解除安裝virbr0 xenbr0 虛擬網路卡
[root@localhost ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:E0:4C:40:49:79
inet addr:192.168.12.16 Bcast:192.168.12.255 Mask:255.255.255.0
inet6 addr: fe80::2e0:4cff:fe40:4979/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1595 errors:0 dropped:0 overruns:0 frame:0
TX packets:264 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:165962 (162.0 KiB) TX bytes:37643 (36.7 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2919 errors:0 dropped:0 overruns:0 frame:0
TX packets:2919 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4226556 (4.0 MiB) TX bytes:4226556 (4.0 MiB)
peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:2470 errors:0 dropped:0 overruns:0 frame:0
TX packets:342 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:219605 (214.4 KiB) TX bytes:52273 (51.0 KiB)
Interrupt:5 Base address:0x8c00
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:291 errors:0 dropped:0 overruns:0 frame:0
TX packets:1610 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:41737 (40.7 KiB) TX bytes:166862 (162.9 KiB)
virbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:10160 (9.9 KiB)
xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:1375 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:125483 (122.5 KiB) TX bytes:0 (0.0 b)
其實會出現這樣的問題是libvirtd ,xend這些服務開啟的。這也是網橋的模式。
把libvirtd 和 xend 這兩個服務關掉並且禁止系統啟動時開啟服務。
#/etc/init.d/libvirtd stop
#/etc/init.d/xend stop
#chkconfig libvirtd off
#chkconfig xend off
[root@localhost ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:E0:4C:40:49:79
inet addr:192.168.12.16 Bcast:192.168.12.255 Mask:255.255.255.0
inet6 addr: fe80::2e0:4cff:fe40:4979/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:611 errors:0 dropped:0 overruns:0 frame:0
TX packets:147 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:66775 (65.2 KiB) TX bytes:18823 (18.3 KiB)
Interrupt:5 Base address:0x4c00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1559 errors:0 dropped:0 overruns:0 frame:0
TX packets:1559 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3118312 (2.9 MiB) TX bytes:3118312 (2.9 MiB)
正常了。。
eth0 Link encap:Ethernet HWaddr 00:E0:4C:40:49:79
inet addr:192.168.12.16 Bcast:192.168.12.255 Mask:255.255.255.0
inet6 addr: fe80::2e0:4cff:fe40:4979/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1595 errors:0 dropped:0 overruns:0 frame:0
TX packets:264 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:165962 (162.0 KiB) TX bytes:37643 (36.7 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2919 errors:0 dropped:0 overruns:0 frame:0
TX packets:2919 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4226556 (4.0 MiB) TX bytes:4226556 (4.0 MiB)
peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:2470 errors:0 dropped:0 overruns:0 frame:0
TX packets:342 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:219605 (214.4 KiB) TX bytes:52273 (51.0 KiB)
Interrupt:5 Base address:0x8c00
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:291 errors:0 dropped:0 overruns:0 frame:0
TX packets:1610 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:41737 (40.7 KiB) TX bytes:166862 (162.9 KiB)
virbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:10160 (9.9 KiB)
xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:1375 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:125483 (122.5 KiB) TX bytes:0 (0.0 b)
其實會出現這樣的問題是libvirtd ,xend這些服務開啟的。這也是網橋的模式。
把libvirtd 和 xend 這兩個服務關掉並且禁止系統啟動時開啟服務。
#/etc/init.d/libvirtd stop
#/etc/init.d/xend stop
#chkconfig libvirtd off
#chkconfig xend off
[root@localhost ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:E0:4C:40:49:79
inet addr:192.168.12.16 Bcast:192.168.12.255 Mask:255.255.255.0
inet6 addr: fe80::2e0:4cff:fe40:4979/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:611 errors:0 dropped:0 overruns:0 frame:0
TX packets:147 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:66775 (65.2 KiB) TX bytes:18823 (18.3 KiB)
Interrupt:5 Base address:0x4c00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1559 errors:0 dropped:0 overruns:0 frame:0
TX packets:1559 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3118312 (2.9 MiB) TX bytes:3118312 (2.9 MiB)
正常了。。
來自 “ ITPUB部落格 ” ,連結:http://blog.itpub.net/90618/viewspace-1063987/,如需轉載,請註明出處,否則將追究法律責任。
相關文章
- vmware虛擬網路卡驅動無法安裝
- 虛擬機器網路卡配置虛擬機
- Win10系統安裝VMware虛擬機器沒有顯示虛擬網路卡如何解決Win10虛擬機
- Linux 虛擬網路卡技術:MacvlanLinuxMac
- Linux虛擬網路卡TUN和TAPLinux
- win10無線網路卡驅動解除安裝不了怎麼辦_win10無線網路卡驅動無法解除安裝如何解決Win10
- KVM虛擬機器新增物理網路卡虛擬機
- win10如何修改虛擬網路卡ip_win10虛擬網路卡怎麼設定ip地址Win10
- Centos安裝vncserver虛擬網路控制檯CentOSVNCServer
- 安裝虛擬機器虛擬機
- win10 解除網路卡限速怎麼解除_win10網路卡限速如何解除Win10
- 國產網路卡:虛擬化應用,民族品牌
- LEDE 虛擬機器安裝虛擬機
- ubuntu虛擬機器安裝Ubuntu虛擬機
- 虛擬印表機怎麼安裝 win10虛擬印表機安裝的方法Win10
- 安裝python虛擬環境並配置虛擬環境以及安裝scrapy模組Python
- Centos7.7安裝vncserver虛擬網路控制檯CentOSVNCServer
- Ubuntu 18.04 LTS安裝vncserver虛擬網路控制檯UbuntuVNCServer
- Ubuntu系統安裝VNC虛擬網路控制檯UbuntuVNC
- VMware安裝CentOS虛擬機器與配置網路CentOS虛擬機
- VMware 安裝 Centos 7 虛擬機器配置網路CentOS虛擬機
- 在 fnOS上安裝 KVM 虛擬化,並使用 Cockpit 網頁管理虛擬機器KPI網頁虛擬機
- Windows10系統新增虛擬網路卡的方法Windows
- Linux中虛擬網路卡是什麼?有何作用?Linux
- MacOS安裝虛擬機器教程Mac虛擬機
- 使用虛擬機器安裝Kail虛擬機AI
- Mac 安裝Windows虛擬機器MacWindows虛擬機
- CentOS 7 安裝虛擬機器CentOS虛擬機
- kvm 安裝 windows 虛擬機器Windows虛擬機
- Linux 安裝 KVM 虛擬機器Linux虛擬機
- 虛擬機器Tomcat的安裝虛擬機Tomcat
- vmware解除安裝不乾淨,重灌不了問題;裝了虛擬機器上不了網問題;裝了虛擬機器發現windows在cmd中ping不了虛擬機器,虛擬機器能ping的了windows;secureCRT或者filezilla連線虛擬機WindowsSecurecrt
- ASM入網小助手解除安裝ASM
- 虛擬機器安裝教程win10安裝步驟 win10系統如何安裝虛擬系統虛擬機Win10
- Android studio虛擬模擬器安裝問題Android
- win10無線網路卡驅動解除安裝如何操作_win10怎麼刪除電腦無線網路卡驅動Win10
- win10安裝xp虛擬機器安裝教程_win10安裝xp虛擬機器詳細步驟Win10虛擬機
- 【kubernetes】網路虛擬網路卡對veth pair、flannel網路模型實現原理AI模型
- Win 10 安裝 Python 虛擬環境Python