如何給 GoPro 拍攝的影片新增時間水印 All In One

xgqfrms發表於2024-11-04

如何給 GoPro 拍攝的影片新增時間水印 All In One

執法記錄儀

時間水印

時間水印是指在拍攝的照片或影片上新增一個顯示時間的標識。
這個標識通常以數字的形式出現在畫面的一個角落，它顯示了拍攝的具體日期和時間。
時間水印的目的是為了記錄下拍攝的時間，以便使用者可以更好地回顧和分享他們的經歷。

solutions

GoPro Labs

https://gopro.github.io/labs/

Firmware /韌體

實驗室提供實驗性韌體程式，該程式使用二維碼來控制您的相機並擴充套件相機的功能，超越庫存功能。
它在無法透過語音傳達設定、WiFi 不可用、未建立應用程式配對或高階設定（例如多臺相機時間同步或延遲相機觸發）的情況下特別有用。
您不會丟失 GoPro 上任何預先存在的模式或功能，此更新只是增加了更多功能。
安裝安全，使用安全，只有擴充套件功能是實驗性的，預設情況下它們都處於關閉狀態。

~~https://bit.ly/LABS_H13_1_20_70~~

https://github.com/gopro/labs/raw/master/docs/firmware/lfs/LABS_HERO13_01_20_70.zip

https://gopro.github.io/labs/install/

github

https://github.com/gopro/labs/

https://github.com/gopro/labs/tree/master/docs/firmware/lfs

https://github.com/gopro/labs/blob/master/docs/firmware/lfs/LABS_HERO13_01_20_70.zip

GoPro QR Code Creator

https://gopro.github.io/labs/control/custom/

GoPro QR Code ❓

第一步，GoPro 的 SD 卡必須先刷入/安裝對應版本的最新 Labs 韌體
使用 GoPro 掃描透過時間戳命令引數配置生成的二維碼 ✅

https://gopro.github.io/labs/control/overlays/

QR Control for Labs Enabled Cameras

https://gopro.github.io/labs/control/

html2canvas

https://html2canvas.hertzen.com/

GoPro Labs Command Language

mV - is shorthand for mode Video - this is the same a swiping the camera to use video mode.
r4 - set resolution to 4K (16:9), r4T (for 4K 4:3) and r4X (for HERO11-13s 8:7)
p60 - set the frame rate to 60 fps
x-.5 - exposure compensation is set to -0.5
cF - color Flat
w55 - white balance to 5500K

The Full List of Settings and Option Commands

Mode commands:

mV - mode Video
mVL - mode Video Looping (*)
mP - mode Photo
mT - mode Timelapse video ()
mTP - mode Timelapse Photo ()
mTW - mode TimeWarp
mPB - mode Photo Burst
mPN - mode Photo Night
mNL - mode Night-Lapse Video ()
mNP - mode Night-Lapse Photo ()
mL - mode Live-Burst Photo (HERO10 only)
mST - mode Star Trails (HERO11-13 only)
mLP - mode Light Painting (HERO11-13 only)
mLT - mode Vehicle Lights (HERO11-13 only)

Defaults modes (on power up):

dL - last used mode
dV - last used Video mode
dP - last used Photo mode
dT - last used Timelapse mode

Resolutions:

r1 or r10 or r1080 - 1920x1080
r1T or r14 or r1440 - 1920x1440
r1V - 1080x1920 HD Vertical Video (H13)
r2 or r27 - for 2.7K 16x9
r2T or r27T - for 2.7K Tall the 4x3 mode
r3 - 3K 360° for GoPro MAX
r4 - 4k 16x9
r4T - 4k Tall, the 4:3 mode
r4X - 4k eXtreme, the 8:7 mode (H11-13)
r4S - 4k Square, the 1:1 mode using Ultra Wide (H13)
r4V - 2160x3840 4K Vertical Video (H13)
r5 - 5.3k for HERO and 5.6K 360° for GoPro MAX
r5T - 5k Tall, the 4:3 mode (H10)
r5X - 5k eXtreme, the 8:7 mode (H11-13)

Frame rates:

p24 - 24 fps
p25 - 25 fps
p30 - 30 fps
p50 - 50 fps
p60 - 60 fps
p100 - 100 fps
p120 - 120 fps
p200 - 200 fps
p240 - 240 fps

Timelapse and NightLapse frame rates:

p2 (0.5s or 2Hz/2p capture)
p1 (1s interval)
p.2 (2s interval)
p.5 (5s interval)
p.10 through p.3600 (10s to 60m interval)

Lens - FOV:

fN - Narrow (older models)
fM - Medium (older models)
fW - Wide
fL - Linear
fS - Superview
fV - HyperView (H11-13)
fH - Horizonal Level + Linear (H9-13)
fX - SuperMax Wide (Max Lens Mod)

Audio (Raw controls):

aL - Low Processing
aM - Medium Processing
aH - High Processing
Bitrate:
b0 - Standard Bitrate
b1 - High Bitrate

Color:

cF - Color Flat
cG - Color Vibrant (old GoPro Color)
cN - Color Natural (H10-13)

Depth (H11/12 only):

d0 or d8 - 8-bit color
d1 or d10 - 10-bit color

EIS (Hypersmooth control):

e0 - Off
e1 or just *e - On
e2 - High
e3 - Boost
e4 - Auto

Exposure Lock:

eL0 - Off
eL1 - On
eL2 - eL9 - Lock after 2 to 9 seconds.

Hindsight (Video modes H9-13):

hS0 - Off
hS1 - On 15s window
hS2 - On 30s window
hS5 - Experimental Labs H11-13 - 5s window

White Balance:

wA - Auto White Balance
w23 - 2300K White balance
w28, w32, w40, w45 - 2800K, 3200K, 4000K, 4500K
w50, w55, w60, w65 - 5000K, 5500K, 6000K, 6500K
wN - Native White Balance (sensor raw)

...

https://gopro.github.io/labs/control/tech/