PostgreSQL多值列的選擇性-Statistics,Cardinality,Selectivity,Estimate
標籤
PostgreSQL , 多值列 , 選擇性評估 , Statistics , Cardinality , Selectivity , Estimate
背景
基於成本的優化器，選擇性估算是重要的環節，對於單值列，通過表的行數，資料分佈柱狀圖、高頻值、唯一值比例、空值比例等統計資訊（pg_class, pg_stats），以及使用者輸入的條件，可以估算得到輸入條件的選擇性。
對於多個條件的估算，之前PG給了比較暴力的AND,OR的疊加選擇性計算。
PG 10開始，支援多列統計資訊定義，從而提高了多列條件的選擇性評估精準度。
但是對於多值列，以及一些特殊的型別或操作符條件，過濾性的評估依舊有改進空間。
例如：
JSON型別的操作，範圍型別的操作，空間型別的評估等。
例如用於計算“包含”的選擇性如下：
postgres=# select oprname,oprleft::regtype,oprright::regtype,oprresult::regtype,oprrest from pg_operator where oprrest::text ~ `contsel`;
oprname | oprleft | oprright | oprresult | oprrest
---------+----------+----------+-----------+--------------
<@ | polygon | polygon | boolean | contsel
@> | polygon | polygon | boolean | contsel
<@ | box | box | boolean | contsel
@> | box | box | boolean | contsel
<@ | point | box | boolean | contsel
@> | box | point | boolean | contsel
<@ | point | polygon | boolean | contsel
@> | polygon | point | boolean | contsel
<@ | point | circle | boolean | contsel
@> | circle | point | boolean | contsel
<@ | circle | circle | boolean | contsel
@> | circle | circle | boolean | contsel
&& | anyarray | anyarray | boolean | arraycontsel
@> | anyarray | anyarray | boolean | arraycontsel
<@ | anyarray | anyarray | boolean | arraycontsel
@ | polygon | polygon | boolean | contsel
~ | polygon | polygon | boolean | contsel
@ | box | box | boolean | contsel
~ | box | box | boolean | contsel
@ | circle | circle | boolean | contsel
~ | circle | circle | boolean | contsel
@> | tsquery | tsquery | boolean | contsel
<@ | tsquery | tsquery | boolean | contsel
@@ | text | text | boolean | contsel
@@ | text | tsquery | boolean | contsel
-|- | anyrange | anyrange | boolean | contsel
@> | jsonb | jsonb | boolean | contsel
? | jsonb | text | boolean | contsel
?| | jsonb | text[] | boolean | contsel
?& | jsonb | text[] | boolean | contsel
<@ | jsonb | jsonb | boolean | contsel
(31 rows)
本文為轉載文章，分析了json型別選擇時，如何計算選擇性。
(目前此類為寫死的選擇性值，程式碼中已經給出了原因)。
src/backend/utils/adt/geo_selfuncs.c:contsel(PG_FUNCTION_ARGS)
/*
* Selectivity functions for geometric operators. These are bogus -- unless
* we know the actual key distribution in the index, we can`t make a good
* prediction of the selectivity of these operators.
*
* Note: the values used here may look unreasonably small. Perhaps they
* are. For now, we want to make sure that the optimizer will make use
* of a geometric index if one is available, so the selectivity had better
* be fairly small.
*
* In general, GiST needs to search multiple subtrees in order to guarantee
* that all occurrences of the same key have been found. Because of this,
* the estimated cost for scanning the index ought to be higher than the
* output selectivity would indicate. gistcostestimate(), over in selfuncs.c,
* ought to be adjusted accordingly --- but until we can generate somewhat
* realistic numbers here, it hardly matters...
*/
.........................
/*
* contsel -- How likely is a box to contain (be contained by) a given box?
*
* This is a tighter constraint than "overlap", so produce a smaller
* estimate than areasel does.
