系統啟動後找不到網路卡資訊的資料對比

系統：
Red Hat Enterprise Linux AS release 4 (Nahant Update 3)
Kernel 2.6.9-34.ELsmp on an i686

系統啟動後找不到網路卡資訊（雙網路卡）

執行ifconfig顯示的資訊：
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:204 errors:0 dropped:0 overruns:0 frame:0
TX packets:204 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:15308 (14.9 KiB) TX bytes:15308 (14.9 KiB)

執行lsmod顯示的資訊：
Module Size Used by
button 10449 0
battery 12869 0
ac 8773 0
ext3 118729 2
jbd 59481 1 ext3
aic7xxx 146425 0
megaraid_mbox 37073 3
megaraid_mm 17905 1 megaraid_mbox
sd_mod 20545 4
scsi_mod 116941 3 aic7xxx,megaraid_mbox,sd_mod

執行dmesg後顯示的資訊：
Linux version 2.6.9-34.ELsmp () (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 SMP Fri Feb 24 16:54:53 EST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)
BIOS-e820: 000000007ffc0000 - 000000007ffcfc00 (ACPI data)
BIOS-e820: 000000007ffcfc00 - 000000007ffff000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000fec90000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 524224
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 294848 pages, LIFO batch:16
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 DELL ) @ 0x000fd6c0
ACPI: RSDT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x000fd6d4
ACPI: FADT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x000fd708
ACPI: MADT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x000fd77c
ACPI: SPCR (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x000fd824
ACPI: HPET (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x000fd874
ACPI: DSDT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
Enabling APIC mode: Flat. Using 0 I/O APICs
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[32])
IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 32-55
ACPI: IOAPIC (id[0x04] address[0xfec83000] gsi_base[64])
IOAPIC[2]: apic_id 4, version 32, address 0xfec83000, GSI 64-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0xffffffff base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
Initializing CPU#0
CPU 0 irqstacks, hard=c03ea000 soft=c03ca000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2073452k/2096896k available (1868k kernel code, 22488k reserved, 755k data, 180k init, 1179392k highmem)
Using HPET for base-timer
Using HPET for gettimeofday
Detected 2793.401 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 5589.40 BogoMIPS (lpj=2794700)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU0: Initial APIC ID: 0, Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
per-CPU timeslice cutoff: 2925.13 usecs.
task migration cache decay timeout: 3 msecs.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c03eb000 soft=c03cb000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5586.08 BogoMIPS (lpj=2793041)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU1: Initial APIC ID: 1, Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
Total of 2 processors activated (11175.48 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
zapping low mappings.
checking if image is initramfs... it is
Freeing initrd memory: 540k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfbf7e, last bus=9
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PALO._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PALO.DOBA._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PALO.DOBB._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PBLO._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.VPR0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PBHI._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PBHI.PXB1._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PBHI.PXB2._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PICH._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI - using IRQ 0
ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 46 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:03:0b.0[A] -> GSI 37 (level, low) -> IRQ 209
ACPI: PCI interrupt 0000:03:0b.1[B] -> GSI 38 (level, low) -> IRQ 217
ACPI: PCI interrupt 0000:06:07.0[A] -> GSI 64 (level, low) -> IRQ 225
ACPI: PCI interrupt 0000:07:08.0[A] -> GSI 65 (level, low) -> IRQ 233
ACPI: PCI interrupt 0000:09:0d.0[A] -> GSI 18 (level, low) -> IRQ 185
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1164812590.691:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 63EFDF11AD6BAA3
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Intel E7520/7320/7525 detected.<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI - using IRQ 0
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: TEAC CD-ROM CD-224E, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 43690)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S4 S5)
ACPI wakeup devices:
PCI0 PALO PBLO VPR0 PBHI
Freeing unused kernel memory: 180k freed
SCSI subsystem initialized
megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
megaraid: 2.20.4.6 (Release Date: Mon Mar 07 12:27:22 EST 2005)
megaraid: probe new device 0x1028:0x0013:0x1028:0x016d: bus 2:slot 14:func 0
ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 46 (level, low) -> IRQ 201
megaraid: fw version:[513O] bios version:[H418]
scsi0 : LSI Logic MegaRAID driver
scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
Vendor: PE/PV Model: 1x6 SCSI BP Rev: 1.0
Type: Processor ANSI SCSI revision: 02
scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices
scsi[0]: scanning scsi channel 2 [virtual] for logical drives
Vendor: MegaRAID Model: LD 0 RAID1 34G Rev: 513O
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 71024640 512-byte hdwr sectors (36365 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
SCSI device sda: 71024640 512-byte hdwr sectors (36365 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
sda: sda1 sda2 sda3 sda4 < sda5 >
Attached scsi disk sda at scsi0, channel 2, id 0, lun 0
ACPI: PCI interrupt 0000:03:0b.0[A] -> GSI 37 (level, low) -> IRQ 209
ACPI: PCI interrupt 0000:03:0b.1[B] -> GSI 38 (level, low) -> IRQ 217
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36

aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

scsi1:A:0:0: DV failed to configure device. Please file a bug report against this driver.
(scsi1:A:0): 160.000MB/s transfers (80.000MHz DT, offset 31, 16bit)
Vendor: SR 3012U Model: 3 Rev: 0001
Type: Direct-Access ANSI SCSI revision: 03
scsi1:A:0:0: Tagged Queuing enabled. Depth 4
SCSI device sdb: 20971520 512-byte hdwr sectors (10737 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 20971520 512-byte hdwr sectors (10737 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Vendor: SR 3012U Model: 3 Rev: 0001
Type: Direct-Access ANSI SCSI revision: 03
scsi1:A:0:1: Tagged Queuing enabled. Depth 4
SCSI device sdc: 192413696 512-byte hdwr sectors (98516 MB)
SCSI device sdc: drive cache: write back
SCSI device sdc: 192413696 512-byte hdwr sectors (98516 MB)
SCSI device sdc: drive cache: write back
sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 >
Attached scsi disk sdc at scsi1, channel 0, id 0, lun 1
scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36

aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs

(scsi2:A:5): 80.000MB/s transfers (40.000MHz, offset 32, 16bit)
Vendor: SEAGATE Model: DAT DAT72-052 Rev: A060
Type: Sequential-Access ANSI SCSI revision: 03
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ACPI: Power Button (FF) [PWRF]
EXT3 FS on sda5, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2096472k swap on /dev/sda3. Priority:-1 extents:1

估計原因的系統核心混亂，執行depmod後系統重新啟動後重新找到網路卡，此時重新配置網路卡資訊，系統啟動後正常，
此時的系統資訊為：
lsmod資訊
Module Size Used by
md5 8001 1
ipv6 240225 15
autofs4 22597 0
i2c_dev 14273 0
i2c_core 25921 1 i2c_dev
sunrpc 142757 1
dm_mirror 28449 0
dm_mod 59973 1 dm_mirror
button 10449 0
battery 12869 0
ac 8773 0
uhci_hcd 32729 0
ehci_hcd 31813 0
hw_random 9557 0
e1000 99757 0
floppy 58065 0
st 40157 0
sg 38113 0
ext3 118729 2
jbd 59481 1 ext3
aic7xxx 146425 7
megaraid_mbox 37073 3
megaraid_mm 17905 1 megaraid_mbox
sd_mod 20545 12
scsi_mod 116941 5 st,sg,aic7xxx,megaraid_mbox,sd_mod

