【ubuntu】使用redis-cli操作redis查詢

代码诠释的世界發表於2024-12-05
UbuntuRedis

一、場景

命令列操作redis, 萬一沒有介面化軟體可用

二、文件

https://redis.io/docs/latest/develop/tools/cli/

三、安裝

sudo apt-get update
sudo apt-get install redis-tools

四、命令介紹

$ redis-cli --help
redis-cli 7.0.15

Usage: redis-cli [OPTIONS] [cmd [arg [arg ...]]]
  -h <hostname>      Server hostname (default: 127.0.0.1).
  -p <port>          Server port (default: 6379).
  -s <socket>        Server socket (overrides hostname and port).
  -a <password>      Password to use when connecting to the server.
                     You can also use the REDISCLI_AUTH environment
                     variable to pass this password more safely
                     (if both are used, this argument takes precedence).
  --user <username>  Used to send ACL style 'AUTH username pass'. Needs -a.
  --pass <password>  Alias of -a for consistency with the new --user option.
  --askpass          Force user to input password with mask from STDIN.
                     If this argument is used, '-a' and REDISCLI_AUTH
                     environment variable will be ignored.
  -u <uri>           Server URI.
  -r <repeat>        Execute specified command N times.
  -i <interval>      When -r is used, waits <interval> seconds per command.
                     It is possible to specify sub-second times like -i 0.1.
                     This interval is also used in --scan and --stat per cycle.
                     and in --bigkeys, --memkeys, and --hotkeys per 100 cycles.
  -n <db>            Database number.
  -2                 Start session in RESP2 protocol mode.
  -3                 Start session in RESP3 protocol mode.
  -x                 Read last argument from STDIN (see example below).
  -X                 Read <tag> argument from STDIN (see example below).
  -d <delimiter>     Delimiter between response bulks for raw formatting (default: \n).
  -D <delimiter>     Delimiter between responses for raw formatting (default: \n).
  -c                 Enable cluster mode (follow -ASK and -MOVED redirections).
  -e                 Return exit error code when command execution fails.
  --tls              Establish a secure TLS connection.
  --sni <host>       Server name indication for TLS.
  --cacert <file>    CA Certificate file to verify with.
  --cacertdir <dir>  Directory where trusted CA certificates are stored.
                     If neither cacert nor cacertdir are specified, the default
                     system-wide trusted root certs configuration will apply.
  --insecure         Allow insecure TLS connection by skipping cert validation.
  --cert <file>      Client certificate to authenticate with.
  --key <file>       Private key file to authenticate with.
  --tls-ciphers <list> Sets the list of preferred ciphers (TLSv1.2 and below)
                     in order of preference from highest to lowest separated by colon (":").
                     See the ciphers(1ssl) manpage for more information about the syntax of this string.
  --tls-ciphersuites <list> Sets the list of preferred ciphersuites (TLSv1.3)
                     in order of preference from highest to lowest separated by colon (":").
                     See the ciphers(1ssl) manpage for more information about the syntax of this string,
                     and specifically for TLSv1.3 ciphersuites.
  --raw              Use raw formatting for replies (default when STDOUT is
                     not a tty).
  --no-raw           Force formatted output even when STDOUT is not a tty.
  --quoted-input     Force input to be handled as quoted strings.
  --csv              Output in CSV format.
  --json             Output in JSON format (default RESP3, use -2 if you want to use with RESP2).
  --quoted-json      Same as --json, but produce ASCII-safe quoted strings, not Unicode.
  --show-pushes <yn> Whether to print RESP3 PUSH messages.  Enabled by default when
                     STDOUT is a tty but can be overridden with --show-pushes no.
  --stat             Print rolling stats about server: mem, clients, ...
  --latency          Enter a special mode continuously sampling latency.
                     If you use this mode in an interactive session it runs
                     forever displaying real-time stats. Otherwise if --raw or
                     --csv is specified, or if you redirect the output to a non
                     TTY, it samples the latency for 1 second (you can use
                     -i to change the interval), then produces a single output
                     and exits.
  --latency-history  Like --latency but tracking latency changes over time.
                     Default time interval is 15 sec. Change it using -i.
  --latency-dist     Shows latency as a spectrum, requires xterm 256 colors.
                     Default time interval is 1 sec. Change it using -i.
  --lru-test <keys>  Simulate a cache workload with an 80-20 distribution.
  --replica          Simulate a replica showing commands received from the master.
  --rdb <filename>   Transfer an RDB dump from remote server to local file.
                     Use filename of "-" to write to stdout.
 --functions-rdb <filename> Like --rdb but only get the functions (not the keys)
                     when getting the RDB dump file.
  --pipe             Transfer raw Redis protocol from stdin to server.
  --pipe-timeout <n> In --pipe mode, abort with error if after sending all data.
                     no reply is received within <n> seconds.
                     Default timeout: 30. Use 0 to wait forever.
  --bigkeys          Sample Redis keys looking for keys with many elements (complexity).
  --memkeys          Sample Redis keys looking for keys consuming a lot of memory.
  --memkeys-samples <n> Sample Redis keys looking for keys consuming a lot of memory.
                     And define number of key elements to sample
  --hotkeys          Sample Redis keys looking for hot keys.
                     only works when maxmemory-policy is *lfu.
  --scan             List all keys using the SCAN command.
  --pattern <pat>    Keys pattern when using the --scan, --bigkeys or --hotkeys
                     options (default: *).
  --quoted-pattern <pat> Same as --pattern, but the specified string can be
                         quoted, in order to pass an otherwise non binary-safe string.
  --intrinsic-latency <sec> Run a test to measure intrinsic system latency.
                     The test will run for the specified amount of seconds.
  --eval <file>      Send an EVAL command using the Lua script at <file>.
  --ldb              Used with --eval enable the Redis Lua debugger.
  --ldb-sync-mode    Like --ldb but uses the synchronous Lua debugger, in
                     this mode the server is blocked and script changes are
                     not rolled back from the server memory.
  --cluster <command> [args...] [opts...]
                     Cluster Manager command and arguments (see below).
  --verbose          Verbose mode.
  --no-auth-warning  Don't show warning message when using password on command
                     line interface.
  --help             Output this help and exit.
  --version          Output version and exit.

Cluster Manager Commands:
  Use --cluster help to list all available cluster manager commands.

Examples:
  cat /etc/passwd | redis-cli -x set mypasswd
  redis-cli -D "" --raw dump key > key.dump && redis-cli -X dump_tag restore key2 0 dump_tag replace < key.dump
  redis-cli -r 100 lpush mylist x
  redis-cli -r 100 -i 1 info | grep used_memory_human:
  redis-cli --quoted-input set '"null-\x00-separated"' value
  redis-cli --eval myscript.lua key1 key2 , arg1 arg2 arg3
  redis-cli --scan --pattern '*:12345*'

  (Note: when using --eval the comma separates KEYS[] from ARGV[] items)

When no command is given, redis-cli starts in interactive mode.
Type "help" in interactive mode for information on available commands
and settings.

五、常用操作

1、連線redis，並連線到指定的db

redis-cli -h 192.168.3.74 -p 6379 -n 5

認證引數根據實際redis設定使用

2、檢視所有的key

3、根據正則表達查詢，如包含部分字元

4、查詢某個key的值

其他操作可以根據需要自行了解

參考連結：

https://blog.csdn.net/sinat_20471177/article/details/132043998

相關文章