簡介
前幾天搗鼓了一下Ubuntu，正是想用一下我舊電腦上的N卡，可以用GPU來跑程式碼，體驗一下多核的快樂。
還好我這破電腦也是支援Cuda的：
$ sudo lshw -C display
*-display
description: 3D controller
product: GK208M [GeForce GT 740M]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list rom
configuration: driver=nouveau latency=0
resources: irq:35 memory:f0000000-f0ffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:6000(size=128)安裝相關工具
首先安裝一下Cuda的開發工具，命令如下：
$ sudo apt install nvidia-cuda-toolkit檢視一下相關資訊：
$ nvcc --version
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2021 NVIDIA Corporation
Built on Thu_Nov_18_09:45:30_PST_2021
Cuda compilation tools, release 11.5, V11.5.119
Build cuda_11.5.r11.5/compiler.30672275_0透過Conda安裝相關的依賴包：
conda install numba & conda install cudatoolkit透過pip安裝也可以，一樣的。
測試與驅動安裝
簡單測試了一下，發覺報錯了：
$ /home/larry/anaconda3/bin/python /home/larry/code/pkslow-samples/python/src/main/python/cuda/test1.py
Traceback (most recent call last):
File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 246, in ensure_initialized
self.cuInit(0)
File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 319, in safe_cuda_api_call
self._check_ctypes_error(fname, retcode)
File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 387, in _check_ctypes_error
raise CudaAPIError(retcode, msg)
numba.cuda.cudadrv.driver.CudaAPIError: [100] Call to cuInit results in CUDA_ERROR_NO_DEVICE
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/home/larry/code/pkslow-samples/python/src/main/python/cuda/test1.py", line 15, in <module>
gpu_print[1, 2]()
File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/compiler.py", line 862, in __getitem__
return self.configure(*args)
File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/compiler.py", line 857, in configure
return _KernelConfiguration(self, griddim, blockdim, stream, sharedmem)
File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/compiler.py", line 718, in __init__
ctx = get_context()
File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/devices.py", line 220, in get_context
return _runtime.get_or_create_context(devnum)
File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/devices.py", line 138, in get_or_create_context
return self._get_or_create_context_uncached(devnum)
File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/devices.py", line 153, in _get_or_create_context_uncached
with driver.get_active_context() as ac:
File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 487, in __enter__
driver.cuCtxGetCurrent(byref(hctx))
File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 284, in __getattr__
self.ensure_initialized()
File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 250, in ensure_initialized
raise CudaSupportError(f"Error at driver init: {description}")
numba.cuda.cudadrv.error.CudaSupportError: Error at driver init: Call to cuInit results in CUDA_ERROR_NO_DEVICE (100)網上搜了一下，發現是驅動問題。透過Ubuntu自帶的工具安裝顯示卡驅動：
還是失敗：
$ nvidia-smi
NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.最後，透過命令列安裝驅動，成功解決這個問題：
$ sudo apt install nvidia-driver-470檢查後發現正常了：
$ nvidia-smi
Wed Dec 7 22:13:49 2022
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 470.161.03 Driver Version: 470.161.03 CUDA Version: 11.4 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
| | | MIG M. |
|===============================+======================+======================|
| 0 NVIDIA GeForce ... Off | 00000000:01:00.0 N/A | N/A |
| N/A 51C P8 N/A / N/A | 4MiB / 2004MiB | N/A Default |
| | | N/A |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: |
| GPU GI CI PID Type Process name GPU Memory |
| ID ID Usage |
|=============================================================================|
| No running processes found |
+-----------------------------------------------------------------------------+測試程式碼也可以跑了。
測試Python程式碼
列印ID
準備以下程式碼：
from numba import cuda
import os
def cpu_print():
print('cpu print')
@cuda.jit
def gpu_print():
dataIndex = cuda.threadIdx.x + cuda.blockIdx.x * cuda.blockDim.x
print('gpu print ', cuda.threadIdx.x, cuda.blockIdx.x, cuda.blockDim.x, dataIndex)
if __name__ == '__main__':
gpu_print[4, 4]()
cuda.synchronize()
cpu_print()這個程式碼主要有兩個函式，一個是用CPU執行，一個是用GPU執行，執行列印操作。關鍵在於@cuda.jit這個註解，讓程式碼在GPU上執行。執行結果如下：
$ /home/larry/anaconda3/bin/python /home/larry/code/pkslow-samples/python/src/main/python/cuda/print_test.py
gpu print 0 3 4 12
gpu print 1 3 4 13
gpu print 2 3 4 14
gpu print 3 3 4 15
gpu print 0 2 4 8
gpu print 1 2 4 9
gpu print 2 2 4 10
gpu print 3 2 4 11
gpu print 0 1 4 4
gpu print 1 1 4 5
gpu print 2 1 4 6
gpu print 3 1 4 7
gpu print 0 0 4 0
gpu print 1 0 4 1
gpu print 2 0 4 2
gpu print 3 0 4 3
cpu print可以看到GPU總共列印了16次，使用了不同的Thread來執行。這次每次列印的結果都可能不同，因為提交GPU是非同步執行的，無法確保哪個單元先執行。同時也需要呼叫同步函式cuda.synchronize()，確保GPU執行完再繼續往下跑。
檢視時間
我們透過這個函式來看GPU並行的力量：
from numba import jit, cuda
import numpy as np
# to measure exec time
from timeit import default_timer as timer
# normal function to run on cpu
def func(a):
for i in range(10000000):
a[i] += 1
# function optimized to run on gpu
@jit(target_backend='cuda')
def func2(a):
for i in range(10000000):
a[i] += 1
if __name__ == "__main__":
n = 10000000
a = np.ones(n, dtype=np.float64)
start = timer()
func(a)
print("without GPU:", timer() - start)
start = timer()
func2(a)
print("with GPU:", timer() - start)結果如下：
$ /home/larry/anaconda3/bin/python /home/larry/code/pkslow-samples/python/src/main/python/cuda/time_test.py
without GPU: 3.7136273959999926
with GPU: 0.4040513340000871可以看到使用CPU需要3.7秒，而GPU則只要0.4秒，還是能快不少的。當然這裡不是說GPU一定比CPU快，具體要看任務的型別。
程式碼
程式碼請看GitHub: https://github.com/LarryDpk/p...