HPUX上誤刪dev檔案的整個過程_20100621
HPUX上誤刪/dev/檔案的整個過程.
環境: HPUX 11.23 Superdome
HPUX01 為出問題的機器
HPUX02 為正常的機器
HPUX01, HPUX02組成Oracle9i RAC,使用ServerGuide作叢集，沒有使用包．
問題:
1 在/dev/目錄下執行了rm ./* 命令，將/dev、目錄下的所有檔案都刪除了，但是子目錄下的檔案是還在。
2 當前儲存的最新的磁帶備份是在5.25號做的，在此之後做的一些動作
1) 新建了/dev/vg_cdz /dev/vg_ggs/
2) 配置了lan4
3) 做了ServerGuide
可能的方案：
1 能否從磁帶備份裡恢復部分檔案，如何做？
2 已報HP 800電話，請求幫助。
解決的過程：
##########################################################################
HP工程師1的方案：
##########################################################################
1 mt -f /dev/rmt/0mn rew
2 mt -f /dev/rmt/0mn fsf 22
3 tar -xvf /dev/rmt/0mn /dev/
我們的擔心,是這可能會覆蓋原有的目錄檔案,對後面的資料庫VG,ServerGuide造成影響．
所以對這個方案沒有實施
對這個方案我們做了一個測試：
hpux01#[/home/oracle/temp]mt -f /dev/rmt/0mn rew
hpux01#[/home/oracle/temp]mt -f /dev/rmt/0mn fsf 22
hpux01#[/home/oracle/temp]tar -xvf /dev/rmt/0mn dev/ttyq0
dev/ttyq0: cannot link
這裡是恢復不成功的?
hpux01#[/home/oracle/temp]mt -f /dev/rmt/0mn rew
hpux01#[/home/oracle/temp]mt -f /dev/rmt/0mn fsf 22
hpux01#[/home/oracle/temp]tar -xvf /dev/rmt/0mn dev/netlog
x dev/netlog, 0 bytes, 0 blocks, character device
這裡等了很久才退出．超過１個鐘，這是不是因為要讀完整個tape才退出呢？
hpux01#[/home/oracle/temp] ls -l /dev/rmt/0mn dev/netlog
crw-r--r-- 1 bin bin 46 0x000001 Sep 9 2004 netlog
這裡是恢復成功的．
為什麼一個成功，一個不成功呢？不清楚原因
##########################################################################
HP工程師2的方案
##########################################################################
方案1:
1 mt -f /dev/rmt/0mn rew
2 mt -f /dev/rmt/0mn fsf 22
3 mkdir /test
4 pax -rf /dev/rmt/0mn -s/dev/test/p /dev
操作過程
hpux01#[/home/oracle/temp]cd /
hpux01#[/]mkdir test
hpux01#[/]pax -rf /dev/rmt/0mn -s/dev/test/p /dev
pax: The archive is empty.
hpux01#[/]
hpux01#[/]pax -rf /dev/rmt/0mn -s/dev/test/p /dev
pax: [offset 0g+0m+0k+0]: I/O error
pax: Unable to determine the archive format.
hpux01#[/]mt -f /dev/rmt/0mn rew
hpux01#[/] mt -f /dev/rmt/0mn fsf 22
hpux01#[/]pax -rf /dev/rmt/0mn -s/dev/test/p /dev
usr/share/man/man2.Z/pstat_getcrashdev.2 >> usr/share/man/man2.Z/pstat_getcrashtest.2
usr/share/man/man3.Z/fstatvfsdev64.3s >> usr/share/man/man3.Z/fstatvfstest64.3s
usr/share/man/man3.Z/fstatfsdev.3c >> usr/share/man/man3.Z/fstatfstest.3c
usr/share/man/man3.Z/statfsdev.3c >> usr/share/man/man3.Z/statfstest.3c
......(省略了一些log)
dev/rmt/c45t0d1BESTn >> test/rmt/c45t0d1BESTn
dev/rmt/24mn >> test/rmt/24mn
dev/rmt/c45t0d1BESTb >> test/rmt/c45t0d1BESTb
dev/rmt/24mb >> test/rmt/24mb
dev/rmt/c45t0d1BESTnb >> test/rmt/c45t0d1BESTnb
dev/rmt/24mnb >> test/rmt/24mnb
dev/rmt/c44t1d1BEST >> test/rmt/c44t1d1BEST
dev/rmt/25m >> test/rmt/25m
dev/ptym/ptyp0 >> test/ptym/ptyp0
dev/ptyp1 >> test/ptyp1
dev/ptym/ptyp1 >> test/ptym/ptyp1
dev/ptyp2 >> test/ptyp2
dev/ptym/ptyp2 >> test/ptym/ptyp2
dev/ptyp3 >> test/ptyp3
dev/ptym/ptyp3 >> test/ptym/ptyp3
dev/ptyp4 >> test/ptyp4
dev/ptym/ptyp4 >> test/ptym/ptyp4
dev/ptyp5 >> test/ptyp5
dev/ptym/ptyp5 >> test/ptym/ptyp5
dev/ptyp6 >> test/ptyp6
dev/ptym/ptyp6 >> test/ptym/ptyp6
dev/ptyp7 >> test/ptyp7
dev/ptym/ptyp7 >> test/ptym/ptyp7
dev/ptyp8 >> test/ptyp8
dev/ptym/ptyp8 >> test/ptym/ptyp8
dev/ptyp9 >> test/ptyp9
......(省略了一些log)
dev/ttyrd >> test/ttyrd
dev/pty/ttyre >> test/pty/ttyre
dev/ttyre >> test/ttyre
dev/pty/ttyrf >> test/pty/ttyrf
dev/ttyrf >> test/ttyrf
usr/lib/nls/msg/zh_HK.utf8/audevent.cat >> usr/lib/nls/msg/zh_HK.utf8/autestent.cat
usr/lib/nls/msg/zh_TW.utf8/audevent.cat >> usr/lib/nls/msg/zh_TW.utf8/autestent.cat
usr/lib/nls/msg/fr_CA.utf8/audevent.cat >> usr/lib/nls/msg/fr_CA.utf8/autestent.cat
usr/lib/nls/msg/fr_FR.utf8/audevent.cat >> usr/lib/nls/msg/fr_FR.utf8/autestent.cat
usr/lib/nls/msg/fr_CA.iso88591/audevent.cat >> usr/lib/nls/msg/fr_CA.iso88591/autestent.cat
usr/lib/nls/msg/fr_FR.iso88591/audevent.cat >> usr/lib/nls/msg/fr_FR.iso88591/autestent.cat
usr/dt/appconfig/types/fr_CA.iso88591/develop.dt >> usr/dt/appconfig/types/fr_CA.iso88591/testelop.dt
usr/dt/appconfig/types/fr_FR.iso88591/develop.dt >> usr/dt/appconfig/types/fr_FR.iso88591/testelop.dt
pax: /dev not found in archive
You have mail in /var/mail/root
這個做到中間時 報錯/dev not found in archive
同時在/test目錄下並沒有找到任何檔案
方案1失敗.
方案2
1 mt -f /dev/rmt/0mn rew
2 mt -f /dev/rmt/0mn fsf 22
3 tar -xvf /dev/rmt/0mm /dev/(這個沒做)
我們的擔心,是這可能會覆蓋原有的目錄檔案,對後面的資料庫VG,ServerGuide造成影響．
所以對這個方案沒有實施
##########################################################################
我們自己現在做的唯一一個方案：
##########################################################################
cd /u01/vgbackup/temp
mt -f /dev/rmt/0mn rew
mt -f /dev/rmt/0mn fsf 22
pax -s !\/!.\/! -rvf /dev/rmt/0mn
這樣的話所有檔案都恢復到了/u01/vgbackup/temp下面
cd /u01/vgbackup/temp
hpux01[/u01/vgbackup/temp]$ls -l
total 338
-rw-r--r-- 1 root sys 98872 Jan 28 10:38 2
drwxr-xr-x 2 root sys 96 Jun 12 23:41 SD_CDROM.
lr-xr-xr-x 1 root sys 8 Jun 12 23:36 bin -> /usr/bin
drwxr-xr-x 2 root sys 96 Jun 12 23:41 cdrom.
drwxr-xr-x 22 root sys 5120 Jun 12 23:36 dev.
drwxr-xr-x 32 root sys 6144 Jun 12 23:36 etc.
drwxr-xr-x 2 root sys 96 Jun 12 23:35 home.
lr-xr-xr-x 1 root sys 8 Jun 12 23:36 lib -> /usr/lib
drwxr-xr-x 2 root sys 96 Jun 12 23:41 lost+found.
-rw-r--r-- 1 root sys 47200 Aug 31 2009 manifest
-rw-r--r-- 1 root sys 0 Mar 20 2009 mapfile
drwxrwxrwx 2 root sys 96 Jun 12 23:41 mnt.
drwxr-xr-x 2 root sys 96 Jun 12 23:41 net.
-rw------- 1 root sys 41 Jun 10 2009 nohup.out
drwxr-xr-x 90 root sys 2048 Jun 12 23:54 opt.
drwxrwxrwx 2 root sys 96 Jun 12 23:41 oracle.
drwxr-xr-x 15 root sys 4096 Jun 12 23:36 sbin.
drwxr-xr-x 9 root sys 1024 Jun 12 23:33 stand.
drwxr-xr-x 2 root sys 96 Jun 12 23:41 testlv.
drwxrwxrwt 20 root sys 4096 Jun 12 23:42 tmp.
drwxrwxrwx 3 root sys 96 Jun 12 23:35 u01.
drwxr-xr-x 23 root sys 1024 Jun 12 23:59 usr.
drwxr-xr-x 24 root sys 1024 Jun 13 00:08 var.
結果是：檔案是恢復回來了，但檔案的 型別 和 屬主,許可權這些發生了變化
屬主，許可權可以改，但檔案型別卻不好辦了
如：
這是新還原的檔案
hpux01[/u01/vgbackup/temp/dev.]$ls -l ttyq0
-rw-r--r-- 1 root sys 0 Sep 9 2004 ttyq0
這是舊的檔案
hpux02[/dev]$ls -l ttyq0
crw-rw-rw- 2 bin tty 17 0x000010 Sep 9 2004 ttyq0
後來查man才知道
-pe 選項可以retain 許可權相關的資訊
-e Retains the user ID, group ID, access permission,access time, and modification time.
但檔案型別的改變仍然無法解決．
#############################################################################
本來打算的最後嘗試:
1 mt -f /dev/rmt/0mn rew
2 mt -f /dev/rmt/0mn fsf 22
3 tar -xvfp /dev/rmt/0mn /dev/
4 cp /hom/oracle/dev.tar 中的檔案回去覆蓋從磁帶中拷回來的，但沒有被刪除的．
但，tar命令這裡，還要找下引數，保持許可權 -p
tar -xvfp /dev/rmt/0mn /dev/
在跟HPUX的工程師交流下，結論是部分恢復/dev是不行的．只能做基於磁帶的恢復．
#############################################################################
基於磁帶的恢復:
恢復前備份的目錄,把要備份的目錄都直接copy 到 /u01/ggs目錄下(這個ggs所在的vg可以在19上掛載)
1> Oracle相關的目錄:
1 /u01/app/oracle
2 /etc/
3 /opt/galaxy
cd /u01/ggs
mkdir oracle
mkdir etc
mkdir galaxy
cd /u01/app/oracle/
tar -cvf oracle.tar *
cp oracle.tar /u01/ggs/backup/oracle/
mv oracle.tar /tmp/
cd /etc/
tar -cvf etc.tar *
cp etc.tar /u01/ggs/backup/etc/
mv etc.tar /tmp/
cd /opt/galaxy
tar -cvf galaxy.tar *
cp galaxy.tar /u01/ggs/backup/galaxy
mv galaxy.tar /tmp
2> ServerGuide相關的目錄
1 /etc/cmcluster/cmclconf.ascii (已包含在/etc/*下)
3> VG相關的資訊(匯出所有VG的相關資訊)
vgdisplay |grep "VG Name"
vgexport -pvs -m /tmp/vg_cdz.mymap /dev/vg_cdz
vgexport -pvs -m /tmp/vg_oradata.mymap /dev/vg_oradata
vgexport -pvs -m /tmp/vg_arch1.mymap /dev/vg_arch1
vgexport -pvs -m /tmp/vg_arch2.mymap /dev/vg_arch2
vgexport -pvs -m /tmp/vg_ggs.mymap /dev/vg_ggs
vgexport -pvs -m /tmp/vg_arch_cdz1.mymap /dev/vg_arch_cdz1
vgexport -pvs -m /tmp/vg_orabackup.mymap /dev/vg_orabackup
vgexport -pvs -m /tmp/vg00.mymap /dev/vg00
vgexport -pvs -m /tmp/vglock.mymap /dev/vglock
mkdir -p /u01/ggs/backup/map
cp /tmp/*.mymap /u01/ggs/backup/map
4> 網路相關的資訊
/etc/rc.config.d/netconf (已包含在/etc/*下)
最後再透過
找到最近20天有變更的檔案，再備份
find / -type f -mtime -20 > /tmp/new.list
cp /tmp/new.list /u01/ggs/backup/
cd /stand
tar -cvf /u01/ggs/backup/stand.tar *
cd /opt
tar -cvf /u01/ggs/backup/partopt.tar hpsmh/data/htdocs/navfile.htm \
hpsmh/conf/php.ini \
hpsmh/conf/smhpd.conf \
hpsmh/conf/hmmolist.map \
VRTSob/providers/ActionProvider/db/RecipientBroker/0xffffffff.xml \
sfm/conf/fm_diaglogd_cfg.bin \
galaxy/iDataAgent/jobResults/CV_JobResults/reserveFile \
APPQcime/conf/jswwrapper.conf
cd /usr
tar -cvf /u01/ggs/backup/TT_DB.tar TT_DB
cd /var
tar -cvf /u01/ggs/backup/var_opt.tar opt
cd /var
tar -cvf /u01/ggs/backup/var_adm.tar adm
cd /var/
tar -cvf /u01/ggs/backup/part_var.tar sam/log/samlog \
sam/IOPARSER.work \
sam/ug_subareas/users \
sam/IOPARSER.dion \
sam/IOPARSER.iout \
statmon/state \
vx/alloc/attributes.config \
tombstones/cpumap
cd /var
tar -cvf /u01/ggs/backup/var_stm.tar stm
cd /home/oracle
tar -cvf /u01/ggs/backup/home_oracle_sh.tar .profile bin/checksys.sh .Xauthority
做完了
重啟作業系統前要做的事:
關掉資料庫 rnc1, cdzhp1, itsm1,
umount /u01/app/archivelog/cdz2
umount /u01/app/archivelog/cdz1
umount /u01/app/archivelog/rnc2
umount /u01/app/archivelog/rnc1
umount /u01/app/archivelog/itsm2
umount /u01/vgbackup
umount /u01/ggs
把vg_ggs unactive.
vgchange -a n /dev/vg_ggs
vgchange -a n /dev/vg_oradata
vgchange -a n /dev/vg_cdz
vgchange -a n /dev/vg_orabackup
vgchange -a n /dev/vg_arch_cdz1
vgchange -a n /dev/vg_arch1
已做
停止18節點上的SG
cmviewcl -v
cmhaltnode -f -v hpux01
已做
hpux01#[/stand]cmhaltnode -f -v hpux01
cmhaltnode : Unable to connect to the local cluster: No such file or directory.
