安裝，配置rp-pppoe撥號軟體，使adsl成功上網(轉)

安裝，配置rp-pppoe撥號軟體，使adsl成功上網(轉)[@more@]

----------------------------------------------------------

本文出處 ，如需轉載請註明！

點選免費下載大量的linux學習資料,軟體!

----------------------------------------------------------

1.下載rp-pppoe-3.5

2。解壓和安裝：

#tar zxvf rp-pppoe-3.5.tar.gz

進入解壓目錄執行

#sh ./go

3。配置

然後再來設定ADSL。這一處，我們要用命令。

#adsl-setup

Welcome to the Roaring Penguin ADSL client setup. First, I will run

some checks on your system to make sure the PPPoE client is installed

properly...

Looks good! Now, please enter some information:

USER NAME

>>> Enter your PPPoE user name (default XXX): 在這裡輸入ADSL的使用者名稱

INTERFACE

>>> Enter the Ethernet interface connected to the ADSL modem

For Solaris, this is likely to be something like /dev/hme0.

For Linux, it will be ethn, where 'n' is a number.

(default eth0):如果一張網路卡就設定寫上eth0

Do you want the link to come up on demand, or stay up continuously?

If you want it to come up on demand, enter the idle time in seconds

after which the link should be dropped. If you want the link to

stay up permanently, enter 'no' (two letters, lower-case.)

NOTE: Demand-activated links do not interact well with dynamic IP

addresses. You may have some problems with demand-activated links.

>>> Enter the demand value (default no):不用寫什麼

DNS

Please enter the IP address of your ISP's primary DNS server.

If your ISP claims that 'the server will provide DNS addresses',

enter 'server' (all lower-case) here.

If you just press enter, I will assume you know what you are

doing and not modify your DNS setup.

>>> Enter the DNS information here:在這裡寫上202.96.134.133

下一個DNS是202.96.168.68 //這裡根據個人不同可以修改

----------------------------------------------------------

本文出處 ，如需轉載請註明！

點選免費下載大量的linux學習資料,軟體!

----------------------------------------------------------

PASSWORD

>>> Please enter your PPPoE password:輸入密碼

>>> Please re-enter your PPPoE password:再輸入一次

FIREWALLING

Please choose the firewall rules to use. Note that these rules are

very basic. You are strongly encouraged to use a more sophisticated

firewall setup; however, these will provide basic security. If you

are running any servers on your machine, you must choose 'NONE' and

set up firewalling yourself. Otherwise, the firewall rules will deny

access to all standard servers like Web, e-mail, ftp, etc. If you

are using SSH, the rules will block outgoing SSH connections which

allocate a privileged source port.

The firewall choices are:

0 - NONE: This script will not set any firewall rules. You are responsible

for ensuring the security of your machine. You are STRONGLY

recommended to use some kind of firewall rules.

1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation

2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway

for a LAN

>>> Choose a type of firewall (0-2):這裡添寫為2

** Summary of what you entered **

Ethernet Interface: eth0

User name: XXX

Activate-on-demand: No

DNS: Do not adjust

Firewalling: MASQUERADE

>>> Accept these settings and adjust configuration files (y/n)?

弄完後，就按一個y鍵。

不要急於連線,REBOOT -N

然後進入網路設定,設定ETH1固定IP，停止ETH1(我的是用他)

然後ADSL-START

PING 你的DNS,如果可以,那麼,恭喜你!

如果不行，REBOOT -N

ADSL-START,這下沒問題啦，盡情享受吧！

----------------------------------------------------------

本文出處 ，如需轉載請註明