Sublime Text 2 設定檔案詳解

　　Sublime Text 2是那種讓人會一眼就愛上的編輯器，不僅GUI讓人眼前一亮，功能更是沒的說，擴充性目前來說也完全夠用了，網上介紹軟體的文章和推薦外掛的文章也不少，而且很不錯，大家可以去找找自己需要的。而且 Linux 支援也做的非常好。 想駕馭好這軟體不弄清楚配置檔案是不行的，本文把配置檔案的每條配置資訊都加上了中文註釋，現在貼出來和大家共享，裡面有解釋不清楚的也歡迎大傢伙來互相討論。

　　Preferences.sublime-settings檔案：

// While you can edit this file, it's best to put your changes in
 // "User/Preferences.sublime-settings", which overrides the settings in here.
 //
 // Settings may also be placed in file type specific options files, for
 // example, in Packages/Python/Python.sublime-settings for python files.
 {
 // Sets the colors used within the text area
 // 主題檔案的路徑
 "color_scheme": "Packages/Color Scheme - Default/Monokai.tmTheme",
 
 // Note that the font_face and font_size are overriden in the platform
 // specific settings file, for example, "Preferences (Linux).sublime-settings".
 // Because of this, setting them here will have no effect: you must set them
 // in your User File Preferences.
 // 設定字型和大小，必須在Settings-User裡重寫，這裡設定沒有任何效果
 "font_face": "Consolas",
 "font_size": 12,
 
 // Valid options are "no_bold", "no_italic", "no_antialias", "gray_antialias",
 // "subpixel_antialias" and "no_round" (OS X only)
 // 字型選項：no_bold不顯示粗體字，no_italic不顯示斜體字，no_antialias和no_antialias關閉反鋸齒
 // subpixel_antialias和no_round是OS X系統獨有的
 "font_options": [],
 
 // Characters that are considered to separate words
 // 在文字上雙擊會全選當前的內容，如果裡面出現以下字元，就會被截斷
 "word_separators": "./\\()\"'-:,.;<>~!@#$%^&*|+=[]{}`~?",
 
 // Set to false to prevent line numbers being drawn in the gutter
 // 是否顯示行號
 "line_numbers": true,
 
 // Set to false to hide the gutter altogether
 // 是否顯示行號邊欄
 "gutter": true,
 
 // Spacing between the gutter and the text
 // 行號邊欄和文字的間距
 "margin": 4,
 
 // Fold buttons are the triangles shown in the gutter to fold regions of text
 // 是否顯示程式碼摺疊按鈕
 "fold_buttons": true,
 
 // Hides the fold buttons unless the mouse is over the gutter
 // 不管滑鼠在不在行號邊欄，程式碼摺疊按鈕一直顯示
 "fade_fold_buttons": true,
 
 // Columns in which to display vertical rulers
 //列顯示垂直標尺，在中括號裡填入數字，寬度按字元計算
 "rulers": [],
 
 // Set to true to turn spell checking on by default
 // 是否開啟拼寫檢查
 "spell_check": false,
 
 // The number of spaces a tab is considered equal to
 // Tab鍵製表符寬度
 "tab_size": 4,
 
 // Set to true to insert spaces when tab is pressed
 // 設為true時，縮排和遇到Tab鍵時使用空格替代
 "translate_tabs_to_spaces": false,
 
 // If translate_tabs_to_spaces is true, use_tab_stops will make tab and
 // backspace insert/delete up to the next tabstop
 // translate_tabs_to_spaces設定為true，Tab和Backspace的刪除/插入作用於製表符寬度
 // 否則作用於單個空格
 "use_tab_stops": true,
 
 // Set to false to disable detection of tabs vs. spaces on load
 // false時禁止在載入的時候檢測製表符和空格
 "detect_indentation": true,
 
 // Calculates indentation automatically when pressing enter
 // 按回車時，自動與製表位對齊
 "auto_indent": true,
 
 // Makes auto indent a little smarter, e.g., by indenting the next line
 // after an if statement in C. Requires auto_indent to be enabled.
 //針對C語言的
 "smart_indent": false,
 
 // Adds whitespace up to the first open bracket when indenting. Requires
 // auto_indent to be enabled.
 // 需要啟用auto_indent，第一次開啟括號縮排時插入空格？（沒測試出來效果...）
 "indent_to_bracket": true,
 