*/
Datum
contsel(PG_FUNCTION_ARGS)
{
PG_RETURN_FLOAT8(0.001);
}
陣列，由於陣列支援了柱狀圖，所以“包含”選擇性計算時，是基於統計資訊的。
src/backend/utils/adt/array_selfuncs.c:arraycontsel(PG_FUNCTION_ARGS)
/*
* arraycontsel -- restriction selectivity for array @>, &&, <@ operators
*/
Datum
arraycontsel(PG_FUNCTION_ARGS)
{
PlannerInfo *root = (PlannerInfo *) PG_GETARG_POINTER(0);
Oid operator = PG_GETARG_OID(1);
List *args = (List *) PG_GETARG_POINTER(2);
int varRelid = PG_GETARG_INT32(3);
VariableStatData vardata;
Node *other;
bool varonleft;
Selectivity selec;
Oid element_typeid;
/*
* If expression is not (variable op something) or (something op
* variable), then punt and return a default estimate.
*/
if (!get_restriction_variable(root, args, varRelid,
&vardata, &other, &varonleft))
PG_RETURN_FLOAT8(DEFAULT_SEL(operator));
/*
* Can`t do anything useful if the something is not a constant, either.
*/
if (!IsA(other, Const))
{
ReleaseVariableStats(vardata);
PG_RETURN_FLOAT8(DEFAULT_SEL(operator));
}
/*
* The "&&", "@>" and "<@" operators are strict, so we can cope with a
* NULL constant right away.
*/
if (((Const *) other)->constisnull)
{
ReleaseVariableStats(vardata);
PG_RETURN_FLOAT8(0.0);
}
/*
* If var is on the right, commute the operator, so that we can assume the
* var is on the left in what follows.
*/
if (!varonleft)
{
if (operator == OID_ARRAY_CONTAINS_OP)
operator = OID_ARRAY_CONTAINED_OP;
else if (operator == OID_ARRAY_CONTAINED_OP)
operator = OID_ARRAY_CONTAINS_OP;
}
/*
* OK, there`s a Var and a Const we`re dealing with here. We need the
* Const to be an array with same element type as column, else we can`t do
* anything useful. (Such cases will likely fail at runtime, but here
* we`d rather just return a default estimate.)
*/
element_typeid = get_base_element_type(((Const *) other)->consttype);
if (element_typeid != InvalidOid &&
element_typeid == get_base_element_type(vardata.vartype))
{
selec = calc_arraycontsel(&vardata, ((Const *) other)->constvalue,
element_typeid, operator);
}
else
{
selec = DEFAULT_SEL(operator);
}
ReleaseVariableStats(vardata);
CLAMP_PROBABILITY(selec);
PG_RETURN_FLOAT8((float8) selec);
}
原文
https://blog.anayrat.info/en/2017/11/26/postgresql—jsonb-and-statistics/
正文
Table of Contents
- Statistics, cardinality, selectivity
- Search on JSONB
- Dataset
- Operators and indexing for JSONB
- Selectivity on JSONB
- Diving in the code
- Functional indexes
- Creating the function and the index
- Search using a function
- Another example and selectivity calculation
- Consequences of a bad estimate
- Last word
Statistics, cardinality, selectivity
SQL is a declarative language. It is a language where the user asks what he wants. Without specifying how the computer should proceed to get the results.
It is the DBMS that must find “how” to perform the operation by ensuring:
- Return the right result
- Ideally, as soon as possible
“As soon as possible” means:
- Minimize disk access
- Give priority to sequential readings (especially important for mechanical disks)
- Reduce the number of CPU operations
- Reduce memory footprint
To do this, a DBMS has an optimizer whose role is to find the best execution plan.
PostgreSQL has an optimizer based on a cost mechanism. Without going into details, each operation has a unit cost (reading a sequential block, CPU processing of a record …). Postgres calculates the cost of several execution plans (if the query is simple) and chooses the least expensive.
How can postgres estimate the cost of a plan? By estimating the cost of each node of the plan based on statistics. PostgreSQL analyzes tables to obtain a statistical sample (this operation is normally performed by the autovacuum daemon).