Either no cluster configuration file exists, the file is corrupted,
cmclconfd is unable to run, or user root on node hpux01
doesn't have access to view the configuration.
You have mail in /var/mail/root
這裡在有問題的節點HPUX01上，停止不了SG，但在另一個節點可以停止．
在另一個正常的節點上：
hpux02#[/]cmhaltnode -f -v hpux01
Node hpux01 is already halted.
Successfully halted all nodes specified.
這裡雖然停止了節點1上的SG,但狀態仍顯示為up,原因可能是狀態資訊傳遞不過來.
關於這個問題，見附錄2.
停止 crontab
已做
修改備份軟體的Media_Agent
已做
重啟做磁帶恢復
磁帶恢復的過程見最後附錄1
已完成
##############################################################################
重配置VG,SG資訊, LAN4,和一些事情，再整理!
在做完基於磁帶的恢復後，如何來還原後面做的一些工作呢?
1 關於VG
hpux01#[/]vgdisplay |grep "VG Name"
vgdisplay: Volume group not activated.
vgdisplay: Cannot display volume group "/dev/vg_oradata".
vgdisplay: Volume group not activated.
vgdisplay: Cannot display volume group "/dev/vglock".
vgdisplay: Volume group not activated.
vgdisplay: Cannot display volume group "/dev/vg_arch2".
vgdisplay: Volume group not activated.
vgdisplay: Cannot display volume group "/dev/vg_ggs".
VG Name /dev/vg00
VG Name /dev/vg_arch1
重新啟用vg_oradata,(新增到叢集中)
vgchange -a y vg_oradata
重導VG_CDZ.
mkdir /dev/vg_cdz
mknod /dev/vg_cdz/group c 64 0x080000
vgimport -s -m /tmp/vg_cdz.mymap /dev/vg_cdz /dev/dsk/c23t1d4 (匯入卷組資訊，)
重導vg_orabackup
mkdir /dev/vg_orabackup
mknod /dev/vg_orabackup/group c 64 0x090000
vgimport -s -m /tmp/vg_orabackup.mymap /dev/vg_backup (匯入卷組資訊，)
重導vg_arch_cdz1
mkdir /dev/vg_arch_cdz1
mknod /dev/vg_arch_cdz1/group c 64 0x0A0000
vgimport -s -m /tmp/vg_arch_cdz1.mymap /dev/vg_arch_cdz1
載入檔案系統
重建vg_arhc_cdz2
pvcreate
mkdir /dev/vg_arch_cdz2
mknod /dev/vg_arch_cdz2/group c 64 0x0B0000
vgimport -s -m /tmp/vg_arch_cdz2.mymap /dev/vg_arch_cdz1
載入檔案系統
2 關於叢集
把節點2上的叢集配置資訊拷回到節點１
重新應用叢集配置資訊
3 關於資料庫
新建的例項，如何來恢復？
直接全部恢復/u01/app/oralce目錄是否可以？？是可以的
直接複製回去,在復回去之前先把現存的放到/tmp下
cd /u01/app/oracle
mv ./* /tmp
scp /u01/ggs/backup/oracle/* ./
不過最後實施的時候，發現其實只要新增幾個檔案即可(這也說明了Oracle新建一個Instance要更改的檔案也就如下幾個)
/u01/app/oracle/product/9i/network/admin/*.ora
/u01/app/oracle/product/9i/dbs/orapw*
/u01/app/oracle/oraInventory/ContentsXML
/u01/app/oracle/admin/cdzhp (目錄)
/u01/app/oracle/product/9i/dbs/initcdzhp1.ora
4 關於網路
lan4,
重新起服務．
hp01、hp02上在lan4網路卡上新增IP10.230.16.4，並設定為不隨機啟動。
備份/etc/rc.config.d/netconf
編輯/etc/rc.config.d/netconf檔案，更改其中的網路卡的IP地址。
INTERFACE_NAME[3]=lan4
IP_ADDRESS[3]=10.230.16.4
SUBNET_MASK[3]=255.255.255.0
INTERFACE_STATE[3]=down
更改後需要執行：
/sbin/init.d/net stop
/sbin/init.d/net start
來重起網路服務
5 其它
5.1 備份軟體，
5.2 Goldengate
載入vg_ggs，重新測試
###############################################################################
結論與經驗教訓：
1 透過磁帶的恢復和後面做的一些重配工作，系統已恢復正常使用．
2 在生產上操作要慢,三思而後行．
3 備份重於一切，但恢復的測試也同樣重要．(否則光備份，遇到需要恢復時沒做過，同樣不會做，平時要找機會測試恢復)
4 RM真的是危險的,請永遠不要使用它．( 在環境變數中用別名代替 alias rm="mv" )
5 在整個事件的解決過程中，跟5個HP工程師有過溝通．感謝他們提供的幫助．
6 武裝自己的技術力量，結交更多的同行，這樣在有問題的時候也可提供幫助．
附錄1：
HPUX 磁帶恢復的大概過程：
進入CM重啟作業系統，執行RS後回到主目錄，再進入CO,才可以看到系統的檢測過程
CM>rs (重啟)
Ctrl +B 返回 Main Menu
進入CO，檢視啟動過程．
在 To discontiune autoboot, press any key to interrupt時，按任意鍵中斷
再選擇透過磁帶啟動．
如下
EFI Boot Manager ver 1.10 [14.61] Please select a boot option
OS might use only the primary console set via boot manager or conconfig command
HP-UX Primary Boot: 0/0/1/1/0.0.0
LAN [Acpi(HWP0002,PNP0A03,4)/Pci(1|0)/Mac(0018FE2DBECF)]
LAN [Acpi(HWP0002,PNP0A03,9)/Pci(1|0)/Mac(001A4B082AC6)]
LAN [Acpi(HWP0002,PNP0A03,9)/Pci(1|1)/Mac(001A4B082AC7)]
EFI Shell [Built-in]
LAN [Acpi(HWP0002,PNP0A03,2)/Pci(1|0)/Mac(0018FE2DBD59)]
Tape
DVD
Boot Option Maintenance Menu
Use ^ and v to change option(s). Use Enter to select an option
Use > and < to view long descriptions
Hot Key: 'S' or 's' to start the EFI Shell
Selected boot option: Tape
Loading.: Tape
Executing Image: UNKNOWN
Optional Data : NONE
Starting: Tape
(C) Copyright 1999-2006 Hewlett-Packard Development Company, L.P.
All rights reserved
HP-UX Boot Loader for IPF -- Revision 2.035
Booting from Tape
Press Any Key to interrupt Autoboot
AUTO ==> boot IINSTALL
Seconds left till autoboot - 2
Type 'help' for help
HPUX> exit
Exiting bootloader.
EFI Boot Manager ver 1.10 [14.61] Please select a boot option
OS might use only the primary console set via boot manager or conconfig command
HP-UX Primary Boot: 0/0/1/1/0.0.0
LAN [Acpi(HWP0002,PNP0A03,4)/Pci(1|0)/Mac(0018FE2DBECF)]
LAN [Acpi(HWP0002,PNP0A03,9)/Pci(1|0)/Mac(001A4B082AC6)]
LAN [Acpi(HWP0002,PNP0A03,9)/Pci(1|1)/Mac(001A4B082AC7)]
EFI Shell [Built-in]
LAN [Acpi(HWP0002,PNP0A03,2)/Pci(1|0)/Mac(0018FE2DBD59)]
Tape
DVD
Boot Option Maintenance Menu
Use ^ and v to change option(s). Use Enter to select an option
Use > and < to view long descriptions
Hot Key: 'S' or 's' to start the EFI Shell
Selected boot option: Tape
Loading.: Tape
Executing Image: UNKNOWN
Optional Data : NONE
Starting: Tape
(C) Copyright 1999-2006 Hewlett-Packard Development Company, L.P.
All rights reserved
HP-UX Boot Loader for IPF -- Revision 2.035
Booting from Tape
Press Any Key to interrupt Autoboot
AUTO ==> boot IINSTALL
Seconds left till autoboot - 0
AUTOBOOTING...> System Memory = 65273 MB
loading section 0
....................................................................... (complet
e)
loading section 1
................ (complete)
loading symbol table
loading ram disk file (IINSTALLFS).
................................................................................
......
(complete)
Launching IINSTALL
SIZE: Text:36209K + Data:8027K + BSS:8579K = Total:52816K
Console is on a Serial Device
Booting kernel...
Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 65273 MB 65273 MB 65273 MB
Kernel : 65273 MB 65273 MB 65273 MB
User : 61984 MB 54022 MB 54234 MB
-------------------------------------------------------------------------
Loaded ACPI revision 2.0 tables.
krs_read_mfs: Error 5 opening MFS.
WARNING: GIO: read_ioconfig_file(): /stand/ioconfig read error.
ioconfig = NULL
NOTICE: cachefs_link(): File system was registered at index 5.
NOTICE: nfs3_link(): File system was registered at index 8.
System Console is on the Built-In Serial Interface
iether4: INITIALIZING HP A7011-60001 PCI/PCI-X 1000Base-SX Dual-port Adapter at
hardware path 2/0/2/1/0
iether6: INITIALIZING HP AD331-60001 PCI/PCI-X 1000Base-T Adapter at hardware pa
th 2/0/4/1/0
iether7: INITIALIZING HP A7011-60001 PCI/PCI-X 1000Base-SX Dual-port Adapter at
hardware path 2/0/8/1/0
iether8: INITIALIZING HP A7011-60001 PCI/PCI-X 1000Base-SX Dual-port Adapter at
hardware path 2/0/8/1/1
iether9: INITIALIZING HP A7011-60001 PCI/PCI-X 1000Base-SX Dual-port Adapter at
hardware path 2/0/9/1/0
iether10: INITIALIZING HP A7011-60001 PCI/PCI-X 1000Base-SX Dual-port Adapter at
hardware path 2/0/9/1/1
iether11: INITIALIZING HP AD331-60001 PCI/PCI-X 1000Base-T Adapter at hardware p
ath 2/0/13/1/0
iether0: INITIALIZING HP AD331-60001 PCI/PCI-X 1000Base-T Adapter at hardware pa
th 0/0/2/1/0
iether5: INITIALIZING HP A7011-60001 PCI/PCI-X 1000Base-SX Dual-port Adapter at
hardware path 2/0/2/1/1
iether1: INITIALIZING HP AD331-60001 PCI/PCI-X 1000Base-T Adapter at hardware pa
th 0/0/4/1/0
iether2: INITIALIZING HP A7011-60001 PCI/PCI-X 1000Base-SX Dual-port Adapter at
hardware path 0/0/9/1/0
iether3: INITIALIZING HP A7011-60001 PCI/PCI-X 1000Base-SX Dual-port Adapter at
hardware path 0/0/9/1/1
Swap device table: (start & size given in 512-byte blocks)
entry 0 - auto-configured on root device; ignored - no room
WARNING: no swap device configured, so dump cannot be defaulted to primary swap.
WARNING: No dump devices are configured. Dump is disabled.
Starting the STREAMS daemons-phase 1
sh: pre_init_rc: not found
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: B11.23_LR FLAVOR=perf Fri Aug 29 22:35:38 PDT 2003 $
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 66840424 Kbytes, lockable: 50922664 Kbytes, available: 59123492 Kb
ytes
* Preparing to execute init...
======= 06/15/10 04:46:17 EDT HP-UX Installation Initialization. (Tue Jun 15
04:46:17 EDT 2010)
@(#)Ignite-UX Revision C.7.4.155
@(#)ignite/launch (opt) Revision:
/branches/IUX_RA0712/ignite/src@71931 Last Modified: 2007-10-15
15:53:11 -0600 (Mon, 15 Oct 2007)
* Configuring RAM filesystems...
* Scanning system for IO devices...
* Boot device is: 0/0/8/1/1.3.0
Recovery tape created from system: hpux01 on Tue May 25 12:41:20 2010
WARNING: The configuration information calls for a non-interactive
installation.
Press within 10 seconds to cancel batch-mode installatio
n:
* Using client directory: /var/opt/ignite/clients/0x0018FE2DBD59
* Checking configuration for consistency...
NOTE: Dump space (20971520KB) is less than 50% of system memory
(66840424KB). There is a possibility that the system dump will be
truncated with a failure to capture important system information in
the event of a system crash. You can increase the size of the dump
volumes or add additional dump volumes on the "File System" tab when
using the advanced user interface. See crashconf(1M) for more
information.
WARNING: Free space (16215520KB) in "/var" where /var/adm/crash is located is
less than 25% of system memory (66840424KB). This will likely result
in an inability to capture a single selective compressed dump in the
event of a system crash. Additional space will be required to
uncompress the dump in order to analyze it and to save multiple dumps.
You can increase the size of the "/var" volume on the "File System"
tab when using the advanced user interface.
WARNING: The disk at: 0/0/1/1/0.0.0 (COMPAQ_BF14684970) appears to contain a
file system and boot area. Continuing the installation will destroy
any existing data on this disk.
Press within 10 seconds to cancel batch-mode installatio
n:
* Continuing despite above warnings.
* Attempting a non-interactive installation.
* Loading configuration utility...
* Beginning installation from source: /dev/rmt/c3t3d0BEST
======= 06/15/10 04:50:06 EDT Starting system configuration...
* Configure_Disks: Begin
* Mapping LUN Instance Data
* Will install B.11.23 onto this system.
* Creating LVM physical volume "/dev/rdsk/c0t0d0s2" (0/0/1/1/0.0.0).
* Creating volume group "vg00".
* Creating logical volume "vg00/lvol1" (/stand).
* Creating logical volume "vg00/lvol2" (swap_dump).
