Exadata虛擬機器模擬--安裝儲存節點
OS:OEL5.6-x86-64(關閉UEK) V24479-01.zip
Storage SOFT:V46145-01.zip
（Release:Oracle Exadata Storage Server 11.2.3.3. ----）
============
環境準備：
mkdir -p /var/log/oracle
chmod -R 775 /var/log/oracle
配置yum安裝軟體包：yum install oracle-validated
關閉uek核心
1,安裝jdk
//***解壓：V46145-01.zip 軟體獲取jdk,和cell-軟體安裝包。
[root@ora1 cellbits]# pwd
/root/dl180/boot/cellbits
[root@ora1 cellbits]# tar -xvf cellrpms.tbz
cellrpmlist
exadata-firmware-cell-11.2.3.3.1.140708-1.x86_64.rpm
exadata-validations-cell-11.2.3.3.1.140708-1.x86_64.rpm
extradepsrpmlist
image_functions
imagerpmlist
install.sh
jdk-1.7.0_55-fcs.x86_64.rpm
python-numeric-23.7-2.2.2.el5_6.1.x86_64.rpm
scsi-target-utils-1.0.14-2.el5.x86_64.rpm
selinux-policy-2.4.6-346.el5.noarch.rpm
selinux-policy-targeted-2.4.6-346.el5.noarch.rpm
[root@ora1 cellbits]#
[root@ora1 cellbits]# rpm -ivh jdk-1.7.0_55-fcs.x86_64.rpm
warning: jdk-1.7.0_55-fcs.x86_64.rpm: Header V3 DSA/SHA1 Signature, key ID 1e5e0159: NOKEY
Preparing... ########################################### [100%]
1:jdk ########################################### [100%]
Unpacking JAR files...
rt.jar...
jsse.jar...
charsets.jar...
tools.jar...
localedata.jar...
jfxrt.jar...
2,安裝cell軟體
[root@ora1 cellbits]# unzip cell.bin
Archive: cell.bin
warning [cell.bin]: 20038 extra bytes at beginning or within zipfile
(attempting to process anyway)
inflating: cell-11.2.3.3.1_LINUX.X64_140708-1.x86_64.rpm
[root@ora1 cellbits]# rpm -ivh cell-11.2.3.3.1_LINUX.X64_140708-1.x86_64.rpm
Preparing... ########################################### [100%]
Pre Installation steps in progress ...
1:cell ########################################### [100%]
Post Installation steps in progress ...
Set cellusers group for /opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/cellsrv/deploy/log directory
Set 775 permissions for /opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/cellsrv/deploy/log directory
/
/
Installation SUCCESSFUL.
Starting RS and MS... as user celladmin
Done. Please Login as user celladmin and create cell to startup CELLSRV to complete cell configuration.
If this is a manual installation, please stop and restart ExaWatcher to pick up newly installed binaries.
You can run "/opt/oracle.ExaWatcher/ExaWatcher.sh --stop" and then "/opt/oracle.ExaWatcher/ExaWatcher.sh --fromconf" to stop and restart ExaWatcher.
Logout and then re-login to use the new cell environment.
3,初始化磁碟
mkdir -p /opt/oracle/cell/disks/raw
cd /opt/oracle/cell/disks/raw
dd.sh
dd if=/dev/zero of=disk01 bs=100M count=10
dd if=/dev/zero of=disk02 bs=100M count=10
dd if=/dev/zero of=disk03 bs=100M count=10
dd if=/dev/zero of=disk04 bs=100M count=10
dd if=/dev/zero of=disk05 bs=100M count=10
dd if=/dev/zero of=disk06 bs=100M count=10
dd if=/dev/zero of=disk07 bs=100M count=10
dd if=/dev/zero of=disk08 bs=100M count=10
dd if=/dev/zero of=disk09 bs=100M count=10
dd if=/dev/zero of=disk10 bs=100M count=10
dd if=/dev/zero of=disk11 bs=100M count=10
dd if=/dev/zero of=disk12 bs=100M count=10
dd if=/dev/zero of=FLASH01 bs=100M count=10
dd if=/dev/zero of=FLASH02 bs=100M count=10
dd if=/dev/zero of=FLASH03 bs=100M count=10
dd if=/dev/zero of=FLASH04 bs=100M count=10
生成磁碟：
[root@ora1 raw]# ./dd.sh <======生成磁碟
進行賦權：
[root@ora1 raw]# chmod 660 * <======修改許可權
刪掉dd.sh
[root@ora1 raw]# rm dd.sh
4,重新啟動cell 服務
4.1 修改系統引數：（/etc/sysctl.conf）
cat >> /etc/sysctl.conf<<eof
kernel.shmall = 4294967296</eof
fs.file-max = 6815744
eof
sysctl -p 《---生效
cat >> /etc/security/limits.conf <<eof <="" eof
* soft nofile 65536
* hard nofile 65536
eof
4.2 切換到celladmin下重啟cell服務
[root@ora1 disks]# su - celladmin
[celladmin@ora1 ~]$ cellcli -e alter cell restart services all
Stopping the RS, CELLSRV, and MS services...