Some words of vocabulary:
Cardinality: In set theory, it is the number of elements in a set. In databases, it will be the number of rows in a table or after applying a predicate.
Selectivity: Fraction of records returned after applying a predicate. For example, a table containing people and about one third of them are children. The selectivity of the predicate person = `child` will be 0.33.
If this table contains 300 people (this is the cardinality of the “people” set), we can estimate the number of children because we know that the predicate person = `child` is 0.33:
300 * 0.33 = 99
These estimates can be obtained with EXPLAIN which displays the execution plan.
Example (simplified):
explain (analyze, timing off) select * from t1 WHERE c1=1;
QUERY PLAN
------------------------------------------------------------------------------
Seq Scan on t1 (cost=0.00..5.75 rows=100 ...) (actual rows=100 ...)
Filter: (c1 = 1)
Rows Removed by Filter: 200
(cost=0.00..5.75 rows=100 …) : Indicates the estimated cost and the estimated number of records (rows).
(actual rows=100 …) : Indicates the number of records obtained.
PostgreSQL documentation provides examples of estimation calculations : Row Estimation Examples
It is quite easy to understand how to obtain estimates from scalar data types.
How are things going for particular types? For example JSON?
Search on JSONB
Dataset
As in previous articles, I used the stackoverflow dataset. I created a new table by aggregating data from multiple tables into a JSON object:
CREATE TABLE json_stack AS
SELECT t.post_id,
row_to_json(t,
TRUE)::jsonb json
FROM
(SELECT posts.id post_id,
posts.owneruserid,
users.id,
title,
tags,
BODY,
displayname,
websiteurl,
LOCATION,
aboutme,
age
FROM posts
JOIN users ON posts.owneruserid = users.id) t;
The processing is quite long because the two tables involved total nearly 40GB.
So I get a 40GB table that looks like this:
dt+ json_stack
List of relations
Schema | Name | Type | Owner | Size | Description
--------+------------+-------+----------+-------+-------------
public | json_stack | table | postgres | 40 GB |
(1 row)
d json_stack
Table "public.json_stack"
Column | Type | Collation | Nullable | Default
---------+---------+-----------+----------+---------
post_id | integer | | |
json | jsonb | | |
select post_id,jsonb_pretty(json) from json_stack
where json_displayname(json) = `anayrat` limit 1;
post_id |
----------+-----------------------------------------------------------------------------------------
26653490 | {
| "id": 4197886,
| "age": null,
| "body": "<p>I have an issue with date filter. I follow [...]
| "tags": "<java><logstash>",
| "title": "Logstash date filter failed parsing",
| "aboutme": "<p>Sysadmin, Postgres DBA</p>
",
| "post_id": 26653490,
| "location": "Valence",
| "websiteurl": "https://blog.anayrat.info",
| "displayname": "anayrat",
| "owneruserid": 4197886
| }
Operators and indexing for JSONB
PostgreSQL provides several operators for querying JSONB 1. We will use the operator @>.
It is also possible to index JSONB using GIN indexes:
create index ON json_stack using gin (json );
Finally, here is an example of query:
explain (analyze,buffers) select * from json_stack
where json @> `{"displayname":"anayrat"}`::jsonb;
QUERY PLAN
---------------------------------------------------------------------------------------
Bitmap Heap Scan on json_stack
(cost=286.95..33866.98 rows=33283 width=1011)
(actual time=0.099..0.102 rows=2 loops=1)
Recheck Cond: (json @> `{"displayname": "anayrat"}`::jsonb)
Heap Blocks: exact=2
Buffers: shared hit=17
-> Bitmap Index Scan on json_stack_json_idx
(cost=0.00..278.62 rows=33283 width=0)
(actual time=0.092..0.092 rows=2 loops=1)
Index Cond: (json @> `{"displayname": "anayrat"}`::jsonb)
Buffers: shared hit=15
Planning time: 0.088 ms
Execution time: 0.121 ms
(9 rows)
Reading this plan we see that postgres is completely wrong. He estimates getting 33,283 lines, but the query returns only two rows. The error factor is around 15,000!