* Creating logical volume "vg00/lvol3" (/).
* Creating logical volume "vg00/lvol4" (/opt).
* Creating logical volume "vg00/lvol5" (/tmp).
* Creating logical volume "vg00/lvol6" (/usr).
* Creating logical volume "vg00/lvol7" (/var).
* Creating logical volume "vg00/lvol8" (/home).
* Creating logical volume "vg00/oracle" (/u01).
* Extending logical volume "vg00/lvol1" (/stand).
* Extending logical volume "vg00/lvol2" (swap_dump).
* Extending logical volume "vg00/lvol3" (/).
* Extending logical volume "vg00/lvol4" (/opt).
* Extending logical volume "vg00/lvol5" (/tmp).
* Extending logical volume "vg00/lvol6" (/usr).
* Extending logical volume "vg00/lvol7" (/var).
* Extending logical volume "vg00/lvol8" (/home).
* Extending logical volume "vg00/oracle" (/u01).
* Making HFS filesystem for "/stand", (/dev/vg00/rlvol1).
* Making VxFS filesystem for "/", (/dev/vg00/rlvol3).
* Making VxFS filesystem for "/opt", (/dev/vg00/rlvol4).
* Making VxFS filesystem for "/tmp", (/dev/vg00/rlvol5).
* Making VxFS filesystem for "/usr", (/dev/vg00/rlvol6).
* Making VxFS filesystem for "/var", (/dev/vg00/rlvol7).
* Making VxFS filesystem for "/home", (/dev/vg00/rlvol8).
* Making VxFS filesystem for "/u01", (/dev/vg00/roracle).
* Setting rotational delay to 0 for "/stand".
* Configure_Disks: Complete
* Download_mini-system: Begin
x ./usr/sbin/idisk, 85596 bytes, 168 tape blocks
x ./sbin/fs/hfs/mkfs, 586996 bytes, 1147 tape blocks
x ./sbin/fs/hfs/newfs, 461420 bytes, 902 tape blocks
x ./sbin/fs/vxfs/mkfs, 1966500 bytes, 3841 tape blocks
x ./sbin/fs/vxfs/newfs, 461988 bytes, 903 tape blocks
x ./sbin/fs/vxfs5.0/mkfs, 3147180 bytes, 6147 tape blocks
x ./sbin/fs/vxfs5.0/newfs, 1704600 bytes, 3330 tape blocks
x ./sbin/mkfs symbolic link to /sbin/fs_wrapper
x ./sbin/newfs symbolic link to /sbin/fs_wrapper
x ./sbin/lib/mfsconfig.d/hfs, 1053 bytes, 3 tape blocks
x ./sbin/lib/mfsconfig.d/vxfs5.0, 3040 bytes, 6 tape blocks
x ./sbin/fs_wrapper, 488324 bytes, 954 tape blocks
x ./sbin/sh, 993868 bytes, 1942 tape blocks
x ./usr/sbin/tunefs, 33756 bytes, 66 tape blocks
x ./sbin/extendfs symbolic link to /sbin/fs_wrapper
x ./sbin/fs/vxfs5.0/extendfs, 3038024 bytes, 5934 tape blocks
x ./sbin/lvchange, 2171932 bytes, 4243 tape blocks
./sbin/lvcreate linked to ./sbin/lvchange
./sbin/lvdisplay linked to ./sbin/lvchange
./sbin/lvextend linked to ./sbin/lvchange
./sbin/lvlnboot linked to ./sbin/lvchange
./sbin/lvreduce linked to ./sbin/lvchange
./sbin/lvremove linked to ./sbin/lvchange
./sbin/lvrmboot linked to ./sbin/lvchange
./sbin/pvchange linked to ./sbin/lvchange
./sbin/pvcreate linked to ./sbin/lvchange
./sbin/pvdisplay linked to ./sbin/lvchange
./sbin/pvmove linked to ./sbin/lvchange
./sbin/vgcfgbackup linked to ./sbin/lvchange
./sbin/vgcfgrestore linked to ./sbin/lvchange
./sbin/vgchange linked to ./sbin/lvchange
./sbin/vgcreate linked to ./sbin/lvchange
./sbin/vgdisplay linked to ./sbin/lvchange
./sbin/vgexport linked to ./sbin/lvchange
./sbin/vgextend linked to ./sbin/lvchange
./sbin/vgimport linked to ./sbin/lvchange
./sbin/vgreduce linked to ./sbin/lvchange
./sbin/vgremove linked to ./sbin/lvchange
./sbin/vgscan linked to ./sbin/lvchange
./sbin/pvck linked to ./sbin/lvchange
x ./usr/lib/uxbootlf, 707584 bytes, 1382 tape blocks
x ./usr/lib/efi/EFI/HPUX/hpux.efi, 645215 bytes, 1261 tape blocks
x ./usr/lib/efi/EFI/HPUX/nbp.efi, 24576 bytes, 48 tape blocks
x ./usr/lib/efi/EFI/Intel_Firmware/fpswa.efi, 328192 bytes, 641 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/README.network, 799 bytes, 2 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/ftp.efi, 542208 bytes, 1059 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/ifconfig.efi, 392704 bytes, 767 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/inet.nsh, 962 bytes, 2 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/ping.efi, 383488 bytes, 749 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/route.efi, 394752 bytes, 771 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/tcpipv4.efi, 601088 bytes, 1174 tape blocks
x ./usr/lib/efi/startup.nsh, 296 bytes, 1 tape blocks
x ./usr/lib/libdld.1, 12288 bytes, 24 tape blocks
x ./usr/lib/libdld.2, 20480 bytes, 40 tape blocks
x ./usr/lib/libdld.sl symbolic link to ./libdld.2
x ./usr/lib/libelf.2, 102400 bytes, 200 tape blocks
x ./usr/lib/hpux32/aries32.so, 2110540 bytes, 4123 tape blocks
x ./usr/lib/hpux32/dld.so, 925808 bytes, 1809 tape blocks
x ./usr/lib/hpux32/libCsup.so.1, 353788 bytes, 691 tape blocks
x ./usr/lib/hpux32/libc.so.1, 2662016 bytes, 5200 tape blocks
x ./usr/lib/hpux32/libcl.so symbolic link to ./libcl.so.1
x ./usr/lib/hpux32/libcl.so.1, 5064 bytes, 10 tape blocks
x ./usr/lib/hpux32/libdl.so.1, 76704 bytes, 150 tape blocks
x ./usr/lib/hpux32/libelf.so.1, 163468 bytes, 320 tape blocks
x ./usr/lib/hpux32/libm.so symbolic link to ./libm.so.1
x ./usr/lib/hpux32/libm.so.1, 1487848 bytes, 2906 tape blocks
x ./usr/lib/hpux32/libnss_files.so.1, 98120 bytes, 192 tape blocks
x ./usr/lib/hpux32/libpthread.so.1, 603896 bytes, 1180 tape blocks
x ./usr/lib/hpux32/libsec.so.1, 294924 bytes, 577 tape blocks
x ./usr/lib/hpux32/libsin.so symbolic link to ./libsin.so.1
x ./usr/lib/hpux32/libsin.so.1, 18332 bytes, 36 tape blocks
x ./usr/lib/hpux32/libstd.so.1, 163340 bytes, 320 tape blocks
x ./usr/lib/hpux32/libstd_v2.so.1, 1752524 bytes, 3423 tape blocks
x ./usr/lib/hpux32/libstream.so.1, 388780 bytes, 760 tape blocks
x ./usr/lib/hpux32/libuca.so.1, 34464 bytes, 68 tape blocks
x ./usr/lib/hpux32/libunwind.so.1, 344144 bytes, 673 tape blocks
x ./usr/lib/hpux32/libxcurses.so.1, 531640 bytes, 1039 tape blocks
x ./usr/lib/hpux32/pa_boot32.so, 105836 bytes, 207 tape blocks
x ./usr/lib/hpux32/uld.so, 110700 bytes, 217 tape blocks
x ./usr/lib/hpux32/libnsl.so.1, 1045180 bytes, 2042 tape blocks
x ./usr/lib/hpux32/libnss_dns.so.1, 59784 bytes, 117 tape blocks
x ./usr/lib/hpux32/libxti.so.1, 202140 bytes, 395 tape blocks
x ./usr/lib/hpux32/libdcekt.so symbolic link to ./libdcekt.so.1
x ./usr/lib/hpux32/libdcekt.so.1, 10073940 bytes, 19676 tape blocks
x ./usr/lib/hpux32/libgss.so, 132132 bytes, 259 tape blocks
x ./usr/lib/hpux32/libcom_err.so, 22376 bytes, 44 tape blocks
x ./usr/lib/hpux32/libk5crypto.so, 177872 bytes, 348 tape blocks
x ./usr/lib/hpux32/libkrb5.so, 903932 bytes, 1766 tape blocks
x ./usr/lib/libc.1, 1523712 bytes, 2976 tape blocks
x ./usr/lib/libc.2, 1433600 bytes, 2800 tape blocks
x ./usr/lib/libcurses.1, 155648 bytes, 304 tape blocks
x ./usr/lib/libnss_files.1, 45056 bytes, 88 tape blocks
x ./usr/lib/libpthread.1, 110592 bytes, 216 tape blocks
x ./usr/lib/libsec.2, 163840 bytes, 320 tape blocks
x ./usr/lib/nls/msg/C/dcerpc.cat, 13755 bytes, 27 tape blocks
x ./usr/lib/nls/msg/C/cpp.cat, 11084 bytes, 22 tape blocks
x ./usr/lib/libnsl.1, 630784 bytes, 1232 tape blocks
x ./usr/lib/libnsl.sl symbolic link to ./libnsl.1
x ./usr/lib/libxti.2, 106496 bytes, 208 tape blocks
x ./usr/lib/sw/ui/C/smc_addhost.ui, 2571 bytes, 6 tape blocks
x ./usr/lib/sw/ui/C/smc_analyze.ui, 4663 bytes, 10 tape blocks
x ./usr/lib/sw/ui/C/smc_bundles.ui, 1775 bytes, 4 tape blocks
x ./usr/lib/sw/ui/C/smc_chgloc.ui, 3634 bytes, 8 tape blocks
x ./usr/lib/sw/ui/C/smc_defs.h, 24742 bytes, 49 tape blocks
x ./usr/lib/sw/ui/C/smc_depend.ui, 2824 bytes, 6 tape blocks
x ./usr/lib/sw/ui/C/smc_details.ui, 3990 bytes, 8 tape blocks
x ./usr/lib/sw/ui/C/smc_dsa.ui, 8100 bytes, 16 tape blocks
x ./usr/lib/sw/ui/C/smc_init.ui, 708 bytes, 2 tape blocks
x ./usr/lib/sw/ui/C/smc_install.ui, 4018 bytes, 8 tape blocks
x ./usr/lib/sw/ui/C/smc_jobopts.ui, 116062 bytes, 227 tape blocks
x ./usr/lib/sw/ui/C/smc_jobs.ui, 20222 bytes, 40 tape blocks
x ./usr/lib/sw/ui/C/smc_list.ui, 1962 bytes, 4 tape blocks
x ./usr/lib/sw/ui/C/smc_menudefs.h, 1792 bytes, 4 tape blocks
x ./usr/lib/sw/ui/C/smc_options.ui, 5889 bytes, 12 tape blocks
x ./usr/lib/sw/ui/C/smc_patch.ui, 2527 bytes, 5 tape blocks
x ./usr/lib/sw/ui/C/smc_remove.ui, 3289 bytes, 7 tape blocks
x ./usr/lib/sw/ui/C/smc_rmsourc.ui, 2411 bytes, 5 tape blocks
x ./usr/lib/sw/ui/C/smc_sched.ui, 4591 bytes, 9 tape blocks
x ./usr/lib/sw/ui/C/smc_selalt.ui, 2804 bytes, 6 tape blocks
x ./usr/lib/sw/ui/C/smc_seldpt.ui, 2404 bytes, 5 tape blocks
x ./usr/lib/sw/ui/C/smc_session.ui, 2180 bytes, 5 tape blocks
x ./usr/lib/sw/ui/C/smc_softinf.ui, 5653 bytes, 12 tape blocks
x ./usr/lib/sw/ui/C/smc_softwar.ui, 18847 bytes, 37 tape blocks
x ./usr/lib/sw/ui/C/smc_source.ui, 4902 bytes, 10 tape blocks
x ./usr/lib/sw/ui/C/smc_targets.ui, 12190 bytes, 24 tape blocks
x ./usr/lib/sw/ui/C/smc_task.ui, 5805 bytes, 12 tape blocks
x ./usr/lib/sw/help/C/sduhelp.hv, 28436 bytes, 56 tape blocks
x ./usr/lib/sw/help/C/sduhelp.hvk, 5145 bytes, 11 tape blocks
x ./usr/lib/sw/help/C/sduhelp00.ht, 215428 bytes, 421 tape blocks
x ./usr/lib/sw/help/C/sduhelp01.ht, 14210 bytes, 28 tape blocks
x ./usr/lib/libM.1 symbolic link to ./libm.1
x ./usr/lib/libm.1, 98773 bytes, 193 tape blocks
x ./usr/lib/libm.2, 188416 bytes, 368 tape blocks
x ./usr/lib/libcma.1, 466944 bytes, 912 tape blocks
x ./usr/lib/libcma.2, 487424 bytes, 952 tape blocks
x ./usr/lib/libcma.sl symbolic link to ./libcma.2
x ./usr/lib/libd4r.1, 45056 bytes, 88 tape blocks
x ./usr/lib/libd4r.sl symbolic link to ./libd4r.1
x ./usr/lib/libdce.1, 4235264 bytes, 8272 tape blocks
x ./usr/lib/libdce.2, 4313088 bytes, 8424 tape blocks
x ./usr/lib/libdce.sl symbolic link to ./libdce.2
x ./usr/lib/libdcekt.1, 4620288 bytes, 9024 tape blocks
x ./usr/lib/dld.sl, 274432 bytes, 536 tape blocks
x ./usr/lib/libsmapi.so.2, 130108 bytes, 255 tape blocks
x ./usr/bin/lifcp, 80180 bytes, 157 tape blocks
x ./usr/bin/lifls, 40916 bytes, 80 tape blocks
x ./usr/bin/lifrm, 40708 bytes, 80 tape blocks
x ./usr/bin/getopts, 162 bytes, 1 tape blocks
x ./usr/bin/basename, 9936 bytes, 20 tape blocks
x ./usr/bin/chgrp, 35596 bytes, 70 tape blocks
x ./usr/bin/cmp, 23040 bytes, 45 tape blocks
x ./usr/bin/cp, 59112 bytes, 116 tape blocks