 // Trims white space added by auto_indent when moving the caret off the
 // line.
 // 顯示對齊的白線是否根據回車、tab等操作自動填補
 "trim_automatic_white_space": true,
 
 // Disables horizontal scrolling if enabled.
 // May be set to true, false, or "auto", where it will be disabled for
 // source code, and otherwise enabled.
 // 是否自動換行，如果選auto，需要加雙引號
 "word_wrap": false,
 
 // Set to a value other than 0 to force wrapping at that column rather than the
 // window width
 // 設定視窗內文字區域的寬度
 "wrap_width": 0,
 
 // Set to false to prevent word wrapped lines from being indented to the same
 // level
 // 防止被縮排到同一級的字換行
 "indent_subsequent_lines": true,
 
 // Draws text centered in the window rather than left aligned
 // 如果沒有定義過，則檔案居中顯示（比如新建的檔案）
 "draw_centered": false,
 
 // Controls auto pairing of quotes, brackets etc
 // 自動匹配引號，括號等
 "auto_match_enabled": true,
 
 // Word list to use for spell checking
 // 拼寫檢查的單詞列表路徑
 "dictionary": "Packages/Language - English/en_US.dic",
 
 // Set to true to draw a border around the visible rectangle on the minimap.
 // The color of the border will be determined by the "minimapBorder" key in
 // the color scheme
 // 程式碼地圖的可視區域部分是否加上邊框，邊框的顏色可在配色方案上加入minimapBorder鍵
 "draw_minimap_border": false,
 
 // If enabled, will highlight any line with a caret
 // 突出顯示當前游標所在的行
 "highlight_line": false,
 
 // Valid values are "smooth", "phase", "blink", "wide" and "solid".
 // 設定游標閃動方式
 "caret_style": "smooth",
 
 // Set to false to disable underlining the brackets surrounding the caret
 // 是否特殊顯示當前游標所在的括號、程式碼頭尾閉合標記
 "match_brackets": true,
 
 // Set to false if you'd rather only highlight the brackets when the caret is
 // next to one
 // 設為false時，只有游標在括號或頭尾閉合標記的兩端時，match_brackets才生效
 "match_brackets_content": true,
 
 // Set to false to not highlight square brackets. This only takes effect if
 // match_brackets is true
 // 是否突出顯示圓括號，match_brackets為true生效
 "match_brackets_square": false,
 
 // Set to false to not highlight curly brackets. This only takes effect if
 // match_brackets is true
 // 是否突出顯示大括號，match_brackets為true生效
 "match_brackets_braces": false,
 
 // Set to false to not highlight angle brackets. This only takes effect if
 // match_brackets is true
 // 是否突出顯示尖括號，match_brackets為true生效
 "match_brackets_angle": false,
 
 // Enable visualization of the matching tag in HTML and XML
 // html和xml下突出顯示游標所在標籤的兩端，影響HTML、XML、CSS等
 "match_tags": true,
 
 // Highlights other occurrences of the currently selected text
 // 全文突出顯示和當前選中字元相同的字元
 "match_selection": true,
 
 // Additional spacing at the top of each line, in pixels
 // 設定每一行到頂部，以畫素為單位的間距，效果相當於行距
 "line_padding_top": 1,
 
 // Additional spacing at the bottom of each line, in pixels
 // 設定每一行到底部，以畫素為單位的間距，效果相當於行距
 "line_padding_bottom": 1,
 
 // Set to false to disable scrolling past the end of the buffer.
 // On OS X, this value is overridden in the platform specific settings, so
 // you'll need to place this line in your user settings to override it.
 // 設定為false時，滾動到文字的最下方時，沒有緩衝區
 "scroll_past_end": true,
 
 // This controls what happens when pressing up or down when on the first
 // or last line.
 // On OS X, this value is overridden in the platform specific settings, so
 // you'll need to place this line in your user settings to override it.
 // 控制向上或向下到第一行或最後一行時發生什麼（沒明白也沒試出來）
 "move_to_limit_on_up_down": false,
 
 // Set to "none" to turn off drawing white space, "selection" to draw only the
 // white space within the selection, and "all" to draw all white space
 // 按space或tab時，實際會產生白色的點（一個空格一個點）或白色的橫線（tab_size設定的製表符的寬度），選中狀態下才能看到
 // 設定為none時，什麼情況下都不顯示這些點和線
 // 設定為selection時，只顯示選中狀態下的點和線
 // 設定為all時，則一直顯示
 "draw_white_space": "selection",
 
