RedHat 9.0上ADSL最終解決方案(轉)

RedHat 9.0上ADSL最終解決方案(轉)[@more@]

在網上一些BBS看了很多關於ADSL的文章,都沒有解決我的REDHAT9上ADSL上網的問題,今天實在是沒有辦法,重新建立連線,曲折的經歷,終於上網了(非常激動,可能表達的不是很好),特的寫下我的過程,作為參考:

REDHAAT預設的PPPOE有問題,需要RPM -E,然後,安裝這個

(北南兄推薦)

解壓和安裝：

#tar zxvf rp-pppoe-3.5.tar.gz

進入解壓目錄執行

#sh ./go

然後再來設定ADSL。這一處，我們要用命令。

#adsl-setup

Welcome to the Roaring Penguin ADSL client setup. First, I will run some checks on your system to make sure the PPPoE client is installed

properly...

Looks good! Now, please enter some information:

USER NAME

>>> Enter your PPPoE user name (default XXX): 在這裡輸入ADSL的使用者名稱

INTERFACE

>>> Enter the Ethernet interface connected to the ADSL modem For Solaris, this is likely to be something like /dev/hme0.

For Linux, it will be ethn, where n is a number.

(default eth0):如果一張網路卡就設定寫上eth0

Do you want the link to come up on demand, or stay up continuously?

If you want it to come up on demand, enter the idle time in seconds after which the link should be dropped. If you want the link to stay up permanently, enter no (two letters, lower-case.)

NOTE: Demand-activated links do not interact well with dynamic IP addresses. You may have some problems with demand-activated links.

>>> Enter the demand value (default no):不用寫什麼 DNS

Please enter the IP address of your ISPs primary DNS server.

If your ISP claims that the server will provide DNS addresses,

enter server (all lower-case) here.

If you just press enter, I will assume you know what you are doing and not modify your DNS setup.

>>> Enter the DNS information here:在這裡寫上202.96.134.133

下一個DNS是202.96.168.68 //這裡根據個人不同可以修改

PASSWORD

>>> Please enter your PPPoE password:輸入密碼

>>> Please re-enter your PPPoE password:再輸入一次

FIREWALLING

Please choose the firewall rules to use. Note that these rules are very basic. You are strongly encouraged to use a more sophisticated firewall setup; however, these will provide basic security. If you are running any servers on your machine, you must choose NONE and set up firewalling yourself. Otherwise, the firewall rules will deny access to all standard servers like Web, e-mail, ftp, etc. If you are using SSH, the rules will block outgoing SSH connections which allocate a privileged source port.

The firewall choices are:

0 - NONE: This script will not set any firewall rules. You are responsible for ensuring the security of your machine. You are STRONGLY

recommended to use some kind of firewall rules.

1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation

2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway

for a LAN

>>> Choose a type of firewall (0-2):這裡添寫為2

** Summary of what you entered **

Ethernet Interface: eth0

User name: XXX

Activate-on-demand: No

DNS: Do not adjust

Firewalling: MASQUERADE

>>> Accept these settings and adjust configuration files (y/n)?

弄完後，就按一個y鍵。

(以上為北南兄文章裡面內容)

不要急於連線,REBOOT -N

然後進入網路設定,設定ETH1固定IP，停止ETH1(我的是用他)

然後ADSL-START PING 你的DNS,如果可以,那麼,恭喜你!

如果不行，REBOOT -N

ADSL-START,這下沒問題啦，盡情享受吧！

其中部分內容可能不同,僅作參考,主要在連線後,能夠PING通DNS即可!