x ./usr/bin/cut, 23304 bytes, 46 tape blocks
x ./usr/bin/dd, 32876 bytes, 65 tape blocks
x ./usr/bin/dirname, 5772 bytes, 12 tape blocks
x ./usr/bin/egrep, 44548 bytes, 88 tape blocks
x ./usr/bin/expr, 35612 bytes, 70 tape blocks
x ./usr/bin/false, 5660 bytes, 12 tape blocks
./usr/bin/fgrep linked to ./usr/bin/egrep
x ./usr/bin/grep, 44572 bytes, 88 tape blocks
x ./usr/bin/hostname, 5956 bytes, 12 tape blocks
x ./usr/bin/kill, 10836 bytes, 22 tape blocks
x ./usr/bin/ln, 19192 bytes, 38 tape blocks
x ./usr/bin/model, 18084 bytes, 36 tape blocks
x ./usr/bin/ps, 85080 bytes, 167 tape blocks
x ./usr/bin/pwd, 10072 bytes, 20 tape blocks
x ./usr/bin/rm, 66100 bytes, 130 tape blocks
./usr/bin/rmdir linked to ./usr/bin/rm
x ./usr/bin/sed, 86604 bytes, 170 tape blocks
x ./usr/bin/sort, 109064 bytes, 214 tape blocks
x ./usr/bin/tar, 107380 bytes, 210 tape blocks
x ./usr/bin/touch, 18988 bytes, 38 tape blocks
x ./usr/bin/true, 5660 bytes, 12 tape blocks
x ./usr/bin/wc, 14736 bytes, 29 tape blocks
x ./usr/bin/compress, 45196 bytes, 89 tape blocks
x ./usr/bin/ed, 135024 bytes, 264 tape blocks
x ./usr/bin/find, 134380 bytes, 263 tape blocks
x ./usr/bin/getopt, 10196 bytes, 20 tape blocks
x ./usr/bin/id, 14744 bytes, 29 tape blocks
x ./usr/bin/more, 165148 bytes, 323 tape blocks
x ./usr/bin/tail, 45452 bytes, 89 tape blocks
./usr/bin/uncompress linked to ./usr/bin/compress
./usr/bin/zcat linked to ./usr/bin/compress
x ./usr/bin/bdf, 49348 bytes, 97 tape blocks
x ./usr/bin/diff, 88180 bytes, 173 tape blocks
x ./usr/bin/mt, 24660 bytes, 49 tape blocks
x ./usr/bin/ftp, 257816 bytes, 504 tape blocks
x ./usr/bin/rcp, 125288 bytes, 245 tape blocks
x ./usr/bin/remsh, 85648 bytes, 168 tape blocks
x ./usr/bin/ex, 553824 bytes, 1082 tape blocks
./usr/bin/vi linked to ./usr/bin/ex
x ./usr/bin/uname, 417140 bytes, 815 tape blocks
x ./usr/lbin/sysadm/create_sysfile, 49776 bytes, 98 tape blocks
x ./usr/lbin/sysadm/check_dlkm_module, 4187 bytes, 9 tape blocks
x ./usr/lbin/sysadm/system_prep, 10000 bytes, 20 tape blocks
x ./usr/lbin/fs/vxfs5.0/vxdump, 507896 bytes, 992 tape blocks
x ./usr/lbin/fs/vxfs5.0/vxrestore, 556952 bytes, 1088 tape blocks
x ./usr/lbin/sw/control_utils, 155389 bytes, 304 tape blocks
x ./usr/lbin/swagent, 2760220 bytes, 5392 tape blocks
x ./usr/lbin/krs_file_reader, 18228 bytes, 36 tape blocks
x ./usr/lbin/krs_print, 22796 bytes, 45 tape blocks
x ./usr/sbin/kconfig, 595612 bytes, 1164 tape blocks
x ./usr/sbin/mk_kernel, 2505 bytes, 5 tape blocks
x ./usr/sbin/insf symbolic link to /sbin/mksf
x ./usr/sbin/ioinit symbolic link to /sbin/ioinit
x ./usr/sbin/ioscan symbolic link to /sbin/ioscan
x ./usr/sbin/mknod symbolic link to /sbin/mknod
x ./usr/sbin/mount symbolic link to /sbin/mount
x ./usr/sbin/reboot symbolic link to /sbin/reboot
x ./usr/sbin/umount symbolic link to /sbin/umount
x ./usr/sbin/devnm, 22652 bytes, 45 tape blocks
x ./usr/sbin/diskinfo, 46800 bytes, 92 tape blocks
x ./usr/sbin/setboot, 55528 bytes, 109 tape blocks
x ./usr/sbin/swapon, 64428 bytes, 126 tape blocks
x ./usr/sbin/chroot, 5928 bytes, 12 tape blocks
x ./usr/sbin/efi_cp, 167312 bytes, 327 tape blocks
x ./usr/sbin/efi_fsinit, 106352 bytes, 208 tape blocks
x ./usr/sbin/efi_ls, 119648 bytes, 234 tape blocks
x ./usr/sbin/efi_mkdir, 148368 bytes, 290 tape blocks
x ./usr/sbin/efi_rm, 119176 bytes, 233 tape blocks
x ./usr/sbin/efi_rmdir, 115160 bytes, 225 tape blocks
x ./usr/sbin/rvxdump symbolic link to /usr/lbin/fs/vxfs/vxdump
x ./usr/sbin/rvxrestore symbolic link to /usr/lbin/fs/vxfs/vxrestore
x ./usr/sbin/vxdump symbolic link to /usr/lbin/fs/vxfs/vxdump
x ./usr/sbin/vxrestore symbolic link to /usr/lbin/fs/vxfs/vxrestore
x ./usr/sbin/swagentd, 998884 bytes, 1951 tape blocks
x ./usr/sbin/swacl, 3709172 bytes, 7245 tape blocks
./usr/sbin/swconfig linked to ./usr/sbin/swacl
./usr/sbin/swcopy linked to ./usr/sbin/swacl
./usr/sbin/swinstall linked to ./usr/sbin/swacl
./usr/sbin/swlist linked to ./usr/sbin/swacl
x ./usr/sbin/swmodify, 2060644 bytes, 4025 tape blocks
./usr/sbin/swpackage linked to ./usr/sbin/swmodify
./usr/sbin/swreg linked to ./usr/sbin/swacl
./usr/sbin/swremove linked to ./usr/sbin/swacl
./usr/sbin/swverify linked to ./usr/sbin/swacl
x ./usr/share/lib/terminfo/h/hp, 1448 bytes, 3 tape blocks
x ./usr/share/lib/terminfo/v/vt100, 1358 bytes, 3 tape blocks
x ./usr/share/lib/terminfo/w/wy60, 1673 bytes, 4 tape blocks
x ./usr/conf/gen/templates/generic, 551 bytes, 2 tape blocks
x ./usr/ccs/lbin/cpp, 223496 bytes, 437 tape blocks
x ./usr/obam/lbin/gethelp, 1245184 bytes, 2432 tape blocks
x ./usr/obam/lbin/ui_exec, 26708 bytes, 53 tape blocks
x ./usr/obam/lib/libIDMawrt.1, 2682880 bytes, 5240 tape blocks
x ./usr/obam/lib/libIDMawrt.sl symbolic link to ./libIDMawrt.1
x ./usr/obam/lib/libobam.1, 1040384 bytes, 2032 tape blocks
x ./usr/obam/lib/libobam.sl symbolic link to ./libobam.1
x ./usr/obam/lib/obam_aw.dmb, 35252 bytes, 69 tape blocks
x ./usr/obam/lib/libIDMawrt.so.1, 4662844 bytes, 9108 tape blocks
x ./usr/obam/lib/libobam.so symbolic link to ./libobam.so.1
x ./usr/obam/lib/libobam.so.1, 1705060 bytes, 3331 tape blocks
x ./usr/obam/lib/obam_aw_ia.dmb, 35899 bytes, 71 tape blocks
x ./usr/obam/lib/help/C/ui/ui.sdl, 80960 bytes, 159 tape blocks
x ./usr/contrib/bin/gunzip, 188504 bytes, 369 tape blocks
./usr/contrib/bin/gzip linked to ./usr/contrib/bin/gunzip
x ./sbin/fs/cdfs/umount symbolic link to /sbin/fs/hfs/umount
x ./sbin/fs/cdfs/mount, 468396 bytes, 915 tape blocks
x ./sbin/fs/hfs/fsck, 678828 bytes, 1326 tape blocks
x ./sbin/fs/hfs/mount, 477108 bytes, 932 tape blocks
x ./sbin/fs/hfs/umount, 413860 bytes, 809 tape blocks
x ./sbin/fs/vxfs/fsck, 2257044 bytes, 4409 tape blocks
x ./sbin/fs/vxfs/mount, 1883892 bytes, 3680 tape blocks
x ./sbin/fs/vxfs/umount symbolic link to /sbin/fs/hfs/umount
x ./sbin/fs/vxfs/subtype, 1679784 bytes, 3281 tape blocks
x ./sbin/fs/vxfs5.0/fsck, 3319760 bytes, 6484 tape blocks
x ./sbin/fs/vxfs5.0/fstyp, 1659404 bytes, 3242 tape blocks
x ./sbin/fs/vxfs5.0/mount, 3075572 bytes, 6007 tape blocks
x ./sbin/fs/vxfs5.0/umount symbolic link to /sbin/fs/vxfs/umount
x ./sbin/fsck symbolic link to /sbin/fs_wrapper
x ./sbin/awk, 887040 bytes, 1733 tape blocks
x ./sbin/cat, 439060 bytes, 858 tape blocks
x ./sbin/chmod, 480180 bytes, 938 tape blocks
x ./sbin/chown, 500708 bytes, 978 tape blocks
x ./sbin/date, 538332 bytes, 1052 tape blocks
x ./sbin/frecover, 697848 bytes, 1363 tape blocks
x ./sbin/init, 1226836 bytes, 2397 tape blocks
x ./sbin/insf, 950596 bytes, 1857 tape blocks
x ./sbin/ioinit, 508652 bytes, 994 tape blocks
x ./sbin/ioscan, 589124 bytes, 1151 tape blocks
x ./sbin/krsd, 498588 bytes, 974 tape blocks
x ./sbin/ls, 571348 bytes, 1116 tape blocks
x ./sbin/mkboot, 624596 bytes, 1220 tape blocks
x ./sbin/mkdir, 434724 bytes, 850 tape blocks
x ./sbin/mknod, 413900 bytes, 809 tape blocks
x ./sbin/mount, 622892 bytes, 1217 tape blocks
x ./sbin/mv, 477060 bytes, 932 tape blocks
x ./sbin/pax, 821020 bytes, 1604 tape blocks
x ./sbin/reboot, 550940 bytes, 1077 tape blocks
x ./sbin/stty, 440676 bytes, 861 tape blocks
x ./sbin/umount, 518396 bytes, 1013 tape blocks
x ./sbin/restore, 638284 bytes, 1247 tape blocks
x ./dev/config, 0 bytes, 0 blocks, character device
x ./dev/null, 0 bytes, 0 blocks, character device
x ./dev/console, 0 bytes, 0 blocks, character device
x ./dev/kmem, 0 bytes, 0 blocks, character device
x ./dev/mem, 0 bytes, 0 blocks, character device
x ./dev/rroot, 0 bytes, 0 blocks, character device
x ./dev/root, 0 bytes, 0 blocks, character device
x ./dev/tty, 0 bytes, 0 blocks, character device
x ./dev/syscon, 0 bytes, 0 blocks, character device
x ./dev/systty, 0 bytes, 0 blocks, character device
x ./tmp/set_locale, 3305 bytes, 7 tape blocks
x ./var/adm/sw/security/_ACL, 40 bytes, 1 tape blocks
x ./var/adm/sw/security/_OWNER, 62 bytes, 1 tape blocks
x ./var/adm/sw/security/_PROD_DFLT_ACL, 55 bytes, 1 tape blocks
x ./var/adm/sw/security/_SOC_DFLT_ACL, 55 bytes, 1 tape blocks
x ./var/adm/sw/security/secrets, 15 bytes, 1 tape blocks
x ./var/adm/sw/defaults, 1383 bytes, 3 tape blocks
x ./var/opt/ignite/local/manifest/template.def, 14388 bytes, 29 tape blocks
x ./opt/ignite/share/man/man1m.Z/print_manifest.1m, 1428 bytes, 3 tape blocks
x ./opt/ignite/binia/print_manifest, 92392 bytes, 181 tape blocks
x ./opt/ignite/bin symbolic link to /opt/ignite/binia
x ./etc/group, 184 bytes, 1 tape blocks
x ./etc/passwd, 332 bytes, 1 tape blocks
x ./etc/magic, 9013 bytes, 18 tape blocks
x ./etc/nfssec.conf, 1212 bytes, 3 tape blocks
x ./etc/hosts, 485 bytes, 1 tape blocks
x ./etc/services, 11545 bytes, 23 tape blocks
x ./etc/inetsvcs.conf, 15 bytes, 1 tape blocks
x ./etc/nsswitch.conf, 382 bytes, 1 tape blocks
x ./configure3, 2318760 bytes, 4529 tape blocks
x ./monitor_bpr, 130556 bytes, 255 tape blocks
* Download_mini-system: Complete
* Loading_software: Begin
* Installing boot area on disk.
* Formatting HP Service Partition.
* Enabling swap areas.
* Backing up LVM configuration for "vg00".
* Processing the archive source (Recovery Archive).
* Tue Jun 15 04:56:26 EDT 2010: Starting archive load of the source
(Recovery Archive).
* Positioning the tape (/dev/rmt/c3t3d0BESTn).
* Looking for Archive...
* Found the Archive Position. Now load the Archive.
* Archive extraction from tape is beginning. Please wait.
碰到的問題:
1 在小機的控制檯上使用終端時，遇到字元亂碼的問題，更改終端型別為vt120即可．
附錄 2:
在有問題的節點上：
hpux01#[/stand]cmviewcl -v
cmviewcl: Cannot view the cluster configuration: No such file or directory.
Either this node is not configured in a cluster, user doesn't have
access to view the cluster configuration, or there is some obstacle
to viewing the configuration. Check the syslog file for more information.
For a list of possible causes, see the Serviceguard manual for cmviewcl.
You have mail in /var/mail/root
hpux01#[/stand]cmhaltnode -f -v hpux01
cmhaltnode : Unable to connect to the local cluster: No such file or directory.