dmesg資訊
Linux version 2.6.9-34.ELsmp () (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 SMP Fri Feb 24 16:54:53 EST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)
BIOS-e820: 000000007ffc0000 - 000000007ffcfc00 (ACPI data)
BIOS-e820: 000000007ffcfc00 - 000000007ffff000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000fec90000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 524224
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 294848 pages, LIFO batch:16
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 DELL ) @ 0x000fd6c0
ACPI: RSDT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x000fd6d4
ACPI: FADT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x000fd708
ACPI: MADT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x000fd77c
ACPI: SPCR (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x000fd824
ACPI: HPET (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x000fd874
ACPI: DSDT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
Enabling APIC mode: Flat. Using 0 I/O APICs
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[32])
IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 32-55
ACPI: IOAPIC (id[0x04] address[0xfec83000] gsi_base[64])
IOAPIC[2]: apic_id 4, version 32, address 0xfec83000, GSI 64-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0xffffffff base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
Initializing CPU#0
CPU 0 irqstacks, hard=c03ea000 soft=c03ca000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2073452k/2096896k available (1868k kernel code, 22488k reserved, 755k data, 180k init, 1179392k highmem)
Using HPET for base-timer
Using HPET for gettimeofday
Detected 2793.520 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 5589.40 BogoMIPS (lpj=2794704)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU0: Initial APIC ID: 0, Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
per-CPU timeslice cutoff: 2926.20 usecs.
task migration cache decay timeout: 3 msecs.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c03eb000 soft=c03cb000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5586.04 BogoMIPS (lpj=2793022)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU1: Initial APIC ID: 1, Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
Total of 2 processors activated (11175.45 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
zapping low mappings.
checking if image is initramfs... it is
Freeing initrd memory: 540k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfbf7e, last bus=9
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PALO._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PALO.DOBA._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PALO.DOBB._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PBLO._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.VPR0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PBHI._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PBHI.PXB1._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PBHI.PXB2._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PICH._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI - using IRQ 0
ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 46 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:03:0b.0[A] -> GSI 37 (level, low) -> IRQ 209
ACPI: PCI interrupt 0000:03:0b.1[B] -> GSI 38 (level, low) -> IRQ 217
ACPI: PCI interrupt 0000:06:07.0[A] -> GSI 64 (level, low) -> IRQ 225
ACPI: PCI interrupt 0000:07:08.0[A] -> GSI 65 (level, low) -> IRQ 233
ACPI: PCI interrupt 0000:09:0d.0[A] -> GSI 18 (level, low) -> IRQ 185
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1164814669.691:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 63EFDF11AD6BAA3
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Intel E7520/7320/7525 detected.<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI - using IRQ 0
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: TEAC CD-ROM CD-224E, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 43690)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S4 S5)
ACPI wakeup devices:
PCI0 PALO PBLO VPR0 PBHI
Freeing unused kernel memory: 180k freed
SCSI subsystem initialized
megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
megaraid: 2.20.4.6 (Release Date: Mon Mar 07 12:27:22 EST 2005)
megaraid: probe new device 0x1028:0x0013:0x1028:0x016d: bus 2:slot 14:func 0
ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 46 (level, low) -> IRQ 201
megaraid: fw version:[513O] bios version:[H418]
scsi0 : LSI Logic MegaRAID driver
scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
Vendor: PE/PV Model: 1x6 SCSI BP Rev: 1.0
Type: Processor ANSI SCSI revision: 02
scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices
scsi[0]: scanning scsi channel 2 [virtual] for logical drives
Vendor: MegaRAID Model: LD 0 RAID1 34G Rev: 513O
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 71024640 512-byte hdwr sectors (36365 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
SCSI device sda: 71024640 512-byte hdwr sectors (36365 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
sda: sda1 sda2 sda3 sda4 < sda5 >
Attached scsi disk sda at scsi0, channel 2, id 0, lun 0
ACPI: PCI interrupt 0000:03:0b.0[A] -> GSI 37 (level, low) -> IRQ 209
ACPI: PCI interrupt 0000:03:0b.1[B] -> GSI 38 (level, low) -> IRQ 217
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36

aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

scsi1:A:0:0: DV failed to configure device. Please file a bug report against this driver.
(scsi1:A:0): 160.000MB/s transfers (80.000MHz DT, offset 31, 16bit)
Vendor: SR 3012U Model: 3 Rev: 0001
Type: Direct-Access ANSI SCSI revision: 03
scsi1:A:0:0: Tagged Queuing enabled. Depth 4
SCSI device sdb: 20971520 512-byte hdwr sectors (10737 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 20971520 512-byte hdwr sectors (10737 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Vendor: SR 3012U Model: 3 Rev: 0001
Type: Direct-Access ANSI SCSI revision: 03
scsi1:A:0:1: Tagged Queuing enabled. Depth 4
SCSI device sdc: 192413696 512-byte hdwr sectors (98516 MB)
SCSI device sdc: drive cache: write back
SCSI device sdc: 192413696 512-byte hdwr sectors (98516 MB)
SCSI device sdc: drive cache: write back
sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 >
Attached scsi disk sdc at scsi1, channel 0, id 0, lun 1
scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36

aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs

(scsi2:A:5): 80.000MB/s transfers (40.000MHz, offset 32, 16bit)
Vendor: SEAGATE Model: DAT DAT72-052 Rev: A060
Type: Sequential-Access ANSI SCSI revision: 03
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
Attached scsi generic sg0 at scsi0, channel 0, id 6, lun 0, type 3
Attached scsi generic sg1 at scsi0, channel 2, id 0, lun 0, type 0
Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 0
Attached scsi generic sg3 at scsi1, channel 0, id 0, lun 1, type 0
Attached scsi generic sg4 at scsi2, channel 0, id 5, lun 0, type 1
st: Version 20040403, fixed bufsize 32768, s/g segs 256
Attached scsi tape st0 at scsi2, channel 0, id 5, lun 0
st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 1048575
st0: Block limits 1 - 16777215 bytes.
inserting floppy driver for 2.6.9-34.ELsmp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Intel(R) PRO/1000 Network Driver - version 6.1.16-k3-NAPI
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI interrupt 0000:06:07.0[A] -> GSI 64 (level, low) -> IRQ 225
divert: allocating divert_blk for eth0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI interrupt 0000:07:08.0[A] -> GSI 65 (level, low) -> IRQ 233
divert: allocating divert_blk for eth1
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
pciehp: Address64 -------- Resource unparsed
Evaluate _OSC Set fails. Status = 0x0005
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(2) at s:b:d:f=0x00:04:1f:00
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(3) at s:b:d:f=0x00:08:1f:00
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: Both _OSC and OSHP methods do not exist
pciehp: Address64 -------- Resource unparsed
Evaluate _OSC Set fails. Status = 0x0005
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(2) at s:b:d:f=0x00:04:1f:00
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(3) at s:b:d:f=0x00:08:1f:00
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: Both _OSC and OSHP methods do not exist
pciehp: Address64 -------- Resource unparsed
Evaluate _OSC Set fails. Status = 0x0005
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(2) at s:b:d:f=0x00:04:1f:00
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(3) at s:b:d:f=0x00:08:1f:00
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: Both _OSC and OSHP methods do not exist
pciehp: Address64 -------- Resource unparsed
Evaluate _OSC Set fails. Status = 0x0005
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(2) at s:b:d:f=0x00:04:1f:00
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(3) at s:b:d:f=0x00:08:1f:00
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: Both _OSC and OSHP methods do not exist
hw_random hardware driver 1.0.0 loaded
pciehp: Address64 -------- Resource unparsed
Evaluate _OSC Set fails. Status = 0x0005
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(2) at s:b:d:f=0x00:04:1f:00
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(3) at s:b:d:f=0x00:08:1f:00
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: Both _OSC and OSHP methods do not exist
pciehp: Address64 -------- Resource unparsed
Evaluate _OSC Set fails. Status = 0x0005
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(2) at s:b:d:f=0x00:04:1f:00
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(3) at s:b:d:f=0x00:08:1f:00
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: Both _OSC and OSHP methods do not exist
pciehp: Address64 -------- Resource unparsed
Evaluate _OSC Set fails. Status = 0x0005
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(2) at s:b:d:f=0x00:04:1f:00
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(3) at s:b:d:f=0x00:08:1f:00
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: Both _OSC and OSHP methods do not exist
pciehp: Address64 -------- Resource unparsed
Evaluate _OSC Set fails. Status = 0x0005
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(2) at s:b:d:f=0x00:04:1f:00
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.PBLO OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(3) at s:b:d:f=0x00:08:1f:00
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: acpi_pciehprm:_SB_.PCI0.VPR0 OSHP fails=0x5
pciehp: Both _OSC and OSHP methods do not exist
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 193, pci mem f886c000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 169, io base 00002ce0
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 177, io base 00002cc0
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
uhci_hcd 0000:00:1d.2: UHCI Host Controller
usb 1-3: new high speed USB device using address 2
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 2 ports detected
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 185, io base 00002ca0
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ACPI: Power Button (FF) [PWRF]
EXT3 FS on sda5, internal journal
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2096472k swap on /dev/sda3. Priority:-1 extents:1
IA-32 Microcode Update Driver: v1.14 <>
microcode: CPU0 updated from revision 0x9 to 0x12, date = 11222004
microcode: CPU1 updated from revision 0x9 to 0x12, date = 11222004
IA-32 Microcode Update Driver v1.14 unregistered
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
ip_tables: (C) 2000-2002 Netfilter core team
e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
i2c /dev entries driver
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0342040(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth0: no IPv6 routers present
eth1: no IPv6 routers present