 // Set to false to turn off the indentation guides.
 // The color and width of the indent guides may be customized by editing
 // the corresponding .tmTheme file, and specifying the colors "guide",
 // "activeGuide" and "stackGuide"
 // 製表位的對齊白線是否顯示，顏色可在主題檔案裡設定（guide，activeGuide，stackGuide）
 "draw_indent_guides": true,
 
 // Controls how the indent guides are drawn, valid options are
 // "draw_normal" and "draw_active". draw_active will draw the indent
 // guides containing the caret in a different color.
 // 製表位的對齊白線，draw_normal為一直顯示，draw_active為只顯示當前游標所在的程式碼控制域
 "indent_guide_options": ["draw_normal"],
 
 // Set to true to removing trailing white space on save
 // 為true時，儲存檔案時會刪除每行結束後多餘的空格
 "trim_trailing_white_space_on_save": false,
 
 // Set to true to ensure the last line of the file ends in a newline
 // character when saving
 // 為true時，儲存檔案時游標會在檔案的最後向下換一行
 "ensure_newline_at_eof_on_save": false,
 
 // Set to true to automatically save files when switching to a different file
 // or application
 // 切換到其它檔案標籤或點選其它非本軟體區域，檔案自動儲存
 "save_on_focus_lost": false,
 
 // The encoding to use when the encoding can't be determined automatically.
 // ASCII, UTF-8 and UTF-16 encodings will be automatically detected.
 // 編碼時不能自動檢測編碼時，將自動檢測ASCII, UTF-8 和 UTF-16
 "fallback_encoding": "Western (Windows 1252)",
 
 // Encoding used when saving new files, and files opened with an undefined
 // encoding (e.g., plain ascii files). If a file is opened with a specific
 // encoding (either detected or given explicitly), this setting will be
 // ignored, and the file will be saved with the encoding it was opened
 // with.
 // 預設編碼格式
 "default_encoding": "UTF-8",
 
 // Files containing null bytes are opened as hexadecimal by default
 // 包含空位元組的檔案被開啟預設為十六進位制
 "enable_hexadecimal_encoding": true,
 
 // Determines what character(s) are used to terminate each line in new files.
 // Valid values are 'system' (whatever the OS uses), 'windows' (CRLF) and
 // 'unix' (LF only).
 // 每一行結束的時候用什麼字元做終止符
 "default_line_ending": "system",
 
 // When enabled, pressing tab will insert the best matching completion.
 // When disabled, tab will only trigger snippets or insert a tab.
 // Shift+tab can be used to insert an explicit tab when tab_completion is
 // enabled.
 // 設定為enabled時，在一個字串間按Tab將插入一個製表符
 // 設定為true時，按Tab會根據前後環境進行程式碼自動匹配填補
 "tab_completion": true,
 
 // Enable auto complete to be triggered automatically when typing.
 // 程式碼提示
 "auto_complete": true,
 
 // The maximum file size where auto complete will be automatically triggered.
 // 程式碼提示的大小限制
 "auto_complete_size_limit": 4194304,
 
 // The delay, in ms, before the auto complete window is shown after typing
 // 程式碼提示延遲顯示
 "auto_complete_delay": 50,
 
 // Controls what scopes auto complete will be triggered in
 // 程式碼提示的控制範圍
 "auto_complete_selector": "source - comment",
 
 // Additional situations to trigger auto complete
 // 觸發程式碼提示的其他情況
 "auto_complete_triggers": [ {"selector": "text.html", "characters": "<"} ],
 
 // By default, auto complete will commit the current completion on enter.
 // This setting can be used to make it complete on tab instead.
 // Completing on tab is generally a superior option, as it removes
 // ambiguity between committing the completion and inserting a newline.
 // 設為false時，選擇提示的程式碼按回車或點選可以輸出出來，但選擇true時不會輸出而是直接換行
 "auto_complete_commit_on_tab": false,
 
 // Controls if auto complete is shown when snippet fields are active.
 // Only relevant if auto_complete_commit_on_tab is true.
 // auto_complete_commit_on_tab必須為true，控制程式碼提示的活躍度（沒明白...）
 "auto_complete_with_fields": false,
 