Selectivity on JSONB
What is the cardinality of the table? The information is contained in the system catalog:
select reltuples from pg_class where relname = `json_stack`;
reltuples
-------------
3.32833e+07
What is the estimated selectivity?
select 33283 / 3.32833e+07;
?column?
------------------------
0.00099999098647069251
Arround 0.001.
Diving in the code
I had fun taking out the debugger GDB to find out where this number could come from. I ended up arriving in this function:
[...]
79 /*
80 * contsel -- How likely is a box to contain (be contained by) a given box?
81 *
82 * This is a tighter constraint than "overlap", so produce a smaller
83 * estimate than areasel does.
84 */
85
86 Datum
87 contsel(PG_FUNCTION_ARGS)
88 {
89 PG_RETURN_FLOAT8(0.001);
90 }
[...]
The selectivity depends on the type of the operator. Let’s look in the system catalog:
select oprname,typname,oprrest from pg_operator op
join pg_type typ ON op.oprleft= typ.oid where oprname = `@>`;
oprname | typname | oprrest
---------+----------+--------------
@> | polygon | contsel
@> | box | contsel
@> | box | contsel
@> | path | -
@> | polygon | contsel
@> | circle | contsel
@> | _aclitem | -
@> | circle | contsel
@> | anyarray | arraycontsel
@> | tsquery | contsel
@> | anyrange | rangesel
@> | anyrange | rangesel
@> | jsonb | contsel
There are several types, in fact the operator @> means (roughly): “Does the object on the left contain the right element?”. It is used for different types: geometry, array …
In our case, does the left JSONB object contain the ``{" displayname ":" anayrat "}`` element?
A JSON object is a special type. Determining the selectivity of an element would be quite complex. The comment is quite explicit:
25 /*
26 * Selectivity functions for geometric operators. These are bogus -- unless
27 * we know the actual key distribution in the index, we can`t make a good
28 * prediction of the selectivity of these operators.
29 *
30 * Note: the values used here may look unreasonably small. Perhaps they
31 * are. For now, we want to make sure that the optimizer will make use
32 * of a geometric index if one is available, so the selectivity had better
33 * be fairly small.
[...]
It is therefore not possible (currently) to determine the selectivity of JSONB objects.
But all is not lost
Functional indexes
PostgreSQL permits to creates so-called functional indexes. We create an index on a fonction.
You’re going to say, “Yes, but we do not need it.” In your example, postgres is already using an index.
That’s right, the difference is that postgres collects statistics about this index. As if the result of the function was a new column.
Creating the function and the index
It is very simple :
CREATE or replace FUNCTION json_displayname (jsonb )
RETURNS text
AS $$
select $1->>`displayname`
$$
LANGUAGE SQL IMMUTABLE PARALLEL SAFE
;
create index ON json_stack (json_displayname(json));
Search using a function
To use the index we just created, use it in the query:
explain (analyze,verbose,buffers) select * from json_stack
where json_displayname(json) = `anayrat`;
QUERY PLAN
----------------------------------------------------------------------------
Index Scan using json_stack_json_displayname_idx on public.json_stack
(cost=0.56..371.70 rows=363 width=1011)
(actual time=0.021..0.023 rows=2 loops=1)
Output: post_id, json
Index Cond: ((json_stack.json ->> `displayname`::text) = `anayrat`::text)
Buffers: shared hit=7
Planning time: 0.107 ms
Execution time: 0.037 ms
(6 rows)
This time postgres estimates to get 363 rows, which is much closer to the final result (2).
