linux中磁碟的掛載
檢視現在有哪些未掛載的磁碟
[root@slave2 ~]# fdisk -l
Disk /dev/sda: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00059039
Device Boot Start End Blocks Id System
/dev/sda1 * 1 39 307200 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 39 2358 18631680 83 Linux
/dev/sda3 2358 2611 2031616 82 Linux swap / Solaris
Disk /dev/sdb: 32.2 GB, 32212254720 bytes
255 heads, 63 sectors/track, 3916 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
分割槽磁碟 先輸入m檢視幫助,在輸出 n 建立一個新分割槽 在輸入 p 在輸入1 最後輸入 w寫入命令
[root@slave2 ~]# fdisk /dev/sdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x92b57732.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won’t be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: DOS-compatible mode is deprecated. It’s strongly recommended to
switch off the mode (command ‘c’) and change display units to
sectors (command ‘u’).
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition’s system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-3916, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-3916, default 3916):
Using default value 3916
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
檢視是否分割槽成功
[root@slave2 ~]# fdisk -l
Disk /dev/sda: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00059039
Device Boot Start End Blocks Id System
/dev/sda1 * 1 39 307200 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 39 2358 18631680 83 Linux
/dev/sda3 2358 2611 2031616 82 Linux swap / Solaris
Disk /dev/sdb: 32.2 GB, 32212254720 bytes
255 heads, 63 sectors/track, 3916 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x92b57732
Device Boot Start End Blocks Id System
/dev/sdb1 1 3916 31455238+ 83 Linux
格式化磁碟 格式化的格式是 ext3的
[root@slave2 ~]# mkfs -t ext3 /dev/sdb1
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
1966080 inodes, 7863809 blocks
393190 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
240 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
Writing inode tables: done
Creating journal (32768 blocks):
done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 22 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
掛載到那個目錄下面
[root@slave2 ~]# mount /dev/sdb1 /opt/
檢視是否掛載成功
[root@slave2 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 18G 7.7G 9.0G 47% /
tmpfs 935M 0 935M 0% /dev/shm
/dev/sda1 291M 39M 238M 14% /boot
/dev/sdb1 30G 173M 28G 1% /opt
相關文章
- Linux 掛載磁碟Linux
- Linux磁碟掛載 轉Linux
- Linux下磁碟掛載Linux
- LInux掛載windows共享磁碟LinuxWindows
- Linux掛載ISCSI TARGET磁碟Linux
- Linux 磁碟分割槽和掛載Linux
- linux 新增磁碟 分割槽掛載Linux
- linux 磁碟分割槽掛載-fdiskLinux
- Linux(centos)手動掛載系統磁碟和自動掛載系統磁碟教程LinuxCentOS
- 新增磁碟並掛載磁碟
- linux磁碟掛載與解除安裝Linux
- ubuntu磁碟掛載Ubuntu
- Centos 磁碟掛載CentOS
- Linux LVM磁碟管理與FS掛載LinuxLVM
- Linux磁碟分割槽及自動掛載Linux
- Linux不重啟識別新掛載磁碟Linux
- Linux 磁碟掛載和swap空間管理Linux
- liunx磁碟掛載操作
- 磁碟掛載mount,umount
- 開機掛載磁碟
- ecs centos 掛載磁碟CentOS
- centos上掛載新的磁碟CentOS
- linux下玩轉磁碟管理與掛載硬碟Linux硬碟
- CentOS7.X磁碟掛載及取消掛載CentOS
- linux fdisk 命令 磁碟劃分新的分割槽及掛載Linux
- Rocky9 掛載磁碟
- Linux磁碟分割槽、掛載、檢視檔案大小Linux
- 磁碟分割槽以及Linux目錄掛載詳解Linux
- Linux精講——磁碟掛載mount/解除安裝umountLinux
- 【Linux】Linux檔案系統管理1 磁碟分割槽、格式化、掛載-卷標掛載Linux
- 【Linux】Linux檔案系統管理2 磁碟分割槽、格式化、掛載-UUID掛載LinuxUI
- 掛載已有資料的LVM磁碟LVM
- centos7.x掛載磁碟CentOS
- 磁碟組不能自動掛載
- CentOS7 磁碟掛載操作CentOS
- Ubuntu-22.04 掛載磁碟Ubuntu
- 雲伺服器磁碟掛載伺服器
- 保姆教程系列:小白也能看懂的 Linux 掛載磁碟實操Linux