 // By default, shift+tab will only unindent if the selection spans
 // multiple lines. When pressing shift+tab at other times, it'll insert a
 // tab character - this allows tabs to be inserted when tab_completion is
 // enabled. Set this to true to make shift+tab always unindent, instead of
 // inserting tabs.
 // 設定為false，使用Shift + tab總是插入製表符
 "shift_tab_unindent": true,
 
 // If true, the selected text will be copied into the find panel when it's
 // shown.
 // On OS X, this value is overridden in the platform specific settings, so
 // you'll need to place this line in your user settings to override it.
 // 選中的文字按Ctrl + f時，自動複製到查詢皮膚的文字框裡
 "find_selected_text": true,
 
 //
 // User Interface Settings
 //
 
 // The theme controls the look of Sublime Text's UI (buttons, tabs, scroll bars, etc)
 // Data\Packages\Theme - Default\Default.sublime-theme控制軟體的主題
 "theme": "Default.sublime-theme",
 
 // Set to 0 to disable smooth scrolling. Set to a value between 0 and 1 to
 // scroll slower, or set to larger than 1 to scroll faster
 // 滾動的速度
 "scroll_speed": 1.0,
 
 // Controls side bar animation when expanding or collapsing folders
 // 左邊邊欄資料夾動畫
 "tree_animation_enabled": true,
 // 標籤頁的關閉按鈕
 "show_tab_close_buttons": true,
 
 // OS X 10.7 only: Set to true to disable Lion style full screen support.
 // Sublime Text must be restarted for this to take effect.
 // 針對OS X
 "use_simple_full_screen": false,
 
 // Valid values are "system", "enabled" and "disabled"
 // 水平垂直滾動條：system和disabled為預設顯示方式，enabled為自動隱藏顯示
 "overlay_scroll_bars": "system",
 
 //
 // Application Behavior Settings
 //
 
 // Exiting the application with hot_exit enabled will cause it to close
 // immediately without prompting. Unsaved modifications and open files will
 // be preserved and restored when next starting.
 //
 // Closing a window with an associated project will also close the window
 // without prompting, preserving unsaved changes in the workspace file
 // alongside the project.
 // 熱推出功能！退出時不會提示是否儲存檔案，而是直接退出
 // 下次開啟軟體時，檔案保持退出前的狀態，沒來得及儲存的內容都在，但並沒有真實的寫在原檔案裡
 "hot_exit": true,
 
 // remember_open_files makes the application start up with the last set of
 // open files. Changing this to false will have no effect if hot_exit is
 // true
 // 軟體使用最後的設定開啟檔案，hot_exit為true時沒有效果
 "remember_open_files": true,
 
 // OS X only: When files are opened from finder, or by dragging onto the
 // dock icon, this controls if a new window is created or not.
 // 針對OS X
 "open_files_in_new_window": true,
 
 // Set to true to close windows as soon as the last file is closed, unless
 // there's a folder open within the window. This is always enabled on OS X,
 // changing it here won't modify the behavior.
 // 針對OS X
 "close_windows_when_empty": true,
 // 哪些檔案會被顯示到邊欄上
 // folder_exclude_patterns and file_exclude_patterns control which files
 // are listed in folders on the side bar. These can also be set on a per-
 // project basis.
 "folder_exclude_patterns": [".svn", ".git", ".hg", "CVS"],
 "file_exclude_patterns": ["*.pyc", "*.pyo", "*.exe", "*.dll", "*.obj","*.o", "*.a", "*.lib", "*.so", "*.dylib", "*.ncb", "*.sdf", "*.suo", "*.pdb", "*.idb", ".DS_Store", "*.class", "*.psd", "*.db"],
 // These files will still show up in the side bar, but won't be included in
 // Goto Anything or Find in Files
 "binary_file_patterns": ["*.jpg", "*.jpeg", "*.png", "*.gif", "*.ttf", "*.tga", "*.dds", "*.ico", "*.eot", "*.pdf", "*.swf", "*.jar", "*.zip"],
 
 // List any packages to ignore here. When removing entries from this list,
 // a restart may be required if the package contains plugins.
 // 刪除你想要忽略的外掛，需要重啟
 "ignored_packages": ["Vintage"]
 }