Another example and selectivity calculation
This time we will search on the “age” field of the JSON object:
explain (analyze,buffers) select * from json_stack
where json @> `{"age":27}`::jsonb;
QUERY PLAN
---------------------------------------------------------------------
Bitmap Heap Scan on json_stack
(cost=286.95..33866.98 rows=33283 width=1011)
(actual time=667.411..12723.906 rows=804630 loops=1)
Recheck Cond: (json @> `{"age": 27}`::jsonb)
Rows Removed by Index Recheck: 2211190
Heap Blocks: exact=391448 lossy=344083
Buffers: shared hit=576350 read=881510
I/O Timings: read=2947.458
-> Bitmap Index Scan on json_stack_json_idx
(cost=0.00..278.62 rows=33283 width=0)
(actual time=562.648..562.648 rows=804644 loops=1)
Index Cond: (json @> `{"age": 27}`::jsonb)
Buffers: shared hit=9612 read=5140
I/O Timings: read=11.195
Planning time: 0.073 ms
Execution time: 12809.392 ms
(12 lignes)
set work_mem = `100MB`;
explain (analyze,buffers) select * from json_stack
where json @> `{"age":27}`::jsonb;
QUERY PLAN
---------------------------------------------------------------------
Bitmap Heap Scan on json_stack
(cost=286.95..33866.98 rows=33283 width=1011)
(actual time=748.968..5720.628 rows=804630 loops=1)
Recheck Cond: (json @> `{"age": 27}`::jsonb)
Rows Removed by Index Recheck: 14
Heap Blocks: exact=735531
Buffers: shared hit=123417 read=780542
I/O Timings: read=1550.124
-> Bitmap Index Scan on json_stack_json_idx
(cost=0.00..278.62 rows=33283 width=0)
(actual time=545.553..545.553 rows=804644 loops=1)
Index Cond: (json @> `{"age": 27}`::jsonb)
Buffers: shared hit=9612 read=5140
I/O Timings: read=11.265
Planning time: 0.079 ms
Execution time: 5796.219 ms
(12 lignes)
In this example we see that postgres still estimates 33,283 records. Out he gets 804 644. This time he is too much optimistic.
P.S: In my example you will see that I run the same query by modifying work_mem. This is to prevent the bitmap from being lossy
As seen above we can create a function:
CREATE or replace FUNCTION json_age (jsonb )
RETURNS text
AS $$
select $1->>`age`
$$
LANGUAGE SQL IMMUTABLE PARALLEL SAFE
;
create index ON json_stack (json_age(json));
Again the estimate is much better:
explain (analyze,buffers) select * from json_stack
where json_age(json) = `27`;
QUERY PLAN
------------------------------------------------------------------------
Index Scan using json_stack_json_age_idx on json_stack
(cost=0.56..733177.05 rows=799908 width=1011)
(actual time=0.042..2355.179 rows=804630 loops=1)
Index Cond: ((json ->> `age`::text) = `27`::text)
Buffers: shared read=737720
I/O Timings: read=1431.275
Planning time: 0.087 ms
Execution time: 2410.269 ms
Postgres estimates to get 799,908 records. we will check it.
As I said, Postgres has statistics information based on a sample of data. This information is stored in a readable system catalog with the pg_stats view. With a functional index, Postgres sees it as a new column.
schemaname | public
tablename | json_stack_json_age_idx
attname | json_age
[...]
most_common_vals | {28,27,29,31,26,30,32,25,33,34,36,24,[...]}
most_common_freqs | {0.0248,0.0240333,0.0237333,0.0236333,0.0234,0.0229333,[...]}
[...]
The column most_common_vals contains the most common values and the column most_common_freqs the corresponding selectivity.
So for age = 27 we have a selectivity of 0.0240333.
這裡使用了表示式時，PostgreSQL 評估為一對一輸出，即輸入一個A值返回一個與A相關的值，所以計算選擇性可以使用原始列的柱狀圖。
《PostgreSQL 11 preview – 表示式索引柱狀圖bucketsSTATISTICSdefault_statistics_target可設定》
https://www.postgresql.org/docs/10/static/catalog-pg-proc.html
Then we just have to multiply the selectivity by the cardinality of the table:
select n_live_tup from pg_stat_all_tables where relname =`json_stack`;
n_live_tup
------------
33283258
select 0.0240333 * 33283258;
?column?