The SHUTDOWN of services was successful.
Starting the RS, CELLSRV, and MS services...
Getting the state of RS services... running
Starting CELLSRV services...
The STARTUP of CELLSRV services was not successful.
CELL-01553: Incorrect IP in cellinit.ora. IP is invalid or has incorrect/missing netmask. Please refer to RS incident log.
Starting MS services...
The STARTUP of MS services was successful.
4.3配置ip配置
cellcli -e create cell cell1 interconnect1=eth0
[celladmin@ora1 ~]$ cellcli -e create cell cell1 interconnect1=eth0
Cell cell1 successfully created
Starting CELLSRV services...
The STARTUP of CELLSRV services was successful.
5.檢查磁碟狀態
[celladmin@cell01 ~]$ cellcli -e 'LIST PHYSICALDISK'
/opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/FLASH01 /opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/FLASH01 normal
/opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk01 /opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk01 normal
/opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk02 /opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk02 normal
/opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk03 /opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk03 normal
/opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk04 /opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk04 normal
/opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk05 /opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk05 normal
/opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk06 /opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk06 normal
/opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk07 /opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk07 normal
/opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk08 /opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk08 normal
/opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk09 /opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk09 normal
/opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk10 /opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk10 normal
/opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk11 /opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk11 normal
/opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk12 /opt/oracle/cell11.2.3.3.1_LINUX.X64_140708/disks/raw/disk12 normal
安裝完畢！
錯誤：
[celladmin@ora1 config]$ cellcli -e create cell cell1 interconnect1=eth0
CELL-01514: Connect Error. Verify that Management Server is listening at the specified HTTP port: 8888.
[root@ora1 trace]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 《===刪除--
192.168.1.201 ora1
來自 “ ITPUB部落格 ” ，連結：http://blog.itpub.net/20747382/viewspace-2138127/，如需轉載，請註明出處，否則將追究法律責任。
請登入後發表評論
登入
全部評論
相關文章
- exadata vmwate 安裝儲存節點
- 安裝虛擬機器虛擬機
- xen安裝半虛擬化虛擬機器虛擬機
- 虛擬機器做ISCSI共享儲存虛擬機
- LEDE 虛擬機器安裝虛擬機
- 虛擬機器安裝ubuntu虛擬機Ubuntu
- ubuntu虛擬機器安裝Ubuntu虛擬機
- Android studio虛擬模擬器安裝問題Android
- CentOS 7 安裝虛擬機器CentOS虛擬機
- 使用虛擬機器安裝Kail虛擬機AI
- kvm 安裝 windows 虛擬機器Windows虛擬機
- Mac 安裝Windows虛擬機器MacWindows虛擬機
- MacOS安裝虛擬機器教程Mac虛擬機
- centos中安裝虛擬機器CentOS虛擬機
- 虛擬機器kali安裝vmtools虛擬機
- KVM [ 4 ] --- KVM虛擬機器管理：儲存池，虛擬機器快照，網路網橋虛擬機
- 20932虛擬儲存器
- 第5章 虛擬儲存器
- 【計組】3.7 虛擬儲存器
- 虛擬機器環境下RAC加入節點虛擬機
- Centos7虛擬機器安裝CentOS虛擬機
- 在虛擬機器中安裝ftp虛擬機FTP
- 單個虛擬機器安裝spark虛擬機Spark
- 虛擬機器Tomcat的安裝虛擬機Tomcat
- Linux 安裝 KVM 虛擬機器Linux虛擬機
- 在虛擬機器安裝OpenSuse Tumbleweed虛擬機
- 虛擬機器安裝rac傻瓜教程虛擬機
- CentOS 7虛擬機器安裝教程CentOS虛擬機
- 虛擬機器安裝 gho系統虛擬機
- mac 裝虛擬機器Mac虛擬機
- win10安裝xp虛擬機器安裝教程_win10安裝xp虛擬機器詳細步驟Win10虛擬機
- Dalvik虛擬機器、Java虛擬機器與ART虛擬機器虛擬機Java
- mac裝win10虛擬機器教程_mac怎麼安裝win10虛擬機器MacWin10虛擬機
- Homestead 虛擬機器安裝步驟虛擬機
- 【虛擬機器】VMware-VMware Tool安裝虛擬機
- linux 虛擬機器下 安裝redisLinux虛擬機Redis
- 虛擬機器Centos安裝docker小記虛擬機CentOSDocker
- kvm之三：本地安裝虛擬機器虛擬機