Either no cluster configuration file exists, the file is corrupted,
cmclconfd is unable to run, or user root on node hpux01
doesn't have access to view the configuration.
You have mail in /var/mail/root
hpux01#[/stand]cmgetconf
cmgetconf: Unable to get local cluster configuration information: No such file or directory.
Either cluster is not configured, or the user doesn't
have access to get the cluster configuration.
You have mail in /var/mail/root
在另一個正常的節點上：
hpux02#[/]cmhaltnode -f -v hpux01
Node hpux01 is already halted.
Successfully halted all nodes specified.
這裡雖然停止了節點1上的SG,但狀態仍顯示為up,原因可能是狀態資訊傳遞不過來.
hpux02#[/]cmviewcl -v
CLUSTER STATUS
cluster1 up
NODE STATUS STATE
hpux01 up running
Cluster_Lock_LVM:
VOLUME_GROUP PHYSICAL_VOLUME STATUS
/dev/vglock /dev/dsk/c23t4d6 unknown
Network_Parameters:
INTERFACE STATUS PATH NAME
PRIMARY unknown 0/0/2/1/0 lan0
PRIMARY unknown 2/0/8/1/0 lan7
STANDBY unknown
2/0/9/1/0 lan9
NODE STATUS STATE
hpux02 up running
Cluster_Lock_LVM:
VOLUME_GROUP PHYSICAL_VOLUME STATUS
/dev/vglock /dev/dsk/c23t4d6 up
Network_Parameters:
INTERFACE STATUS PATH NAME
PRIMARY up 0/0/2/1/0 lan0
PRIMARY up 2/0/8/1/0 lan7
STANDBY up 2/0/9/1/0 lan9
配置檔案資訊 getconf
# **********************************************************************
# ********* HIGH AVAILABILITY CLUSTER CONFIGURATION FILE ***************
# ***** For complete details about cluster parameters and how to *******
# ***** set them, consult the Serviceguard manual. *********************
# **********************************************************************
# Enter a name for this cluster. This name will be used to identify the
# cluster when viewing or manipulating it.
CLUSTER_NAME cluster1
# Cluster Lock Parameters
# The cluster lock is used as a tie-breaker for situations
# in which a running cluster fails, and then two equal-sized
# sub-clusters are both trying to form. a new cluster. The
# cluster lock may be configured using only one of the
# following alternatives on a cluster:
# the lock LUN
# the quorom server
#
#
# Consider the following when configuring a cluster.
# For a two-node cluster, you must use a cluster lock. For
# a cluster of three or four nodes, a cluster lock is strongly
# recommended. For a cluster of more than four nodes, a
# cluster lock is recommended. If you decide to configure
# a lock for a cluster of more than four nodes, it must be
# a quorum server.
# LUN lock disk parameters. Use the CLUSTER_LOCK_LUN parameter
# to define the device on a per node basis. The device may only
# be used for this purpose and by only a single cluster.
#
# Example for a FC storage array cluster disk
# CLUSTER_LOCK_LUN /dev/dsk/c1t2d3s1
# For 11.31 and later versions of HP-UX
# CLUSTER_LOCK_LUN /dev/disk/disk4_p2
# Quorum Server Parameters. Use the QS_HOST, QS_POLLING_INTERVAL,
# and QS_TIMEOUT_EXTENSION parameters to define a quorum server.
# The QS_HOST is the host name or IP address of the system
# that is running the quorum server process. The
# QS_POLLING_INTERVAL (microseconds) is the interval at which
# Serviceguard checks to make sure the quorum server is running.
# The optional QS_TIMEOUT_EXTENSION (microseconds) is used to increase
# the time interval after which the quorum server is marked DOWN.
#
# The default quorum server timeout is calculated from the
# Serviceguard cluster parameters, including NODE_TIMEOUT and
# HEARTBEAT_INTERVAL. If you are experiencing quorum server
# timeouts, you can adjust these parameters, or you can include
# the QS_TIMEOUT_EXTENSION parameter.
#
# The value of QS_TIMEOUT_EXTENSION will directly effect the amount
# of time it takes for cluster reformation in the event of failure.
# For example, if QS_TIMEOUT_EXTENSION is set to 10 seconds, the cluster
# reformation will take 10 seconds longer than if the QS_TIMEOUT_EXTENSION
# was set to 0. This delay applies even if there is no delay in
# contacting the Quorum Server. The recommended value for
# QS_TIMEOUT_EXTENSION is 0, which is used as the default
# and the maximum supported value is 30000000 (5 minutes).
#
# For example, to configure a quorum server running on node
# "qshost" with 120 seconds for the QS_POLLING_INTERVAL and to
# add 2 seconds to the system assigned value for the quorum server
# timeout, enter:
#
# QS_HOST qshost
# QS_POLLING_INTERVAL 120000000
# QS_TIMEOUT_EXTENSION 2000000
FIRST_CLUSTER_LOCK_VG /dev/vglock
# Definition of nodes in the cluster.
# Repeat node definitions as necessary for additional nodes.
# NODE_NAME is the specified nodename in the cluster.
# It must match the hostname and both cannot contain full domain name.
# Each NETWORK_INTERFACE, if configured with IPv4 address,
# must have ONLY one IPv4 address entry with it which could
# be either HEARTBEAT_IP or STATIONARY_IP.
# Each NETWORK_INTERFACE, if configured with IPv6 address(es)
# can have multiple IPv6 address entries(up to a maximum of 2,
# only one IPv6 address entry belonging to site-local scope
# and only one belonging to global scope) which must be all
# STATIONARY_IP. They cannot be HEARTBEAT_IP.
NODE_NAME hpux01
NETWORK_INTERFACE lan0
HEARTBEAT_IP 192.168.1.1
NETWORK_INTERFACE lan7
STATIONARY_IP 10.230.12.18
NETWORK_INTERFACE lan9
# CLUSTER_LOCK_LUN
# Primary Network Interfaces on Bridged Net 1: lan0.
# Warning: There are no standby network interfaces on bridged net 1.
# Primary Network Interfaces on Bridged Net 2: lan7.
NODE_NAME hpux02
NETWORK_INTERFACE lan0
HEARTBEAT_IP 192.168.1.2
NETWORK_INTERFACE lan7
STATIONARY_IP 10.230.12.19
NETWORK_INTERFACE lan9
# CLUSTER_LOCK_LUN
FIRST_CLUSTER_LOCK_PV /dev/dsk/c23t4d6
# Primary Network Interfaces on Bridged Net 1: lan0.
# Warning: There are no standby network interfaces on bridged net 1.
# Primary Network Interfaces on Bridged Net 2: lan7.
# Possible standby Network Interfaces on Bridged Net 2: lan9.
# Cluster Timing Parameters (microseconds).
# The NODE_TIMEOUT parameter defaults to 2000000 (2 seconds).
# This value is recommended for installations in which the highest
# priority is to reform. the cluster as fast as possible in
# case of failure. But this value can sometimes lead to reformations
# caused by short-lived system hangs or network load spikes. If your
# highest priority is to minimize reformations, consider using
# a higher setting. For a significant portion of installations,
# a setting of 5000000 to 8000000 (5 to 8 seconds) is appropriate.
# The maximum value recommended for NODE_TIMEOUT is 30000000
# (30 seconds).
HEARTBEAT_INTERVAL 1000000
NODE_TIMEOUT 2000000
# Configuration/Reconfiguration Timing Parameters (microseconds).
AUTO_START_TIMEOUT 600000000
NETWORK_POLLING_INTERVAL 2000000
# Network Monitor Configuration Parameters.
# The NETWORK_FAILURE_DETECTION parameter determines how LAN card failures are detected.
# If set to INONLY_OR_INOUT, a LAN card will be considered down when its inbound
# message count stops increasing or when both inbound and outbound
# message counts stop increasing.
# If set to INOUT, both the inbound and outbound message counts must
# stop increasing before the card is considered down.
NETWORK_FAILURE_DETECTION INOUT
# Package Configuration Parameters.
# Enter the maximum number of packages which will be configured in the cluster.
# You can not add packages beyond this limit.
# This parameter is required.
MAX_CONFIGURED_PACKAGES 150
# Access Control Policy Parameters.
#
# Three entries set the access control policy for the cluster:
# First line must be USER_NAME, second USER_HOST, and third USER_ROLE.
# Enter a value after each.
#
# 1. USER_NAME can either be ANY_USER, or a maximum of
# 8 login names from the /etc/passwd file on user host.
# The following special characters are NOT supported for USER_NAME
# ' ', '/', '\', '*'
# 2. USER_HOST is where the user can issue Serviceguard commands.
# If using Serviceguard Manager, it is the COM server.
# Choose one of these three values: ANY_SERVICEGUARD_NODE, or
# (any) CLUSTER_MEMBER_NODE, or a specific node. For node,
# use the official hostname from domain name server, and not
# an IP addresses or fully qualified name.
# 3. USER_ROLE must be one of these three values:
# * MONITOR: read-only capabilities for the cluster and packages
# * PACKAGE_ADMIN: MONITOR, plus administrative commands for packages
# in the cluster
# * FULL_ADMIN: MONITOR and PACKAGE_ADMIN plus the administrative
# commands for the cluster.
#
# Access control policy does not set a role for configuration
# capability. To configure, a user must log on to one of the
# cluster's nodes as root (UID=0). Access control
# policy cannot limit root users' access.
#
# MONITOR and FULL_ADMIN can only be set in the cluster configuration file,
# and they apply to the entire cluster. PACKAGE_ADMIN can be set in the
# cluster or a package configuration file. If set in the cluster
# configuration file, PACKAGE_ADMIN applies to all configured packages.
# If set in a package configuration file, PACKAGE_ADMIN applies to that
# package only.
#
# Conflicting or redundant policies will cause an error while applying
# the configuration, and stop the process. The maximum number of access
# policies that can be configured in the cluster is 200.
#
# Example: to configure a role for user john from node noir to
# administer a cluster and all its packages, enter:
# USER_NAME john
# USER_HOST noir
# USER_ROLE FULL_ADMIN
# List of OPS Volume Groups.
# Formerly known as DLM Volume Groups, these volume groups
# will be used by OPS or RAC cluster applications via
# the vgchange -a s command. (Note: the name DLM_VOLUME_GROUP
# is also still supported for compatibility with earlier versions.)
# For example:
# OPS_VOLUME_GROUP /dev/vgdatabase
# OPS_VOLUME_GROUP /dev/vg02
OPS_VOLUME_GROUP /dev/vglock
OPS_VOLUME_GROUP /dev/vg_oradata
OPS_VOLUME_GROUP /dev/vg_cdz
環境: HPUX 11.23 Superdome
HPUX01 為出問題的機器
HPUX02 為正常的機器
HPUX01, HPUX02組成Oracle9i RAC,使用ServerGuide作叢集，沒有使用包．
問題:
1 在/dev/目錄下執行了rm ./* 命令，將/dev、目錄下的所有檔案都刪除了，但是子目錄下的檔案是還在。
2 當前儲存的最新的磁帶備份是在5.25號做的，在此之後做的一些動作
1) 新建了/dev/vg_cdz /dev/vg_ggs/
2) 配置了lan4
3) 做了ServerGuide
可能的方案：
1 能否從磁帶備份裡恢復部分檔案，如何做？
2 已報HP 800電話，請求幫助。
解決的過程：
##########################################################################
HP工程師1的方案：
##########################################################################
1 mt -f /dev/rmt/0mn rew
2 mt -f /dev/rmt/0mn fsf 22
3 tar -xvf /dev/rmt/0mn /dev/
我們的擔心,是這可能會覆蓋原有的目錄檔案,對後面的資料庫VG,ServerGuide造成影響．
所以對這個方案沒有實施
對這個方案我們做了一個測試：
hpux01#[/home/oracle/temp]mt -f /dev/rmt/0mn rew
hpux01#[/home/oracle/temp]mt -f /dev/rmt/0mn fsf 22
hpux01#[/home/oracle/temp]tar -xvf /dev/rmt/0mn dev/ttyq0
dev/ttyq0: cannot link
這裡是恢復不成功的?
hpux01#[/home/oracle/temp]mt -f /dev/rmt/0mn rew
hpux01#[/home/oracle/temp]mt -f /dev/rmt/0mn fsf 22
hpux01#[/home/oracle/temp]tar -xvf /dev/rmt/0mn dev/netlog
x dev/netlog, 0 bytes, 0 blocks, character device
這裡等了很久才退出．超過１個鐘，這是不是因為要讀完整個tape才退出呢？
hpux01#[/home/oracle/temp] ls -l /dev/rmt/0mn dev/netlog
crw-r--r-- 1 bin bin 46 0x000001 Sep 9 2004 netlog
這裡是恢復成功的．
為什麼一個成功，一個不成功呢？不清楚原因
##########################################################################
HP工程師2的方案
##########################################################################
方案1:
1 mt -f /dev/rmt/0mn rew
2 mt -f /dev/rmt/0mn fsf 22
3 mkdir /test
4 pax -rf /dev/rmt/0mn -s/dev/test/p /dev
操作過程
hpux01#[/home/oracle/temp]cd /
hpux01#[/]mkdir test
hpux01#[/]pax -rf /dev/rmt/0mn -s/dev/test/p /dev
pax: The archive is empty.
hpux01#[/]
hpux01#[/]pax -rf /dev/rmt/0mn -s/dev/test/p /dev
pax: [offset 0g+0m+0k+0]: I/O error
pax: Unable to determine the archive format.
