ro : Romanian
# nl : Dutch ru : Russian
# ar_EG: Egyptian zh_CN: Simplified Chinese
# en_GB: English (Great Britain) sk : Slovak
# et : Estonian sl : Slovenian
# fi : Finnish es_ES: Spanish
# de : German sv : Swedish
# el : Greek th : Thai
# iw : Hebrew zh_TW: Traditional Chinese
# hu : Hungarian tr : Turkish
# is : Icelandic uk : Ukrainian
# in : Indonesian vi : Vietnamese
# it : Italian
#
# all_langs : All languages
#
# Specify value as the following to select any of the languages.
# Example : SELECTED_LANGUAGES=en,fr,ja
#
# Specify value as the following to select all the languages.
# Example : SELECTED_LANGUAGES=all_langs
#-------------------------------------------------------------------------------
SELECTED_LANGUAGES=en,zh_CN
#-------------------------------------------------------------------------------
# Complete path of the Oracle Home
ORACLE_HOME=/u01/app/oracle/11.2/client
#-------------------------------------------------------------------------------
# Complete path of the Oracle Base.
ORACLE_BASE=/u01/app/oracle
#-------------------------------------------------------------------------------
#Name : INSTALL_TYPE
#Datatype : String
#Description: Installation type of the component.
#
# The following choices are available. The value should contain
# only one of these choices.
# - InstantClient
# - Administrator
# - Runtime
# - Custom
#
#Example : INSTALL_TYPE = "Administrator"
#------------------------------------------------------------------------------
oracle.install.client.installType=Administrator
#-------------------------------------------------------------------------------
#Name : oracle.install.client.upgrading
#Datatype : boolean
#Description: whether or not this is an upgrade installation
#
# The following choices are available. The value should contain
# only one of these choices.
# - true
# - false
#
#Example : oracle.install.client.upgrading=true
#------------------------------------------------------------------------------
oracle.install.client.upgrading=
#------------------------------------------------------------------------------
# Name : oracle.install.client.customComponents
# Datatype : StringList
#
# This property is considered only if INSTALL_TYPE is set to "Custom"
#
# Description: List of Client Components you would like to install
#
# The following choices are available. You may specify any
# combination of these choices. The components you choose should
# be specified in the form "internal-component-name:version"
# Below is a list of components you may specify to install.
#
# oracle.sqlj:11.2.0.4.0 -- "Oracle SQLJ"
# oracle.rdbms.util:11.2.0.4.0 -- "Oracle Database Utilities"
# oracle.javavm.client:11.2.0.4.0 -- "Oracle Java Client"
# oracle.sqlplus:11.2.0.4.0 -- "SQL*Plus"
# oracle.dbjava.jdbc:11.2.0.4.0 -- "Oracle JDBC/THIN Interfaces"
# oracle.ldap.client:11.2.0.4.0 -- "Oracle Internet Directory Client"
# oracle.rdbms.oci:11.2.0.4.0 -- "Oracle Call Interface (OCI)"
# oracle.precomp:11.2.0.4.0 -- "Oracle Programmer"
# oracle.xdk:11.2.0.4.0 -- "Oracle XML Development Kit"
# oracle.network.aso:11.2.0.4.0 -- "Oracle Advanced Security"
# oracle.assistants.oemlt:11.2.0.4.0 -- "Enterprise Manager Minimal Integration"
# oracle.oraolap.mgmt:11.2.0.4.0 -- "OLAP Analytic Workspace Manager and Worksheet"
# oracle.network.client:11.2.0.4.0 -- "Oracle Net"
# oracle.network.cman:11.2.0.4.0 -- "Oracle Connection Manager"
# oracle.network.listener:11.2.0.4.0 -- "Oracle Net Listener"
# oracle.ordim.client:11.2.0.4.0 -- "Oracle Multimedia Client Option"
# oracle.odbc:11.2.0.4.0 -- "Oracle ODBC Driver"
# oracle.has.client:11.2.0.4.0 -- "Oracle Clusterware High Availability API"
# oracle.dbdev:11.2.0.4.0 -- "Oracle SQL Developer"
# oracle.rdbms.scheduler:11.2.0.4.0 -- "Oracle Scheduler Agent"
#
#-------------------------------------------------------------------------------
oracle.install.client.customComponents="oracle.sqlj:11.2.0.4.0","oracle.rdbms.util:11.2.0.4.0","oracle.javavm.client:11.2.0.4.0","oracle.sqlplus:11.2.0.4.0","oracle.dbjava.jdbc:11.2.0.4.0","oracle.ldap.client:11.2.0.4.0","oracle.rdbms.oci:11.2.0.4.0","oracle.precomp:11.2.0.4.0","oracle.xdk:11.2.0.4.0","oracle.network.aso:11.2.0.4.0","oracle.assistants.oemlt:11.2.0.4.0","oracle.oraolap.mgmt:11.2.0.4.0","oracle.network.client:11.2.0.4.0","oracle.network.cman:11.2.0.4.0","oracle.network.listener:11.2.0.4.0","oracle.ordim.client:11.2.0.4.0","oracle.odbc:11.2.0.4.0","oracle.has.client:11.2.0.4.0","oracle.dbdev:11.2.0.4.0","oracle.rdbms.scheduler:11.2.0.4.0"
