1: 不同的終端使用不同的unix主機上的不同業務

需求:終端0/1/2應用對公業務;終端3/4/5/6/7應用儲蓄業務

[Router] tty enable 使能終端接入服務功能
[Router] tty-app sender connect 0-2 10.0.1.2 9001 1 duigong 0-2對公業務
[Router] tty-app sender connect 3-7 10.0.1.1 9000 1 chuxu
3-7儲蓄業務

[Router] interface Serial0
[Router-Serial0] clock DTECLK1
[Router-Serial0] link-protocol ppp
[Router-Serial0] ip address 10.0.0.1 255.255.255.0

[Router] interface Async0
[Router-Async0]undo modem
[Router-Async0] async mode tty 0 0 0 16000
[Router-Async0] link-protocol ppp

[Router] interface Async1
[Router-Async1] undo modem
[Router-Async1] async mode tty 1 0 1 16000
[Router-Async1] link-protocol ppp

[Router] interface Async2
[Router-Async2] undo modem
[Router-Async2] async mode tty 2 0 2 16000
[Router-Async2] link-protocol ppp
!
[Router] interface Async3
[Router-Async3] undo modem
[Router-Async3] async mode tty 3 0 3 16000
[Router-Async3] link-protocol ppp
!
[Router] interface Async4
[Router-Async4] undo modem
[Router-Async4] async mode tty 4 0 4 16000
[Router-Async4] link-protocol ppp
!
[Router] interface Async5
[Router-Async5] undo modem
[Router-Async5] async mode tty 5 0 5 16000 link-protocol ppp
!
[Router] interface Async6
[Router-Async6] undo modem
[Router-Async6] async mode tty 6 0 6 16000
[Router-Async6] link-protocol ppp
!
[Router] interface Async7
[Router-Async7] undo modem
[Router-Async7] async mode tty 7 0 7 16000
[Router-Async7] link-protocol ppp

[Router] ip route-static 0.0.0.0 0.0.0.0 10.0.0.2 preference 60
!
quit
儲蓄unix主機10.0.1.1的ttyd.conf內容:
severport 9000
mode 1
squitsize 512
readsize 300
interval 200
nodelay 1
debug 0
ttyp50 10.0.0.1 3
ttyp51 10.0.0.1 4
ttyp52 10.0.0.1 5
ttyp53 10.0.0.1 6
ttyp54 10.0.0.1 7

對公unix主機10.0.1.2的ttyd.conf內容:
severport 9001
mode 1
squitsize 512
readsize 300
interval 200
nodelay 1
debug 0
ttyp50 10.0.0.1 0
ttyp51 10.0.0.1 1
ttyp52 10.0.0.1 2

2：不同終端使用同一unix主機上的不同業務
需求:對公儲蓄業務均在一臺unix主機上執行;終端0/1/2應用對公業務,終端3/4/5/6/7應用儲蓄業務

[Router] Tty enable 使能終端接入服務功能
[Router] tty-app sender connect 0-2 10.0.1.1 9001 1 duigong 0-2對公
[Router] tty-app sender connect 3-7 10.0.1.1 9000 1 chuxu
3-7儲蓄
[Router] interface Serial0

[Router-Serial0] clock DTECLK1
[Router-Serial0] link-protocol ppp
[Router-Serial0] ip address 10.0.0.1 255.255.255.0
!
[Router] interface Async0
[Router-Async0] undo modem
[Router-Async0] async mode tty 0 0 0 16000 請注意數字顏色
[Router-Async0] link-protocol ppp 與上下文對應關係
!
[Router] interface Async1
[Router-Async1] undo modem
[Router-Async1] async mode tty 1 0 1 16000
[Router-Async1] link-protocol ppp
!
[Router] interface Async2
[Router-Async2] undo modem
[Router-Async2] async mode tty 2 0 2 16000
[Router-Async2] link-protocol ppp
!
[Router] interface Async3
[Router-Async3] undo modem
[Router-Async3] async mode tty 3 0 3 16000
[Router-Async3] link-protocol ppp
!
[Router] interface Async4
[Router-Async4] undo modem
[Router-Async4] async mode tty 4 0 4 16000
[Router-Async4] link-protocol ppp
!
[Router] interface Async5
[Router-Async5] undo modem
[Router-Async5] async mode tty 5 0 5 16000
[Router-Async5] link-protocol ppp
!
[Router] interface Async6
[Router-Async6] undo modem
[Router-Async6] async mode tty 6 0 6 16000
[Router-Async6] link-protocol ppp
!
interface Async7
[Router] undo modem
[Router-Async7] async mode tty 7 0 7 16000
[Router-Async7] link-protocol ppp
!
quit
[Router] ip route-static 0.0.0.0 0.0.0.0 10.0.0.2 preference 60
!
return

unix主機10.0.1.1儲蓄的ttyd1.conf內容:
severport 9000
mode 1
squitsize 512
readsize 300
interval 200
nodelay 1
debug 0
ttyp50 10.0.0.1 3
ttyp51 10.0.0.1 4
ttyp52 10.0.0.1 5
ttyp53 10.0.0.1 6
ttyp54 10.0.0.1 7

unix主機10.0.1.1對公的ttyd2.conf內容:
severport 9001
mode 1
squitsize 512
readsize 300
interval 200
nodelay 1
debug 0
ttyp60 10.0.0.1 0
ttyp61 10.0.0.1 1
ttyp62 10.0.0.1 2

3：同一終端同時使用多種業務
需求: 終端0/1可以處理儲蓄,對公,記賬,外匯四項業務
終端2/3可以處理儲蓄,對公,記賬三項業務
終端4/5可以處理儲蓄,記賬兩項業務
終端6/7可以處理儲蓄業務
切換按鍵為ctrl＋6,對應的anscii值為30