hpux01#[/]mt -f /dev/rmt/0mn rew
hpux01#[/] mt -f /dev/rmt/0mn fsf 22
hpux01#[/]pax -rf /dev/rmt/0mn -s/dev/test/p /dev
usr/share/man/man2.Z/pstat_getcrashdev.2 >> usr/share/man/man2.Z/pstat_getcrashtest.2
usr/share/man/man3.Z/fstatvfsdev64.3s >> usr/share/man/man3.Z/fstatvfstest64.3s
usr/share/man/man3.Z/fstatfsdev.3c >> usr/share/man/man3.Z/fstatfstest.3c
usr/share/man/man3.Z/statfsdev.3c >> usr/share/man/man3.Z/statfstest.3c
......(省略了一些log)
dev/rmt/c45t0d1BESTn >> test/rmt/c45t0d1BESTn
dev/rmt/24mn >> test/rmt/24mn
dev/rmt/c45t0d1BESTb >> test/rmt/c45t0d1BESTb
dev/rmt/24mb >> test/rmt/24mb
dev/rmt/c45t0d1BESTnb >> test/rmt/c45t0d1BESTnb
dev/rmt/24mnb >> test/rmt/24mnb
dev/rmt/c44t1d1BEST >> test/rmt/c44t1d1BEST
dev/rmt/25m >> test/rmt/25m
dev/ptym/ptyp0 >> test/ptym/ptyp0
dev/ptyp1 >> test/ptyp1
dev/ptym/ptyp1 >> test/ptym/ptyp1
dev/ptyp2 >> test/ptyp2
dev/ptym/ptyp2 >> test/ptym/ptyp2
dev/ptyp3 >> test/ptyp3
dev/ptym/ptyp3 >> test/ptym/ptyp3
dev/ptyp4 >> test/ptyp4
dev/ptym/ptyp4 >> test/ptym/ptyp4
dev/ptyp5 >> test/ptyp5
dev/ptym/ptyp5 >> test/ptym/ptyp5
dev/ptyp6 >> test/ptyp6
dev/ptym/ptyp6 >> test/ptym/ptyp6
dev/ptyp7 >> test/ptyp7
dev/ptym/ptyp7 >> test/ptym/ptyp7
dev/ptyp8 >> test/ptyp8
dev/ptym/ptyp8 >> test/ptym/ptyp8
dev/ptyp9 >> test/ptyp9
......(省略了一些log)
dev/ttyrd >> test/ttyrd
dev/pty/ttyre >> test/pty/ttyre
dev/ttyre >> test/ttyre
dev/pty/ttyrf >> test/pty/ttyrf
dev/ttyrf >> test/ttyrf
usr/lib/nls/msg/zh_HK.utf8/audevent.cat >> usr/lib/nls/msg/zh_HK.utf8/autestent.cat
usr/lib/nls/msg/zh_TW.utf8/audevent.cat >> usr/lib/nls/msg/zh_TW.utf8/autestent.cat
usr/lib/nls/msg/fr_CA.utf8/audevent.cat >> usr/lib/nls/msg/fr_CA.utf8/autestent.cat
usr/lib/nls/msg/fr_FR.utf8/audevent.cat >> usr/lib/nls/msg/fr_FR.utf8/autestent.cat
usr/lib/nls/msg/fr_CA.iso88591/audevent.cat >> usr/lib/nls/msg/fr_CA.iso88591/autestent.cat
usr/lib/nls/msg/fr_FR.iso88591/audevent.cat >> usr/lib/nls/msg/fr_FR.iso88591/autestent.cat
usr/dt/appconfig/types/fr_CA.iso88591/develop.dt >> usr/dt/appconfig/types/fr_CA.iso88591/testelop.dt
usr/dt/appconfig/types/fr_FR.iso88591/develop.dt >> usr/dt/appconfig/types/fr_FR.iso88591/testelop.dt
pax: /dev not found in archive
You have mail in /var/mail/root
這個做到中間時 報錯/dev not found in archive
同時在/test目錄下並沒有找到任何檔案
方案1失敗.
方案2
1 mt -f /dev/rmt/0mn rew
2 mt -f /dev/rmt/0mn fsf 22
3 tar -xvf /dev/rmt/0mm /dev/(這個沒做)
我們的擔心,是這可能會覆蓋原有的目錄檔案,對後面的資料庫VG,ServerGuide造成影響．
所以對這個方案沒有實施
##########################################################################
我們自己現在做的唯一一個方案：
##########################################################################
cd /u01/vgbackup/temp
mt -f /dev/rmt/0mn rew
mt -f /dev/rmt/0mn fsf 22
pax -s !\/!.\/! -rvf /dev/rmt/0mn
這樣的話所有檔案都恢復到了/u01/vgbackup/temp下面
cd /u01/vgbackup/temp
hpux01[/u01/vgbackup/temp]$ls -l
total 338
-rw-r--r-- 1 root sys 98872 Jan 28 10:38 2
drwxr-xr-x 2 root sys 96 Jun 12 23:41 SD_CDROM.
lr-xr-xr-x 1 root sys 8 Jun 12 23:36 bin -> /usr/bin
drwxr-xr-x 2 root sys 96 Jun 12 23:41 cdrom.
drwxr-xr-x 22 root sys 5120 Jun 12 23:36 dev.
drwxr-xr-x 32 root sys 6144 Jun 12 23:36 etc.
drwxr-xr-x 2 root sys 96 Jun 12 23:35 home.
lr-xr-xr-x 1 root sys 8 Jun 12 23:36 lib -> /usr/lib
drwxr-xr-x 2 root sys 96 Jun 12 23:41 lost+found.
-rw-r--r-- 1 root sys 47200 Aug 31 2009 manifest
-rw-r--r-- 1 root sys 0 Mar 20 2009 mapfile
drwxrwxrwx 2 root sys 96 Jun 12 23:41 mnt.
drwxr-xr-x 2 root sys 96 Jun 12 23:41 net.
-rw------- 1 root sys 41 Jun 10 2009 nohup.out
drwxr-xr-x 90 root sys 2048 Jun 12 23:54 opt.
drwxrwxrwx 2 root sys 96 Jun 12 23:41 oracle.
drwxr-xr-x 15 root sys 4096 Jun 12 23:36 sbin.
drwxr-xr-x 9 root sys 1024 Jun 12 23:33 stand.
drwxr-xr-x 2 root sys 96 Jun 12 23:41 testlv.
drwxrwxrwt 20 root sys 4096 Jun 12 23:42 tmp.
drwxrwxrwx 3 root sys 96 Jun 12 23:35 u01.
drwxr-xr-x 23 root sys 1024 Jun 12 23:59 usr.
drwxr-xr-x 24 root sys 1024 Jun 13 00:08 var.
結果是：檔案是恢復回來了，但檔案的 型別 和 屬主,許可權這些發生了變化
屬主，許可權可以改，但檔案型別卻不好辦了
如：
這是新還原的檔案
hpux01[/u01/vgbackup/temp/dev.]$ls -l ttyq0
-rw-r--r-- 1 root sys 0 Sep 9 2004 ttyq0
這是舊的檔案
hpux02[/dev]$ls -l ttyq0
crw-rw-rw- 2 bin tty 17 0x000010 Sep 9 2004 ttyq0
後來查man才知道
-pe 選項可以retain 許可權相關的資訊
-e Retains the user ID, group ID, access permission,access time, and modification time.
但檔案型別的改變仍然無法解決．
#############################################################################
本來打算的最後嘗試:
1 mt -f /dev/rmt/0mn rew
2 mt -f /dev/rmt/0mn fsf 22
3 tar -xvfp /dev/rmt/0mn /dev/
4 cp /hom/oracle/dev.tar 中的檔案回去覆蓋從磁帶中拷回來的，但沒有被刪除的．
但，tar命令這裡，還要找下引數，保持許可權 -p
tar -xvfp /dev/rmt/0mn /dev/
在跟HPUX的工程師交流下，結論是部分恢復/dev是不行的．只能做基於磁帶的恢復．
#############################################################################
基於磁帶的恢復:
恢復前備份的目錄,把要備份的目錄都直接copy 到 /u01/ggs目錄下(這個ggs所在的vg可以在19上掛載)
1> Oracle相關的目錄:
1 /u01/app/oracle
2 /etc/
3 /opt/galaxy
cd /u01/ggs
mkdir oracle
mkdir etc
mkdir galaxy
cd /u01/app/oracle/
tar -cvf oracle.tar *
cp oracle.tar /u01/ggs/backup/oracle/
mv oracle.tar /tmp/
cd /etc/
tar -cvf etc.tar *
cp etc.tar /u01/ggs/backup/etc/
mv etc.tar /tmp/
cd /opt/galaxy
tar -cvf galaxy.tar *
cp galaxy.tar /u01/ggs/backup/galaxy
mv galaxy.tar /tmp
2> ServerGuide相關的目錄
1 /etc/cmcluster/cmclconf.ascii (已包含在/etc/*下)
3> VG相關的資訊(匯出所有VG的相關資訊)
vgdisplay |grep "VG Name"
vgexport -pvs -m /tmp/vg_cdz.mymap /dev/vg_cdz
vgexport -pvs -m /tmp/vg_oradata.mymap /dev/vg_oradata
vgexport -pvs -m /tmp/vg_arch1.mymap /dev/vg_arch1
vgexport -pvs -m /tmp/vg_arch2.mymap /dev/vg_arch2
vgexport -pvs -m /tmp/vg_ggs.mymap /dev/vg_ggs
vgexport -pvs -m /tmp/vg_arch_cdz1.mymap /dev/vg_arch_cdz1
vgexport -pvs -m /tmp/vg_orabackup.mymap /dev/vg_orabackup
vgexport -pvs -m /tmp/vg00.mymap /dev/vg00
vgexport -pvs -m /tmp/vglock.mymap /dev/vglock
mkdir -p /u01/ggs/backup/map
cp /tmp/*.mymap /u01/ggs/backup/map
4> 網路相關的資訊
/etc/rc.config.d/netconf (已包含在/etc/*下)
最後再透過
找到最近20天有變更的檔案，再備份
find / -type f -mtime -20 > /tmp/new.list
cp /tmp/new.list /u01/ggs/backup/
cd /stand
tar -cvf /u01/ggs/backup/stand.tar *
cd /opt
tar -cvf /u01/ggs/backup/partopt.tar hpsmh/data/htdocs/navfile.htm \
hpsmh/conf/php.ini \
hpsmh/conf/smhpd.conf \
hpsmh/conf/hmmolist.map \
VRTSob/providers/ActionProvider/db/RecipientBroker/0xffffffff.xml \
sfm/conf/fm_diaglogd_cfg.bin \
galaxy/iDataAgent/jobResults/CV_JobResults/reserveFile \
APPQcime/conf/jswwrapper.conf
cd /usr
tar -cvf /u01/ggs/backup/TT_DB.tar TT_DB
cd /var
tar -cvf /u01/ggs/backup/var_opt.tar opt
cd /var
tar -cvf /u01/ggs/backup/var_adm.tar adm
cd /var/
tar -cvf /u01/ggs/backup/part_var.tar sam/log/samlog \
sam/IOPARSER.work \
sam/ug_subareas/users \
sam/IOPARSER.dion \
sam/IOPARSER.iout \
statmon/state \
vx/alloc/attributes.config \
tombstones/cpumap
cd /var
tar -cvf /u01/ggs/backup/var_stm.tar stm
cd /home/oracle
tar -cvf /u01/ggs/backup/home_oracle_sh.tar .profile bin/checksys.sh .Xauthority
做完了
重啟作業系統前要做的事:
關掉資料庫 rnc1, cdzhp1, itsm1,
umount /u01/app/archivelog/cdz2
umount /u01/app/archivelog/cdz1
umount /u01/app/archivelog/rnc2
umount /u01/app/archivelog/rnc1
umount /u01/app/archivelog/itsm2
umount /u01/vgbackup
umount /u01/ggs
把vg_ggs unactive.
vgchange -a n /dev/vg_ggs
vgchange -a n /dev/vg_oradata
vgchange -a n /dev/vg_cdz
vgchange -a n /dev/vg_orabackup
vgchange -a n /dev/vg_arch_cdz1
vgchange -a n /dev/vg_arch1
已做
停止18節點上的SG
cmviewcl -v
cmhaltnode -f -v hpux01
已做
hpux01#[/stand]cmhaltnode -f -v hpux01
cmhaltnode : Unable to connect to the local cluster: No such file or directory.
Either no cluster configuration file exists, the file is corrupted,
cmclconfd is unable to run, or user root on node hpux01
doesn't have access to view the configuration.
You have mail in /var/mail/root
這裡在有問題的節點HPUX01上，停止不了SG，但在另一個節點可以停止．
在另一個正常的節點上：
hpux02#[/]cmhaltnode -f -v hpux01
Node hpux01 is already halted.
Successfully halted all nodes specified.
這裡雖然停止了節點1上的SG,但狀態仍顯示為up,原因可能是狀態資訊傳遞不過來.
關於這個問題，見附錄2.
停止 crontab
已做
修改備份軟體的Media_Agent
已做
重啟做磁帶恢復
磁帶恢復的過程見最後附錄1
已完成
##############################################################################
重配置VG,SG資訊, LAN4,和一些事情，再整理!
在做完基於磁帶的恢復後，如何來還原後面做的一些工作呢?
1 關於VG
hpux01#[/]vgdisplay |grep "VG Name"
vgdisplay: Volume group not activated.
vgdisplay: Cannot display volume group "/dev/vg_oradata".
vgdisplay: Volume group not activated.
vgdisplay: Cannot display volume group "/dev/vglock".
vgdisplay: Volume group not activated.
vgdisplay: Cannot display volume group "/dev/vg_arch2".
vgdisplay: Volume group not activated.
vgdisplay: Cannot display volume group "/dev/vg_ggs".