----------------
799906.5244914
Okay, estimate is much better. But is it serious if postgres is wrong? In the two queries above we see that postgres uses an index and that the result is obtained quickly.
Consequences of a bad estimate
How can a bad estimate be a problem?
When that leads to the choice of a bad plan.
For example, this aggregation query that counts the number of posts by age:
explain (analyze,buffers) select json->`age`,count(json->`age`)
from json_stack group by json->`age` ;
QUERY PLAN
--------------------------------------------------------------------------------------
Finalize GroupAggregate
(cost=10067631.49..14135810.84 rows=33283256 width=40)
(actual time=364151.518..411524.862 rows=86 loops=1)
Group Key: ((json -> `age`::text))
Buffers: shared hit=1949354 read=1723941, temp read=1403174 written=1403189
I/O Timings: read=155401.828
-> Gather Merge
(cost=10067631.49..13581089.91 rows=27736046 width=40)
(actual time=364151.056..411524.589 rows=256 loops=1)
Workers Planned: 2
Workers Launched: 2
Buffers: shared hit=1949354 read=1723941, temp read=1403174 written=1403189
I/O Timings: read=155401.828
-> Partial GroupAggregate
(cost=10066631.46..10378661.98 rows=13868023 width=40)
(actual time=363797.836..409187.566 rows=85 loops=3)
Group Key: ((json -> `age`::text))
Buffers: shared hit=5843962 read=5177836,
temp read=4212551 written=4212596
I/O Timings: read=478460.123
-> Sort
(cost=10066631.46..10101301.52 rows=13868023 width=1042)
(actual time=299775.029..404358.743 rows=11094533 loops=3)
Sort Key: ((json -> `age`::text))
Sort Method: external merge Disk: 11225392kB
Buffers: shared hit=5843962 read=5177836,
temp read=4212551 written=4212596
I/O Timings: read=478460.123
-> Parallel Seq Scan on json_stack
(cost=0.00..4791997.29 rows=13868023 width=1042)
(actual time=0.684..202361.133 rows=11094533 loops=3)
Buffers: shared hit=5843864 read=5177836
I/O Timings: read=478460.123
Planning time: 0.080 ms
Execution time: 411688.165 ms
Postgres expects to get 33,283,256 records instead of 86. It also performed a very expensive sort since it generated more than 33GB (11GB * 3 loops) of temporary files.
The same query using the json_age function:
explain (analyze,buffers) select json_age(json),count(json_age(json))
from json_stack group by json_age(json);
QUERY PLAN
--------------------------------------------------------------------------------------
Finalize GroupAggregate
(cost=4897031.22..4897033.50 rows=83 width=40)
(actual time=153985.585..153985.667 rows=86 loops=1)
Group Key: ((json ->> `age`::text))
Buffers: shared hit=1938334 read=1736761
I/O Timings: read=106883.908
-> Sort
(cost=4897031.22..4897031.64 rows=166 width=40)
(actual time=153985.581..153985.598 rows=256 loops=1)
Sort Key: ((json ->> `age`::text))
Sort Method: quicksort Memory: 37kB
Buffers: shared hit=1938334 read=1736761
I/O Timings: read=106883.908
-> Gather
(cost=4897007.46..4897025.10 rows=166 width=40)
(actual time=153985.264..153985.360 rows=256 loops=1)
Workers Planned: 2
Workers Launched: 2
Buffers: shared hit=1938334 read=1736761
I/O Timings: read=106883.908
-> Partial HashAggregate
(cost=4896007.46..4896008.50 rows=83 width=40)
(actual time=153976.620..153976.635 rows=85 loops=3)
Group Key: (json ->> `age`::text)
Buffers: shared hit=5811206 read=5210494
I/O Timings: read=320684.515
-> Parallel Seq Scan on json_stack
(cost=0.00..4791997.29 rows=13868023 width=1042)
(actual time=0.090..148691.566 rows=11094533 loops=3)
Buffers: shared hit=5811206 read=5210494
I/O Timings: read=320684.515
Planning time: 0.118 ms
Execution time: 154086.685 ms
Here postgres sorts later on a lot less lines. The execution time is significantly reduced and we save especially 33GB of temporary files.