#-------------------------------------------------------------------------------
# Host name to be used for by the Oracle Scheduler Agent.
# This needs to be entered in case oracle.rdbms.scheduler is selected in the
# list of custom components during custom install
#
# Example : oracle.install.client.schedulerAgentHostName = acme.domain.com
#------------------------------------------------------------------------------
oracle.install.client.schedulerAgentHostName=
#------------------------------------------------------------------------------
# Port number to be used for by the Oracle Scheduler Agent.
# This needs to be entered in case oracle.rdbms.scheduler is selected in the
# list of custom components during custom install
#
# Example: oracle.install.client.schedulerAgentPortNumber = 1500
#------------------------------------------------------------------------------
oracle.install.client.schedulerAgentPortNumber=
#------------------------------------------------------------------------------
# Specify the auto-updates option. It can be one of the following:
# - MYORACLESUPPORT_DOWNLOAD
# - OFFLINE_UPDATES
# - SKIP_UPDATES
#------------------------------------------------------------------------------
oracle.installer.autoupdates.option=
#------------------------------------------------------------------------------
# In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where
# the updates are to be downloaded.
# In case OFFLINE_UPDATES option is chosen, specify the location where the updates
# are present.
#------------------------------------------------------------------------------
oracle.installer.autoupdates.downloadUpdatesLoc=
#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username which has the patches download privileges
# to be used for software updates.
#
# Example : AUTOUPDATES_MYORACLESUPPORT_USERNAME=abc@oracle.com
#------------------------------------------------------------------------------
AUTOUPDATES_MYORACLESUPPORT_USERNAME=
#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username password which has the patches download privileges
# to be used for software updates.
#
# Example : AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password
#------------------------------------------------------------------------------
AUTOUPDATES_MYORACLESUPPORT_PASSWORD=
#------------------------------------------------------------------------------
# Specify the Proxy server name. Length should be greater than zero.
#
# Example : PROXY_HOST=proxy.domain.com
#------------------------------------------------------------------------------
PROXY_HOST=
#------------------------------------------------------------------------------
# Specify the proxy port number. Should be Numeric and at least 2 chars.
#
# Example : PROXY_PORT=25
#------------------------------------------------------------------------------
PROXY_PORT=
#------------------------------------------------------------------------------
# Specify the proxy user name. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
#
# Example : PROXY_USER=username
#------------------------------------------------------------------------------
PROXY_USER=
#------------------------------------------------------------------------------
# Specify the proxy password. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
#
# Example : PROXY_PWD=password
#------------------------------------------------------------------------------
PROXY_PWD=
#------------------------------------------------------------------------------
# Specify the proxy realm.
#
# Example : PROXY_REALM=metalink
#------------------------------------------------------------------------------
PROXY_REALM=
[oracle@client client]$
[oracle@client response]$
上面看起來內容較多,實際上主要就根據實際環境修改了這些值,其他預設或不填即可:
ORACLE_HOSTNAME=client
UNIX_GROUP_NAME=oinstall
INVENTORY_LOCATION=/u01/app/oraInventory
SELECTED_LANGUAGES=en,zh_CN
ORACLE_HOME=/u01/app/oracle/11.2/client
ORACLE_BASE=/u01/app/oracle
oracle.install.client.installType=Administrator
10.開始靜默安裝客戶端
切換到安裝目錄下,執行下面的命令靜默安裝客戶端
./runInstaller -silent -responseFile /home/oracle/soft/client/response/client_install.rsp
[oracle@client response]$ ls
client_install.rsp client_install.rsp.bak netca.rsp
[oracle@client response]$ pwd
/home/oracle/soft/client/response
[oracle@client response]$ cd ..