!
version 1.74
[Router] tty enable
[Router] tty-app sender connection 0 10.0.1.1 9000 1 chuxu
[Router] tty-app sender connection 1 10.0.1.1 9001 1 duigong
[Router] tty-app sender connection 2 10.0.1.2 9002 1 jizhang
[Router] tty-app sender connection 3 10.0.1.2 9003 1 waihui
[Router] tty-app sender connection 4 10.0.1.1 9000 1 chuxu
[Router] tty-app sender connection 5 10.0.1.1 9001 1 duigong
[Router] tty-app sender connection 6 10.0.1.2 9002 1 jizhang

[Router] tty-app sender connection 7 10.0.1.2 9003 1 waihui
[Router] tty-app sender connection 8 10.0.1.1 9000 1 chuxu
[Router] tty-app sender connection 9 10.0.1.1 9001 1 duigong
[Router] tty-app sender connection 10 10.0.1.2 9002 1 jizhang
[Router] tty-app sender connection 11 10.0.1.1 9000 1 chuxu
[Router] tty-app sender connection 12 10.0.1.1 9001 1 duigong
[Router] tty-app sender connection 13 10.0.1.2 9002 1 jizhang
[Router] tty-app sender connection 14 10.0.1.1 9000 1 chuxu
[Router] tty-app sender connection 15 10.0.1.2 9002 1 jizhang
[Router] tty-app sender connection 16 10.0.1.1 9000 1 chuxu
[Router] tty-app sender connection 17 10.0.1.2 9002 1 jizhang
[Router] tty-app sender connection 18 10.0.1.1 9000 1 chuxu
[Router] tty-app sender connection 19 10.0.1.1 9000 1 chuxu
!
[Router] interface Serial0
[Router-Serial0] clock DTECLK1
[Router-Serial0] link-protocol ppp
[Router-Serial0] ip address 10.0.0.1 255.255.255.0
!
[Router] interface Async0
[Router-Async0] undo modem
[Router-Async0] async mode tty 0 0 0
[Router-Async0] async mode tty 0 1 1
[Router-Async0] async mode tty 0 2 2
[Router-Async0] async mode tty 0 3 3
[Router-Async0] tty menu-key 30
[Router-Async0] link-protocol ppp
!
[Router] interface Async1
[Router-Async1] undo modem
[Router-Async1] async mode tty 1 0 4
[Router-Async1] async mode tty 1 1 5
[Router-Async1] async mode tty 1 2 6
[Router-Async1] async mode tty 1 3 7
[Router-Async1] tty menu-key 30
[Router-Async1] link-protocol ppp
!
[Router] interface Async2
[Router-Async2] undo modem
[Router-Async2] async mode tty 2 0 8
[Router-Async2] async mode tty 2 1 9
[Router-Async2] async mode tty 2 2 10
[Router-Async2] tty menu-key 30
[Router-Async2] link-protocol ppp
!
[Router] interface Async3
[Router-Async3] undo modem
[Router-Async3] async mode tty 3 0 11
[Router-Async3] async mode tty 3 1 12
[Router-Async3] async mode tty 3 2 13
[Router-Async3] tty menu-key 30
[Router-Async3] link-protocol ppp
!
[Router] interface Async4
[Router-Async4] undo modem
[Router-Async4] async mode tty 4 0 14
[Router-Async4] async mode tty 4 1 15
[Router-Async4] tty menu-key 30
[Router-Async4] link-protocol ppp
!
[Router] interface Async5
[Router-Async5] undo modem
[Router-Async5] async mode tty 5 0 16
[Router-Async5] async mode tty 5 1 17
[Router-Async5] tty menu-key 30
[Router-Async5] link-protocol ppp
!
[Router] interface Async6
[Router-Async6] undo modem
[Router-Async6] async mode tty 6 0 18
[Router-Async6] link-protocol ppp
!
[Router] interface Async7
[Router-Async7] undo modem
[Router-Async7] async mode tty 7 0 19
[Router-Async7] link-protocol ppp
!
[Router-Async7] quit
[Router] ip route-static 0.0.0.0 0.0.0.0 10.0.0.2 preference 60
!
quit

unix主機10.0.1.1儲蓄的ttyd1.conf內容:
severport 9000
mode 1
screen 1
squitsize 512
readsize 300
interval 200
nodelay 1
debug 0
ttyp50 10.0.0.1 0
ttyp51 10.0.0.1 1
ttyp52 10.0.0.1 2
ttyp53 10.0.0.1 3
ttyp54 10.0.0.1 4
ttyp55 10.0.0.1 5
ttyp56 10.0.0.1 6
ttyp57 10.0.0.1 7

unix主機10.0.1.1對公的ttyd2.conf內容:
severport 9001
mode 1
screen 1
squitsize 512
readsize 300
interval 200
nodelay 1
debug 0
ttyp60 10.0.0.1 0
ttyp61 10.0.0.1 1
ttyp62 10.0.0.1 2
ttyp63 10.0.0.1 3

unix主機10.0.1.2記賬的ttyd1.conf內容:
severport 9002
mode 1
screen 1
squitsize 512
readsize 300
interval 200
nodelay 1
debug 0
ttyp70 10.0.0.1 0
ttyp71 10.0.0.1 1
ttyp72 10.0.0.1 2
ttyp73 10.0.0.1 3
ttyp74 10.0.0.1 4
ttyp75 10.0.0.1 5

unix主機10.0.1.2外匯的ttyd2.conf內容:
severport 9003
mode 1
screen 1
squitsize 512
readsize 300
interval 200
nodelay 1
debug 0
ttyp80 10.0.0.1 0
ttyp81 10.0.0.1 1[@more@]

銀行網路配置

相關文章