Last word
Statistics are essential for choosing the best execution plan. Currently Postgres has advanced features for JSON Unfortunately there is no possibility to add statistics on the JSONB type. Note that PostgreSQL 10 provides the infrastructure to extend statistics. Hopefully in the future it will be possible to extend them for special types.
In the meantime, it is possible to work around this limitation by using functional indexes.
1、https://www.postgresql.org/docs/current/static/functions-json.html
2、A bitmap node becomes lossy when postgres can not make a bitmap of all tuples. It thus passes in so-called “lossy” mode where the bitmap is no longer on the tuple but for the entire block. This requires reading more blocks and doing a “recheck” which consists in filtering obtained tuples. ^
3、The documentation is very complete and provides many examples: use of operators, indexing. ^
Related
PostgreSQL 10 : ICU & Abbreviated Keys
PostgreSQL 10 : Performances improvements
PGDay : How does Full Text Search works?
PostgreSQL 10 and Logical replication – Setup
PostgreSQL 10 and Logical replication – Overview
相關文章
- PostgreSQL：資料庫的選擇SQL資料庫
- 聊聊mysql的單列多值儲存MySql
- PostgreSQL資料庫多列複合索引的欄位順序選擇原理SQL資料庫索引
- mysql一列多值多屬性設計-亂穿馬路MySql
- 陣列選擇排序陣列排序
- Oracle 計算欄位選擇性 判別列的索引潛力Oracle索引
- jQuery有選擇性的禁止文字選中jQuery
- xgboost 特徵選擇，篩選特徵的正要性特徵
- 分散式 PostgreSQL 叢集(Citus)，分散式表中的分佈列選擇最佳實踐分散式SQL
- PostgreSQL/Lightdb 更改列屬性語法SQL
- [CSS]屬性選擇器CSS
- 使用 CSS 選擇器實現對不含 title 屬性元素的選擇CSS
- ArcPy批量選擇指定屬性的要素
- CSS3新增選擇器（屬性選擇器、結構偽類選擇器、偽元素選擇器）CSSS3
- 商品屬性的選擇功能的實現
- 【Data Pump】理解expdp中的ESTIMATE和ESTIMATE_ONLY引數
- 【TUNE_ORACLE】檢視每個列的選擇性和基數SQL參考OracleSQL
- 談選擇、選擇對應的結果與玩家規劃能力的重要性
- CSS筆記——屬性選擇器CSS筆記
- 如何選擇非易失性SRAM
- [譯]JS Tips:選擇（picking）和反選（rejecting）物件的屬性JS物件
- 7.40 CARDINALITY
- 2-如何選擇訊息佇列佇列
- 為什麼你應當選擇 PostgreSQL 而不是 Oracle？SQLOracle
- 12.8學習日報（背景簡寫、選擇器繼承性、選擇器的權重）繼承
- 如何從效能角度選擇陣列的遍歷方式陣列
- PostgreSQL DBA(171) - PG 13（pg_stat_statements to track planning statistics）SQL
- 精讀《使用 CSS 屬性選擇器》CSS
- Python中XGBoost的特性重要性和特性選擇Python
- 基於 mpvue 框架的小程式選擇元件，支援單列，多列，級聯Vue框架元件
- HTML 單選按鈕實現 （性別選擇）(解讀)HTML
- 如何為微服務選擇正確的訊息佇列微服務佇列
- win10工作管理員怎麼選擇列_win10開啟工作管理員選擇列操作步驟Win10
- BeanUtils.copyProperties 選擇性賦值欄位Bean賦值
- 【譯】用CSS屬性選擇器來拼接HTML的DNACSSHTML
- git合併分支，如果選擇性的合併檔案？Git
- 是列舉？還是常量？其實很好選擇！
- 如何在Oracle表中選擇主鍵列BWOracle