[oracle@client client]$ ls
install readme.html response runInstaller stage welcome.html
[oracle@client client]$ ./runInstaller -silent -responseFile /home/oracle/soft/client/response/client_install.rsp
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 19745 MB Passed
Checking swap space: must be greater than 150 MB. Actual 4095 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2017-10-25_11-11-32AM. Please wait ...[oracle@client client]$ You can find the log of this install session at:
/u01/app/oraInventory/logs/installActions2017-10-25_11-11-32AM.log
The installation of Oracle Client 11g was successful.
Please check '/u01/app/oraInventory/logs/silentInstall2017-10-25_11-11-32AM.log' for more details.
As a root user, execute the following script(s):
1. /u01/app/oraInventory/orainstRoot.sh
Successfully Setup Software.
[oracle@client client]$
root執行:
[root@client ~]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory.
Adding read,write permissions for group.
Removing read,write,execute permissions for world.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete.
[root@client ~]#
客戶端安裝完成!!!!!!
測試客戶端:
--配置tns:
[oracle@client admin]$ cd $ORACLE_HOME/network/admin
[oracle@client admin]$ ls
samples shrept.lst
[oracle@client admin]$ vi tnsnames.ora
test =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.56.20)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = test)
)
)
~
"tnsnames.ora" [New] 8L, 171C written
[oracle@client admin]$
[oracle@client admin]$ tnsping test
TNS Ping Utility for Linux: Version 11.2.0.4.0 - Production on 25-OCT-2017 11:56:00
Copyright (c) 1997, 2013, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.56.20)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = test)))
OK (50 msec)
[oracle@client admin]$ sqlplus system/oracle@test
SQL*Plus: Release 11.2.0.4.0 Production on Wed Oct 25 11:56:25 2017
Copyright (c) 1982, 2013, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> show parameter name
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
cell_offloadgroup_name string
db_file_name_convert string
db_name string test
db_unique_name string test
global_names boolean FALSE
instance_name string test
lock_name_space string
log_file_name_convert string
processor_group_name string
service_names string service1,service2,service3
SQL>
完成!!!!!!!!!!!!!!
來自 “ ITPUB部落格 ” ,連結:http://blog.itpub.net/31397003/viewspace-2146354/,如需轉載,請註明出處,否則將追究法律責任。
相關文章
- oracle客戶端無人值守安裝 靜默安裝Oracle客戶端
- oracle11g客戶端靜默安裝Oracle客戶端
- inux下靜默安裝,升級和刪除Oracle客戶端UXOracle客戶端
- 靜默方式安裝11gR2
- 靜默方式安裝database vault 10.2.0.4Database
- Android靜默安裝和靜默解除安裝Android
- rac靜默安裝
- dbca 靜默安裝
- Oracle 靜默安裝Oracle
- Oracle靜默安裝Oracle
- Oracle 客戶端安裝Oracle客戶端
- MySQL 客戶端安裝MySql客戶端
- zabbix 客戶端安裝客戶端
- oracle客戶端安裝Oracle客戶端
- 靜默方式安裝、升級oracle(一): 安裝oracle軟體Oracle
- 靜默方式安裝oracle 11g 完整攻略Oracle
- Android靜默安裝應用和靜默解除安裝應用Android
- PackageInstaller 5.0原始碼分析靜默安裝與靜默解除安裝Package原始碼
- 靜默安裝Azure CLI
- 靜默安裝ORACLE(文件)Oracle
- 使用靜默方式安裝11g資料庫資料庫
- aix安裝oracle客戶端AIOracle客戶端
- Ceph的客戶端安裝客戶端
- Git-客戶端安裝Git客戶端
- centos安裝oracle客戶端CentOSOracle客戶端
- CentOS安裝git客戶端CentOSGit客戶端
- oracle靜默安裝raw裝置Oracle
- 靜默方式安裝、升級oracle(二): 建立資料庫Oracle資料庫
- 靜默安裝oracle時報錯Oracle
- ORACLE 11.2.0.4靜默安裝Oracle
- 靜默安裝oracle軟體Oracle
- Oracle靜默安裝(單機)Oracle
- 靜默安裝、建庫(轉)
- 靜默安裝ORACLE 軟體Oracle
- Oracle靜默安裝說明Oracle
- Windows下安裝redis客戶端WindowsRedis客戶端
- db2 客戶端安裝DB2客戶端
- linux安裝mysql客戶端LinuxMySql客戶端