RedHat 9上ADSL最終解決方案(轉)

BSDLite發表於2007-08-15
RedHat 9上ADSL最終解決方案(轉)[@more@]在LINUXSIR和LINUXFANS上看了很多關於ADSL的文章,都沒有解決我的REDHAT9上ADSL上網的問題,今天實在是沒有辦法,重新建立連線,曲折的經歷,終於上網了(非常激動,可能表達的不是很好),特的寫下我的過程,作為參考:

REDHAT 預設的PPPOE有問題,需要RPM -E,然後,安裝這個北南兄推薦)解壓和安裝: #tar zxvf rp-pppoe-3.5.tar.gz進入解壓目錄執行#sh ./go

然後再來設定ADSL。這一處,我們要用命令。

#adsl-setup

Welcome to the Roaring Penguin ADSL client setup. First, I will runsome checks on your system to make sure the PPPoE client is installedproperly...

Looks good! Now, please enter some information:

USER NAME

>>> Enter your PPPoE user name (default XXX): 在這裡輸入ADSL的使用者名稱

INTERFACE

>>> Enter the Ethernet interface connected to the ADSL modemFor Solaris, this is likely to be something like /dev/hme0.For Linux, it will be ethn, where 'n' is a number.(default eth0):如果一張網路卡就設定寫上eth0

Do you want the link to come up on demand, or stay up continuously?If you want it to come up on demand, enter the idle time in secondsafter which the link should be dropped. If you want the link tostay up permanently, enter 'no' (two letters, lower-case.)NOTE: Demand-activated links do not interact well with dynamic IPaddresses. You may have some problems with demand-activated links.>>> Enter the demand value (default no):不用寫什麼

DNSPlease enter the IP address of your ISP's primary DNS server.If your ISP claims that 'the server will provide DNS addresses',enter 'server' (all lower-case) here.If you just press enter, I will assume you know what you aredoing and not modify your DNS setup.>>> Enter the DNS information here:在這裡寫上202.96.134.133下一個DNS是202.96.168.68 //這裡根據個人不同可以修改

PASSWORD

>>> Please enter your PPPoE password:輸入密碼>>> Please re-enter your PPPoE password:再輸入一次

FIREWALLING

Please choose the firewall rules to use. Note that these rules arevery basic. You are strongly encouraged to use a more sophisticatedfirewall setup; however, these will provide basic security. If youare running any servers on your machine, you must choose 'NONE' andset up firewalling yourself. Otherwise, the firewall rules will denyaccess to all standard servers like Web, e-mail, ftp, etc. If youare using SSH, the rules will block outgoing SSH connections whichallocate a privileged source port.

The firewall choices are:0 - NONE: This script will not set any firewall rules. You are responsiblefor ensuring the security of your machine. You are STRONGLYrecommended to use some kind of firewall rules.1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation2 - MASQUERADE: Appropriate for a machine acting as an Internet gatewayfor a LAN>>> Choose a type of firewall (0-2):這裡添寫為2

** Summary of what you entered **

Ethernet Interface: eth0User name: XXXActivate-on-demand: NoDNS: Do not adjustFirewalling: MASQUERADE

>>> Accept these settings and adjust configuration files (y/n)?

弄完後,就按一個y鍵。(以上為北南兄文章裡面內容)不要急於連線,REBOOT -N然後進入網路設定,停止ETH1(我的是用他)然後ADSL-STARTPING 你的DNS,如果可以,那麼,恭喜你!其中部分內容可能不同,僅作參考,主要在連線後,能夠PING通DNS即可!

來自 “ ITPUB部落格 ” ,連結:http://blog.itpub.net/10617542/viewspace-960130/,如需轉載,請註明出處,否則將追究法律責任。

相關文章