多執行緒伺服器壓力測試

難賦深情發表於2020-11-04

多執行緒伺服器壓力測試

1、shell指令碼

#! /bin/bash
#!/bin/bash

for((i=1;i<=1100;i=i+1))
do
            ./a & //後臺執行,即不依次執行
            echo "$i"   
            sleep 0.03
    done
//統計"O" 和 "F" 出現的個數,因為做壓力測試的時候連線成功我輸出
//OK,錯誤的時候我用的F
cat test.log | grep "F"|wc -l
cat test.log | grep "O"|wc -l

2、客戶端程式碼

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <errno.h>
#include <sys/types.h>          /* See NOTES */
#include <sys/socket.h>
 #include <arpa/inet.h>
#include <sys/socket.h>
       #include <netinet/in.h>
       #include <arpa/inet.h>
#define MSG "hello"
int main(){
        int                             cli_fd;
        struct sockaddr_in              cli_addr;
        socklen_t                       addrlen;
        int                             rv;
        char                            buf[1024];
        cli_fd = socket(AF_INET, SOCK_STREAM, 0);

        memset(&cli_addr,0,sizeof(cli_addr));
        cli_addr.sin_family = AF_INET;
        cli_addr.sin_port = htons(8899);
        inet_aton("59.110.42.24", &cli_addr.sin_addr);
        if(cli_fd < 0){
                printf("creat socket is faild[%s]\n",strerror(errno));
                printf("F");
                return -1;

        }
        //printf("create socket is successful:[%d]\n",cli_fd);

        if(connect(cli_fd, (struct sockaddr *)&cli_addr,sizeof(cli_addr))<0){
                printf("connect is faild[%s]\n",strerror(errno));
                printf("F");
                return 0;
        }
        //printf("connect is successful\n");
                /*
                rv = read(cli_fd, buf, sizeof(buf));
                if(rv <0){
                        printf("read is faild[%s]\n",strerror(errno));
                        continue;
                }
                printf("data is :[%s]",buf);
                */


                if(write(cli_fd, &MSG, sizeof(MSG))<0){
                        printf("write is faild[%s]\n",strerror(errno));
                        close(cli_fd);
        //              printf("失敗");
                        exit(-1);
                }
        //      printf("write is successful,\n");
                memset(buf,0,sizeof(buf));
                rv = read(cli_fd, buf, sizeof(buf));
                if(rv<0){
                        printf("read is failed:[%s]\n",strerror(errno));
                        close(cli_fd);
        //      printf("失敗");
                        exit(-1);
                }
        //      printf("read is successful,data is [%s]\n",buf);
                printf("OK");
                close(cli_fd);
                exit(0);
}          

3、多執行緒伺服器程式碼

#include <stdio.h>
#include <errno.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#include <stdlib.h>
#include <getopt.h>
#include <pthread.h>
#include <ctype.h>
typedef void *(THREAD_BODY) (void *thread_arg);
void *thread_worker(void *ctx);
int  thread_start (pthread_t * thread_id, THREAD_BODY * thread_workbody, void *thread_arg);

void print_usage(char *progname)
{
        printf("%s usage: \n", progname);
        printf("-p(--port): sepcify server listen port.\n");
        printf("-h(--Help): print this help information.\n");
        return ;
}

int main(int argc, char **argv)
{
        int                  sockfd = -1;
        int                  rv = -1;
        struct sockaddr_in   servaddr;
        struct sockaddr_in   cliaddr;
        socklen_t            len= sizeof(cliaddr);
        int                  port = 8899;
        int                  clifd;
        int                  ch;
        int                  on = 1;
        pthread_t            tid;
        struct option        opts[] = {};
        
