AIX5300-08 HACMP5.4.1 ORACLE10204 RAC 安裝(2)
網路配置
網路卡繫結(待驗證)
irdb1和irdb2兩臺主機均有四塊光纖網路卡,兩兩做成EtherChannel模式,並對EtherChannel的網路卡ent4和ent5配置IP地址.
將網路卡做成EtherChannel模式,使用命令:
#smitty etherchannel
àAdd An EtherChannel / Link Aggregation
à按F7選擇ent0和ent3做成通道ent4
à按F7選擇ent1和ent2做成通道ent5
配置好後的通道網路卡的IP表如下:
主機名稱 |
物理 網路卡 |
I/O位置 |
Ether Channel |
IP地址 |
irdb1 |
ent0 |
U7311.D11.YL01170-P1-C4-T1 |
ent4 |
IP:10.52.173.8 MASK:255.255.255.192 GATE:10.52.173.1 |
ent1 |
U7311.D11.YL01170-P1-C5-T1 | |||
ent2 |
U7311.D11.YL01170-P1-C2-T1 |
ent5 |
IP:172.16.10.1 MASK:255.255.255.0 | |
ent3 |
U7311.D11.YL01170-P1-C3-T1 | |||
irdb2 |
ent0 |
U7311.D11.YL00926-P1-C2-T1 |
ent4 |
IP:10.52.173.9 MASK:255.255.255.192 GATE:10.52.173.1 |
ent3 |
U7311.D11.YL00926-P1-C5-T1 | |||
ent1 |
U7311.D11.YL00926-P1-C3-T1 |
ent5 |
IP:172.16.10.2 MASK:255.255.255.0 | |
ent2 |
U7311.D11.YL00926-P1-C4-T1 |
修改主機名
# smit hostname
設定上面機器為P61A,下面機器為P61B
修改IP
# smit inet
-> Change / Show Characteristics of a Network Interface
-> 選擇一個網路介面,進行IP配置
P61A en1 10.10.1.61 255.255.255.0
en0 12.0.0.61 255.0.0.0
P61B en1 10.10.1.62 255.255.255.0
en0 12.0.0.62 255.0.0.0
檢視IP設定
# ifconfig -a
# netstat -in
修改/etc/hosts
127.0.0.1 loopback localhost
10.10.1.61 P61A
12.0.0.61 P61A_priv
10.10.1.101 P61A_vip
10.10.1.62 P61B
12.0.0.62 P61B_priv
10.10.1.102 P61B_vip
修改/etc/hosts.equiv
###### add by zhangqiaoc ######
+ root
+ oracle
###### end by zhangqiaoc ######
修改root oracle使用者HOME目錄下的.rhosts檔案
###### add by zhangqiaoc ######
+
###### end by zhangqiaoc ######
測試:
rsh P61A date
rsh P61B date
rcp tmp.txt P61A:/u01/app/oracle
rcp tmp.txt P61B:/u01/app/oracle
配置NTP
在server端:62
bash-3.00# vi /etc/ntp.conf
#broadcastclient
server 127.127.1.0
driftfile /etc/ntp.drift
tracefile /etc/ntp.trace
"/etc/ntp.conf" 42 lines, 1017 characters
bash-3.00# startsrc -s xntpd
0513-059 The xntpd Subsystem has been started. Subsystem PID is 274488.
bash-3.00# lssrc -ls xntpd
Program name: /usr/sbin/xntpd
Version: 3
Leap indicator: 11 (Leap indicator is insane.)
Sys peer: no peer, system is insane
Sys stratum: 16
Sys precision: -16
Debug/Tracing: DISABLED
Root distance: 0.000000
Root dispersion: 0.000000
Reference ID: no refid, system is insane
Reference time: no reftime, system is insane
Broadcast delay: 0.003906 (sec)
Auth delay: 0.000122 (sec)
System flags: pll monitor filegen
System uptime: 17 (sec)
Clock stability: 0.000000 (sec)
Clock frequency: 0.000000 (sec)
Peer: 127.127.1.0
flags: (configured)(refclock)
stratum: 3, version: 3
our mode: client, his mode: server
Subsystem Group PID Status
xntpd tcpip 274488 active
bash-3.00# lssrc -ls xntpd|grep "Sys peer"
Sys peer: no peer, system is insane
bash-3.00# lssrc -ls xntpd|grep "Sys peer"
Sys peer: 127.127.1.0
在client端: 61
bash-3.00# vi /etc/ntp.conf
server 10.10.1.62
driftfile /etc/ntp.drift
tracefile /etc/ntp.trace
"/etc/ntp.conf" 42 lines, 1023 characters
bash-3.00# startsrc -s xntpd
0513-059 The xntpd Subsystem has been started. Subsystem PID is 282860.
bash-3.00# lssrc -ls xntpd|grep "Sys peer"
Sys peer: P61B
來自 “ ITPUB部落格 ” ,連結:http://blog.itpub.net/8242091/viewspace-591198/,如需轉載,請註明出處,否則將追究法律責任。
相關文章
- 2節點RAC安裝
- Oracle 11G RAC叢集安裝(2)——安裝gridOracle
- rac靜默安裝
- linux7 靜默安裝 11GR2 RACLinux
- 安裝RAC 19C
- CentOS 7.6 安裝11.2.0.4 RACCentOS
- Windows 11.2.0.4 RAC安裝配置以及RAC新增節點Windows
- RAC安裝【AIX 7 + 11.2.0.4 + ASM】AIASM
- ORACLE11GR2 RAC解除安裝ASM例項步驟OracleASM
- oracle rac資料庫的安裝Oracle資料庫
- vgant 安裝oracle資料庫racOracle資料庫
- centos7 安裝ORACLE 11.2.0.4.0 RACCentOSOracle
- Solaris下Oracle RAC 11.2.0.4 安裝方法Oracle
- 基於Linux的oracle 12cR2 RAC 標準化安裝(一)LinuxOracle
- 基於Linux的oracle 12cR2 RAC 標準化安裝(二)LinuxOracle
- 基於Linux的oracle 12cR2 RAC 標準化安裝(三)LinuxOracle
- 基於Linux的oracle 12cR2 RAC 標準化安裝(四)LinuxOracle
- rhel7 安裝11g rac
- Oracle RAC叢集解除安裝步驟Oracle
- Linux下Oracle 11.2.0.1 RAC安裝筆記LinuxOracle筆記
- RAC之資料庫軟體安裝資料庫
- Oracle 11G RAC叢集安裝(3)——安裝OracleOracle
- 安裝rac時需要注意的問題
- redhat7.6安裝Oracle11G RACRedhatOracle
- AIX 5.3/6.1環境下安裝Oracle 10gR2 RAC常見報錯AIOracle 10g
- Oracle 19c RAC on Linux 7.6安裝手冊OracleLinux
- RAC安裝目錄許可權快速恢復
- 靜默安裝19C RAC的指令碼指令碼
- 網路原因導致rac安裝過程中節點2跑root.sh失敗
- Oracle 11G RAC叢集安裝(1)——安裝前的準備Oracle
- oracle 11g RAC 安裝前準備指令碼Oracle指令碼
- Oracle Linux 7.1 靜默安裝Oracle 18c RACOracleLinux
- 2,ELK安裝--ES安裝(單機版)
- 2-LinuxJava安裝LinuxJava
- Mycat2 安裝
- WSL2 安裝
- Sqoop2安裝OOP
- DB2 安裝DB2
- Oracle:Redhat 7 + Oracle RAC 11g 安裝 bug 總結OracleRedhat