VG Name /dev/vg00
VG Name /dev/vg_arch1
重新啟用vg_oradata,(新增到叢集中)
vgchange -a y vg_oradata
重導VG_CDZ.
mkdir /dev/vg_cdz
mknod /dev/vg_cdz/group c 64 0x080000
vgimport -s -m /tmp/vg_cdz.mymap /dev/vg_cdz /dev/dsk/c23t1d4 (匯入卷組資訊，)
重導vg_orabackup
mkdir /dev/vg_orabackup
mknod /dev/vg_orabackup/group c 64 0x090000
vgimport -s -m /tmp/vg_orabackup.mymap /dev/vg_backup (匯入卷組資訊，)
重導vg_arch_cdz1
mkdir /dev/vg_arch_cdz1
mknod /dev/vg_arch_cdz1/group c 64 0x0A0000
vgimport -s -m /tmp/vg_arch_cdz1.mymap /dev/vg_arch_cdz1
載入檔案系統
重建vg_arhc_cdz2
pvcreate
mkdir /dev/vg_arch_cdz2
mknod /dev/vg_arch_cdz2/group c 64 0x0B0000
vgimport -s -m /tmp/vg_arch_cdz2.mymap /dev/vg_arch_cdz1
載入檔案系統
2 關於叢集
把節點2上的叢集配置資訊拷回到節點１
重新應用叢集配置資訊
3 關於資料庫
新建的例項，如何來恢復？
直接全部恢復/u01/app/oralce目錄是否可以？？是可以的
直接複製回去,在復回去之前先把現存的放到/tmp下
cd /u01/app/oracle
mv ./* /tmp
scp /u01/ggs/backup/oracle/* ./
不過最後實施的時候，發現其實只要新增幾個檔案即可(這也說明了Oracle新建一個Instance要更改的檔案也就如下幾個)
/u01/app/oracle/product/9i/network/admin/*.ora
/u01/app/oracle/product/9i/dbs/orapw*
/u01/app/oracle/oraInventory/ContentsXML
/u01/app/oracle/admin/cdzhp (目錄)
/u01/app/oracle/product/9i/dbs/initcdzhp1.ora
4 關於網路
lan4,
重新起服務．
hp01、hp02上在lan4網路卡上新增IP10.230.16.4，並設定為不隨機啟動。
備份/etc/rc.config.d/netconf
編輯/etc/rc.config.d/netconf檔案，更改其中的網路卡的IP地址。
INTERFACE_NAME[3]=lan4
IP_ADDRESS[3]=10.230.16.4
SUBNET_MASK[3]=255.255.255.0
INTERFACE_STATE[3]=down
更改後需要執行：
/sbin/init.d/net stop
/sbin/init.d/net start
來重起網路服務
5 其它
5.1 備份軟體，
5.2 Goldengate
載入vg_ggs，重新測試
###############################################################################
結論與經驗教訓：
1 透過磁帶的恢復和後面做的一些重配工作，系統已恢復正常使用．
2 在生產上操作要慢,三思而後行．
3 備份重於一切，但恢復的測試也同樣重要．(否則光備份，遇到需要恢復時沒做過，同樣不會做，平時要找機會測試恢復)
4 RM真的是危險的,請永遠不要使用它．( 在環境變數中用別名代替 alias rm="mv" )
5 在整個事件的解決過程中，跟5個HP工程師有過溝通．感謝他們提供的幫助．
6 武裝自己的技術力量，結交更多的同行，這樣在有問題的時候也可提供幫助．
附錄1：
HPUX 磁帶恢復的大概過程：
進入CM重啟作業系統，執行RS後回到主目錄，再進入CO,才可以看到系統的檢測過程
CM>rs (重啟)
Ctrl +B 返回 Main Menu
進入CO，檢視啟動過程．
在 To discontiune autoboot, press any key to interrupt時，按任意鍵中斷
再選擇透過磁帶啟動．
如下
EFI Boot Manager ver 1.10 [14.61] Please select a boot option
OS might use only the primary console set via boot manager or conconfig command
HP-UX Primary Boot: 0/0/1/1/0.0.0
LAN [Acpi(HWP0002,PNP0A03,4)/Pci(1|0)/Mac(0018FE2DBECF)]
LAN [Acpi(HWP0002,PNP0A03,9)/Pci(1|0)/Mac(001A4B082AC6)]
LAN [Acpi(HWP0002,PNP0A03,9)/Pci(1|1)/Mac(001A4B082AC7)]
EFI Shell [Built-in]
LAN [Acpi(HWP0002,PNP0A03,2)/Pci(1|0)/Mac(0018FE2DBD59)]
Tape
DVD
Boot Option Maintenance Menu
Use ^ and v to change option(s). Use Enter to select an option
Use > and < to view long descriptions
Hot Key: 'S' or 's' to start the EFI Shell
Selected boot option: Tape
Loading.: Tape
Executing Image: UNKNOWN
Optional Data : NONE
Starting: Tape
(C) Copyright 1999-2006 Hewlett-Packard Development Company, L.P.
All rights reserved
HP-UX Boot Loader for IPF -- Revision 2.035
Booting from Tape
Press Any Key to interrupt Autoboot
AUTO ==> boot IINSTALL
Seconds left till autoboot - 2
Type 'help' for help
HPUX> exit
Exiting bootloader.
EFI Boot Manager ver 1.10 [14.61] Please select a boot option
OS might use only the primary console set via boot manager or conconfig command
HP-UX Primary Boot: 0/0/1/1/0.0.0
LAN [Acpi(HWP0002,PNP0A03,4)/Pci(1|0)/Mac(0018FE2DBECF)]
LAN [Acpi(HWP0002,PNP0A03,9)/Pci(1|0)/Mac(001A4B082AC6)]
LAN [Acpi(HWP0002,PNP0A03,9)/Pci(1|1)/Mac(001A4B082AC7)]
EFI Shell [Built-in]
LAN [Acpi(HWP0002,PNP0A03,2)/Pci(1|0)/Mac(0018FE2DBD59)]
Tape
DVD
Boot Option Maintenance Menu
Use ^ and v to change option(s). Use Enter to select an option
Use > and < to view long descriptions
Hot Key: 'S' or 's' to start the EFI Shell
Selected boot option: Tape
Loading.: Tape
Executing Image: UNKNOWN
Optional Data : NONE
Starting: Tape
(C) Copyright 1999-2006 Hewlett-Packard Development Company, L.P.
All rights reserved
HP-UX Boot Loader for IPF -- Revision 2.035
Booting from Tape
Press Any Key to interrupt Autoboot
AUTO ==> boot IINSTALL
Seconds left till autoboot - 0
AUTOBOOTING...> System Memory = 65273 MB
loading section 0
....................................................................... (complet
e)
loading section 1
................ (complete)
loading symbol table
loading ram disk file (IINSTALLFS).
................................................................................
......
(complete)
Launching IINSTALL
SIZE: Text:36209K + Data:8027K + BSS:8579K = Total:52816K
Console is on a Serial Device
Booting kernel...
Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 65273 MB 65273 MB 65273 MB
Kernel : 65273 MB 65273 MB 65273 MB
User : 61984 MB 54022 MB 54234 MB
-------------------------------------------------------------------------
Loaded ACPI revision 2.0 tables.
krs_read_mfs: Error 5 opening MFS.
WARNING: GIO: read_ioconfig_file(): /stand/ioconfig read error.
ioconfig = NULL
NOTICE: cachefs_link(): File system was registered at index 5.
NOTICE: nfs3_link(): File system was registered at index 8.
System Console is on the Built-In Serial Interface
iether4: INITIALIZING HP A7011-60001 PCI/PCI-X 1000Base-SX Dual-port Adapter at
hardware path 2/0/2/1/0
iether6: INITIALIZING HP AD331-60001 PCI/PCI-X 1000Base-T Adapter at hardware pa
th 2/0/4/1/0
iether7: INITIALIZING HP A7011-60001 PCI/PCI-X 1000Base-SX Dual-port Adapter at
hardware path 2/0/8/1/0
iether8: INITIALIZING HP A7011-60001 PCI/PCI-X 1000Base-SX Dual-port Adapter at
hardware path 2/0/8/1/1
iether9: INITIALIZING HP A7011-60001 PCI/PCI-X 1000Base-SX Dual-port Adapter at
hardware path 2/0/9/1/0
iether10: INITIALIZING HP A7011-60001 PCI/PCI-X 1000Base-SX Dual-port Adapter at
hardware path 2/0/9/1/1
iether11: INITIALIZING HP AD331-60001 PCI/PCI-X 1000Base-T Adapter at hardware p
ath 2/0/13/1/0
iether0: INITIALIZING HP AD331-60001 PCI/PCI-X 1000Base-T Adapter at hardware pa
th 0/0/2/1/0
iether5: INITIALIZING HP A7011-60001 PCI/PCI-X 1000Base-SX Dual-port Adapter at
hardware path 2/0/2/1/1
iether1: INITIALIZING HP AD331-60001 PCI/PCI-X 1000Base-T Adapter at hardware pa
th 0/0/4/1/0
iether2: INITIALIZING HP A7011-60001 PCI/PCI-X 1000Base-SX Dual-port Adapter at
hardware path 0/0/9/1/0
iether3: INITIALIZING HP A7011-60001 PCI/PCI-X 1000Base-SX Dual-port Adapter at
hardware path 0/0/9/1/1
Swap device table: (start & size given in 512-byte blocks)
entry 0 - auto-configured on root device; ignored - no room
WARNING: no swap device configured, so dump cannot be defaulted to primary swap.
WARNING: No dump devices are configured. Dump is disabled.
Starting the STREAMS daemons-phase 1
sh: pre_init_rc: not found
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: B11.23_LR FLAVOR=perf Fri Aug 29 22:35:38 PDT 2003 $
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 66840424 Kbytes, lockable: 50922664 Kbytes, available: 59123492 Kb
ytes
* Preparing to execute init...
======= 06/15/10 04:46:17 EDT HP-UX Installation Initialization. (Tue Jun 15
04:46:17 EDT 2010)
@(#)Ignite-UX Revision C.7.4.155
@(#)ignite/launch (opt) Revision:
/branches/IUX_RA0712/ignite/src@71931 Last Modified: 2007-10-15
15:53:11 -0600 (Mon, 15 Oct 2007)
* Configuring RAM filesystems...
* Scanning system for IO devices...
* Boot device is: 0/0/8/1/1.3.0
Recovery tape created from system: hpux01 on Tue May 25 12:41:20 2010
WARNING: The configuration information calls for a non-interactive
installation.
Press
n:
* Using client directory: /var/opt/ignite/clients/0x0018FE2DBD59
* Checking configuration for consistency...
NOTE: Dump space (20971520KB) is less than 50% of system memory
(66840424KB). There is a possibility that the system dump will be
truncated with a failure to capture important system information in
the event of a system crash. You can increase the size of the dump
volumes or add additional dump volumes on the "File System" tab when
using the advanced user interface. See crashconf(1M) for more
information.
WARNING: Free space (16215520KB) in "/var" where /var/adm/crash is located is
less than 25% of system memory (66840424KB). This will likely result
in an inability to capture a single selective compressed dump in the
event of a system crash. Additional space will be required to
uncompress the dump in order to analyze it and to save multiple dumps.
You can increase the size of the "/var" volume on the "File System"
tab when using the advanced user interface.
WARNING: The disk at: 0/0/1/1/0.0.0 (COMPAQ_BF14684970) appears to contain a
file system and boot area. Continuing the installation will destroy
any existing data on this disk.
Press
n:
* Continuing despite above warnings.
* Attempting a non-interactive installation.
* Loading configuration utility...
* Beginning installation from source: /dev/rmt/c3t3d0BEST
======= 06/15/10 04:50:06 EDT Starting system configuration...
* Configure_Disks: Begin
* Mapping LUN Instance Data
* Will install B.11.23 onto this system.
* Creating LVM physical volume "/dev/rdsk/c0t0d0s2" (0/0/1/1/0.0.0).
* Creating volume group "vg00".
* Creating logical volume "vg00/lvol1" (/stand).
* Creating logical volume "vg00/lvol2" (swap_dump).
* Creating logical volume "vg00/lvol3" (/).
* Creating logical volume "vg00/lvol4" (/opt).
* Creating logical volume "vg00/lvol5" (/tmp).
* Creating logical volume "vg00/lvol6" (/usr).
* Creating logical volume "vg00/lvol7" (/var).
* Creating logical volume "vg00/lvol8" (/home).
* Creating logical volume "vg00/oracle" (/u01).
* Extending logical volume "vg00/lvol1" (/stand).
* Extending logical volume "vg00/lvol2" (swap_dump).
* Extending logical volume "vg00/lvol3" (/).
* Extending logical volume "vg00/lvol4" (/opt).
* Extending logical volume "vg00/lvol5" (/tmp).
* Extending logical volume "vg00/lvol6" (/usr).
* Extending logical volume "vg00/lvol7" (/var).
* Extending logical volume "vg00/lvol8" (/home).
* Extending logical volume "vg00/oracle" (/u01).
* Making HFS filesystem for "/stand", (/dev/vg00/rlvol1).
* Making VxFS filesystem for "/", (/dev/vg00/rlvol3).
* Making VxFS filesystem for "/opt", (/dev/vg00/rlvol4).
* Making VxFS filesystem for "/tmp", (/dev/vg00/rlvol5).
* Making VxFS filesystem for "/usr", (/dev/vg00/rlvol6).
* Making VxFS filesystem for "/var", (/dev/vg00/rlvol7).
* Making VxFS filesystem for "/home", (/dev/vg00/rlvol8).
* Making VxFS filesystem for "/u01", (/dev/vg00/roracle).
* Setting rotational delay to 0 for "/stand".