        sockfd=socket(AF_INET, SOCK_STREAM, 0);
        if(sockfd < 0)
        {
                printf("Create socket failure: %s\n", strerror(errno));
                return -1;
        }
        printf("Create socket[%d] successfully!\n", sockfd);
        setsockopt(sockfd, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on));
        memset(&servaddr, 0, sizeof(servaddr));
        servaddr.sin_family=AF_INET;
        servaddr.sin_port = htons(port);
        servaddr.sin_addr.s_addr = htonl(INADDR_ANY); /* listen all the IP address on this host */
        //inet_aton("192.168.0.16", &servaddr.sin_addr); /* Only listen specify IP address on this host */
        rv=bind(sockfd, (struct sockaddr *)&servaddr, sizeof(servaddr));
        if(rv < 0)
        {
                printf("Socket[%d] bind on port[%d] failure: %s\n", sockfd, port, strerror(errno));
                return -2;
        }
        listen(sockfd, 13);
        printf("Start to listen on port [%d]\n", port);
        while(1)
        {
                printf("Start accept new client incoming...\n");
                clifd=accept(sockfd, (struct sockaddr *)&cliaddr, &len);
                if(clifd < 0)
                {
                        printf("Accept new client failure: %s\n", strerror(errno));
                        continue;
                }
                printf("Accept new client[%s:%d] successfully\n", inet_ntoa(cliaddr.sin_addr),ntohs(cliaddr.sin_port));
                /* 
!!!! Think about here: why pass clifd but not &clifd ?  !!!
 */
                thread_start(&tid, thread_worker,(void *) clifd);
        }
        close(sockfd);
        return 0;
}
int thread_start(pthread_t * thread_id, THREAD_BODY * thread_workbody, void *thread_arg)
{
        int                 rv = -1;
        pthread_attr_t      thread_attr;
        if( pthread_attr_init(&thread_attr) )
        {
                printf("pthread_attr_init() failure: %s\n", strerror(errno));
                goto CleanUp;
        }
        if( pthread_attr_setstacksize(&thread_attr, 120*1024) )
        {
                printf("pthread_attr_setstacksize() failure: %s\n", strerror(errno));
                goto CleanUp;
        }
        if( pthread_attr_setdetachstate(&thread_attr, PTHREAD_CREATE_DETACHED) )
        {
                printf("pthread_attr_setdetachstate() failure: %s\n", strerror(errno));
                goto CleanUp;
        }
        /* Create the thread */
        if( pthread_create(thread_id, &thread_attr, thread_workbody, thread_arg) )
        {
                printf("Create thread failure: %s\n", strerror(errno));
                goto CleanUp;
        }
        rv = 0;
CleanUp:
        /* Destroy the  attributes  of  thread */
        pthread_attr_destroy(&thread_attr);
        return rv;
}


void *thread_worker(void * ctx)
{
        int                  clifd;
        int                  rv;
        char                 buf[1024];
        int                  i;
        if( !ctx )
        {
                printf("Invalid input arguments in %s()\n", __FUNCTION__);
                pthread_exit(NULL);
        }
	clifd = (int)ctx;
        printf("Child thread start to commuicate with socket client...\n");
        while(1)
        {
                memset(buf, 0, sizeof(buf));
                rv=read(clifd, buf, sizeof(buf));
                if( rv < 0)
                {
                        printf("Read data from client sockfd[%d] failure: %s and thread will exit\n", clifd,
strerror(errno));
                        close(clifd);
                        pthread_exit(NULL);
                }
                else if( rv == 0)
                {
                        printf("Socket[%d] get disconnected and thread will exit.\n", clifd);
                        close(clifd);
                        pthread_exit(NULL);
                }
                else
                {
                        printf("Read %d bytes data from Server: %s\n", rv, buf);
                	close(clifd);
			pthread_exit(NULL);
		}
                /* convert letter from lowercase to uppercase */
                for(i=0; i<rv; i++)
                {
                        buf[i]=toupper(buf[i]);
                }
                rv=write(clifd, buf, rv);
                if(rv < 0)
                {
                        printf("Write to client by sockfd[%d] failure: %s and thread will exit\n", clifd,
strerror(errno));
                        close(clifd);
                        pthread_exit(NULL);
                }
        }
}

壓力測試比多程式好多了。可以看到執行截圖,執行了1100次客戶端,成功的多大1028
在這裡插入圖片描述

相關文章