* Configure_Disks: Complete
* Download_mini-system: Begin
x ./usr/sbin/idisk, 85596 bytes, 168 tape blocks
x ./sbin/fs/hfs/mkfs, 586996 bytes, 1147 tape blocks
x ./sbin/fs/hfs/newfs, 461420 bytes, 902 tape blocks
x ./sbin/fs/vxfs/mkfs, 1966500 bytes, 3841 tape blocks
x ./sbin/fs/vxfs/newfs, 461988 bytes, 903 tape blocks
x ./sbin/fs/vxfs5.0/mkfs, 3147180 bytes, 6147 tape blocks
x ./sbin/fs/vxfs5.0/newfs, 1704600 bytes, 3330 tape blocks
x ./sbin/mkfs symbolic link to /sbin/fs_wrapper
x ./sbin/newfs symbolic link to /sbin/fs_wrapper
x ./sbin/lib/mfsconfig.d/hfs, 1053 bytes, 3 tape blocks
x ./sbin/lib/mfsconfig.d/vxfs5.0, 3040 bytes, 6 tape blocks
x ./sbin/fs_wrapper, 488324 bytes, 954 tape blocks
x ./sbin/sh, 993868 bytes, 1942 tape blocks
x ./usr/sbin/tunefs, 33756 bytes, 66 tape blocks
x ./sbin/extendfs symbolic link to /sbin/fs_wrapper
x ./sbin/fs/vxfs5.0/extendfs, 3038024 bytes, 5934 tape blocks
x ./sbin/lvchange, 2171932 bytes, 4243 tape blocks
./sbin/lvcreate linked to ./sbin/lvchange
./sbin/lvdisplay linked to ./sbin/lvchange
./sbin/lvextend linked to ./sbin/lvchange
./sbin/lvlnboot linked to ./sbin/lvchange
./sbin/lvreduce linked to ./sbin/lvchange
./sbin/lvremove linked to ./sbin/lvchange
./sbin/lvrmboot linked to ./sbin/lvchange
./sbin/pvchange linked to ./sbin/lvchange
./sbin/pvcreate linked to ./sbin/lvchange
./sbin/pvdisplay linked to ./sbin/lvchange
./sbin/pvmove linked to ./sbin/lvchange
./sbin/vgcfgbackup linked to ./sbin/lvchange
./sbin/vgcfgrestore linked to ./sbin/lvchange
./sbin/vgchange linked to ./sbin/lvchange
./sbin/vgcreate linked to ./sbin/lvchange
./sbin/vgdisplay linked to ./sbin/lvchange
./sbin/vgexport linked to ./sbin/lvchange
./sbin/vgextend linked to ./sbin/lvchange
./sbin/vgimport linked to ./sbin/lvchange
./sbin/vgreduce linked to ./sbin/lvchange
./sbin/vgremove linked to ./sbin/lvchange
./sbin/vgscan linked to ./sbin/lvchange
./sbin/pvck linked to ./sbin/lvchange
x ./usr/lib/uxbootlf, 707584 bytes, 1382 tape blocks
x ./usr/lib/efi/EFI/HPUX/hpux.efi, 645215 bytes, 1261 tape blocks
x ./usr/lib/efi/EFI/HPUX/nbp.efi, 24576 bytes, 48 tape blocks
x ./usr/lib/efi/EFI/Intel_Firmware/fpswa.efi, 328192 bytes, 641 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/README.network, 799 bytes, 2 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/ftp.efi, 542208 bytes, 1059 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/ifconfig.efi, 392704 bytes, 767 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/inet.nsh, 962 bytes, 2 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/ping.efi, 383488 bytes, 749 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/route.efi, 394752 bytes, 771 tape blocks
x ./usr/lib/efi/EFI/hp/tools/network/tcpipv4.efi, 601088 bytes, 1174 tape blocks
x ./usr/lib/efi/startup.nsh, 296 bytes, 1 tape blocks
x ./usr/lib/libdld.1, 12288 bytes, 24 tape blocks
x ./usr/lib/libdld.2, 20480 bytes, 40 tape blocks
x ./usr/lib/libdld.sl symbolic link to ./libdld.2
x ./usr/lib/libelf.2, 102400 bytes, 200 tape blocks
x ./usr/lib/hpux32/aries32.so, 2110540 bytes, 4123 tape blocks
x ./usr/lib/hpux32/dld.so, 925808 bytes, 1809 tape blocks
x ./usr/lib/hpux32/libCsup.so.1, 353788 bytes, 691 tape blocks
x ./usr/lib/hpux32/libc.so.1, 2662016 bytes, 5200 tape blocks
x ./usr/lib/hpux32/libcl.so symbolic link to ./libcl.so.1
x ./usr/lib/hpux32/libcl.so.1, 5064 bytes, 10 tape blocks
x ./usr/lib/hpux32/libdl.so.1, 76704 bytes, 150 tape blocks
x ./usr/lib/hpux32/libelf.so.1, 163468 bytes, 320 tape blocks
x ./usr/lib/hpux32/libm.so symbolic link to ./libm.so.1
x ./usr/lib/hpux32/libm.so.1, 1487848 bytes, 2906 tape blocks
x ./usr/lib/hpux32/libnss_files.so.1, 98120 bytes, 192 tape blocks
x ./usr/lib/hpux32/libpthread.so.1, 603896 bytes, 1180 tape blocks
x ./usr/lib/hpux32/libsec.so.1, 294924 bytes, 577 tape blocks
x ./usr/lib/hpux32/libsin.so symbolic link to ./libsin.so.1
x ./usr/lib/hpux32/libsin.so.1, 18332 bytes, 36 tape blocks
x ./usr/lib/hpux32/libstd.so.1, 163340 bytes, 320 tape blocks
x ./usr/lib/hpux32/libstd_v2.so.1, 1752524 bytes, 3423 tape blocks
x ./usr/lib/hpux32/libstream.so.1, 388780 bytes, 760 tape blocks
x ./usr/lib/hpux32/libuca.so.1, 34464 bytes, 68 tape blocks
x ./usr/lib/hpux32/libunwind.so.1, 344144 bytes, 673 tape blocks
x ./usr/lib/hpux32/libxcurses.so.1, 531640 bytes, 1039 tape blocks
x ./usr/lib/hpux32/pa_boot32.so, 105836 bytes, 207 tape blocks
x ./usr/lib/hpux32/uld.so, 110700 bytes, 217 tape blocks
x ./usr/lib/hpux32/libnsl.so.1, 1045180 bytes, 2042 tape blocks
x ./usr/lib/hpux32/libnss_dns.so.1, 59784 bytes, 117 tape blocks
x ./usr/lib/hpux32/libxti.so.1, 202140 bytes, 395 tape blocks
x ./usr/lib/hpux32/libdcekt.so symbolic link to ./libdcekt.so.1
x ./usr/lib/hpux32/libdcekt.so.1, 10073940 bytes, 19676 tape blocks
x ./usr/lib/hpux32/libgss.so, 132132 bytes, 259 tape blocks
x ./usr/lib/hpux32/libcom_err.so, 22376 bytes, 44 tape blocks
x ./usr/lib/hpux32/libk5crypto.so, 177872 bytes, 348 tape blocks
x ./usr/lib/hpux32/libkrb5.so, 903932 bytes, 1766 tape blocks
x ./usr/lib/libc.1, 1523712 bytes, 2976 tape blocks
x ./usr/lib/libc.2, 1433600 bytes, 2800 tape blocks
x ./usr/lib/libcurses.1, 155648 bytes, 304 tape blocks
x ./usr/lib/libnss_files.1, 45056 bytes, 88 tape blocks
x ./usr/lib/libpthread.1, 110592 bytes, 216 tape blocks
x ./usr/lib/libsec.2, 163840 bytes, 320 tape blocks
x ./usr/lib/nls/msg/C/dcerpc.cat, 13755 bytes, 27 tape blocks
x ./usr/lib/nls/msg/C/cpp.cat, 11084 bytes, 22 tape blocks
x ./usr/lib/libnsl.1, 630784 bytes, 1232 tape blocks
x ./usr/lib/libnsl.sl symbolic link to ./libnsl.1
x ./usr/lib/libxti.2, 106496 bytes, 208 tape blocks
x ./usr/lib/sw/ui/C/smc_addhost.ui, 2571 bytes, 6 tape blocks
x ./usr/lib/sw/ui/C/smc_analyze.ui, 4663 bytes, 10 tape blocks
x ./usr/lib/sw/ui/C/smc_bundles.ui, 1775 bytes, 4 tape blocks
x ./usr/lib/sw/ui/C/smc_chgloc.ui, 3634 bytes, 8 tape blocks
x ./usr/lib/sw/ui/C/smc_defs.h, 24742 bytes, 49 tape blocks
x ./usr/lib/sw/ui/C/smc_depend.ui, 2824 bytes, 6 tape blocks
x ./usr/lib/sw/ui/C/smc_details.ui, 3990 bytes, 8 tape blocks
x ./usr/lib/sw/ui/C/smc_dsa.ui, 8100 bytes, 16 tape blocks
x ./usr/lib/sw/ui/C/smc_init.ui, 708 bytes, 2 tape blocks
x ./usr/lib/sw/ui/C/smc_install.ui, 4018 bytes, 8 tape blocks
x ./usr/lib/sw/ui/C/smc_jobopts.ui, 116062 bytes, 227 tape blocks
x ./usr/lib/sw/ui/C/smc_jobs.ui, 20222 bytes, 40 tape blocks
x ./usr/lib/sw/ui/C/smc_list.ui, 1962 bytes, 4 tape blocks
x ./usr/lib/sw/ui/C/smc_menudefs.h, 1792 bytes, 4 tape blocks
x ./usr/lib/sw/ui/C/smc_options.ui, 5889 bytes, 12 tape blocks
x ./usr/lib/sw/ui/C/smc_patch.ui, 2527 bytes, 5 tape blocks
x ./usr/lib/sw/ui/C/smc_remove.ui, 3289 bytes, 7 tape blocks
x ./usr/lib/sw/ui/C/smc_rmsourc.ui, 2411 bytes, 5 tape blocks
x ./usr/lib/sw/ui/C/smc_sched.ui, 4591 bytes, 9 tape blocks
x ./usr/lib/sw/ui/C/smc_selalt.ui, 2804 bytes, 6 tape blocks
x ./usr/lib/sw/ui/C/smc_seldpt.ui, 2404 bytes, 5 tape blocks
x ./usr/lib/sw/ui/C/smc_session.ui, 2180 bytes, 5 tape blocks
x ./usr/lib/sw/ui/C/smc_softinf.ui, 5653 bytes, 12 tape blocks
x ./usr/lib/sw/ui/C/smc_softwar.ui, 18847 bytes, 37 tape blocks
x ./usr/lib/sw/ui/C/smc_source.ui, 4902 bytes, 10 tape blocks
x ./usr/lib/sw/ui/C/smc_targets.ui, 12190 bytes, 24 tape blocks
x ./usr/lib/sw/ui/C/smc_task.ui, 5805 bytes, 12 tape blocks
x ./usr/lib/sw/help/C/sduhelp.hv, 28436 bytes, 56 tape blocks
x ./usr/lib/sw/help/C/sduhelp.hvk, 5145 bytes, 11 tape blocks
x ./usr/lib/sw/help/C/sduhelp00.ht, 215428 bytes, 421 tape blocks
x ./usr/lib/sw/help/C/sduhelp01.ht, 14210 bytes, 28 tape blocks
x ./usr/lib/libM.1 symbolic link to ./libm.1
x ./usr/lib/libm.1, 98773 bytes, 193 tape blocks
x ./usr/lib/libm.2, 188416 bytes, 368 tape blocks
x ./usr/lib/libcma.1, 466944 bytes, 912 tape blocks
x ./usr/lib/libcma.2, 487424 bytes, 952 tape blocks
x ./usr/lib/libcma.sl symbolic link to ./libcma.2
x ./usr/lib/libd4r.1, 45056 bytes, 88 tape blocks
x ./usr/lib/libd4r.sl symbolic link to ./libd4r.1
x ./usr/lib/libdce.1, 4235264 bytes, 8272 tape blocks
x ./usr/lib/libdce.2, 4313088 bytes, 8424 tape blocks
x ./usr/lib/libdce.sl symbolic link to ./libdce.2
x ./usr/lib/libdcekt.1, 4620288 bytes, 9024 tape blocks
x ./usr/lib/dld.sl, 274432 bytes, 536 tape blocks
x ./usr/lib/libsmapi.so.2, 130108 bytes, 255 tape blocks
x ./usr/bin/lifcp, 80180 bytes, 157 tape blocks
x ./usr/bin/lifls, 40916 bytes, 80 tape blocks
x ./usr/bin/lifrm, 40708 bytes, 80 tape blocks
x ./usr/bin/getopts, 162 bytes, 1 tape blocks
x ./usr/bin/basename, 9936 bytes, 20 tape blocks
x ./usr/bin/chgrp, 35596 bytes, 70 tape blocks
x ./usr/bin/cmp, 23040 bytes, 45 tape blocks
x ./usr/bin/cp, 59112 bytes, 116 tape blocks
x ./usr/bin/cut, 23304 bytes, 46 tape blocks
x ./usr/bin/dd, 32876 bytes, 65 tape blocks
x ./usr/bin/dirname, 5772 bytes, 12 tape blocks
x ./usr/bin/egrep, 44548 bytes, 88 tape blocks
x ./usr/bin/expr, 35612 bytes, 70 tape blocks
x ./usr/bin/false, 5660 bytes, 12 tape blocks
./usr/bin/fgrep linked to ./usr/bin/egrep
x ./usr/bin/grep, 44572 bytes, 88 tape blocks
x ./usr/bin/hostname, 5956 bytes, 12 tape blocks
x ./usr/bin/kill, 10836 bytes, 22 tape blocks
x ./usr/bin/ln, 19192 bytes, 38 tape blocks
x ./usr/bin/model, 18084 bytes, 36 tape blocks
x ./usr/bin/ps, 85080 bytes, 167 tape blocks
x ./usr/bin/pwd, 10072 bytes, 20 tape blocks
x ./usr/bin/rm, 66100 bytes, 130 tape blocks
./usr/bin/rmdir linked to ./usr/bin/rm
x ./usr/bin/sed, 86604 bytes, 170 tape blocks
x ./usr/bin/sort, 109064 bytes, 214 tape blocks
x ./usr/bin/tar, 107380 bytes, 210 tape blocks
x ./usr/bin/touch, 18988 bytes, 38 tape blocks
x ./usr/bin/true, 5660 bytes, 12 tape blocks
x ./usr/bin/wc, 14736 bytes, 29 tape blocks
x ./usr/bin/compress, 45196 bytes, 89 tape blocks
x ./usr/bin/ed, 135024 bytes, 264 tape blocks
x ./usr/bin/find, 134380 bytes, 263 tape blocks
x ./usr/bin/getopt, 10196 bytes, 20 tape blocks
x ./usr/bin/id, 14744 bytes, 29 tape blocks
x ./usr/bin/more, 165148 bytes, 323 tape blocks
x ./usr/bin/tail, 45452 bytes, 89 tape blocks
./usr/bin/uncompress linked to ./usr/bin/compress
./usr/bin/zcat linked to ./usr/bin/compress
x ./usr/bin/bdf, 49348 bytes, 97 tape blocks
x ./usr/bin/diff, 88180 bytes, 173 tape blocks
x ./usr/bin/mt, 24660 bytes, 49 tape blocks
x ./usr/bin/ftp, 257816 bytes, 504 tape blocks
x ./usr/bin/rcp, 125288 bytes, 245 tape blocks
x ./usr/bin/remsh, 85648 bytes, 168 tape blocks
x ./usr/bin/ex, 553824 bytes, 1082 tape blocks
./usr/bin/vi linked to ./usr/bin/ex
x ./usr/bin/uname, 417140 bytes, 815 tape blocks
x ./usr/lbin/sysadm/create_sysfile, 49776 bytes, 98 tape blocks
x ./usr/lbin/sysadm/check_dlkm_module, 4187 bytes, 9 tape blocks
x ./usr/lbin/sysadm/system_prep, 10000 bytes, 20 tape blocks
x ./usr/lbin/fs/vxfs5.0/vxdump, 507896 bytes, 992 tape blocks
x ./usr/lbin/fs/vxfs5.0/vxrestore, 556952 bytes, 1088 tape blocks
x ./usr/lbin/sw/control_utils, 155389 bytes, 304 tape blocks
x ./usr/lbin/swagent, 2760220 bytes, 5392 tape blocks
x ./usr/lbin/krs_file_reader, 18228 bytes, 36 tape blocks
x ./usr/lbin/krs_print, 22796 bytes, 45 tape blocks
x ./usr/sbin/kconfig, 595612 bytes, 1164 tape blocks
x ./usr/sbin/mk_kernel, 2505 bytes, 5 tape blocks
x ./usr/sbin/insf symbolic link to /sbin/mksf
x ./usr/sbin/ioinit symbolic link to /sbin/ioinit
x ./usr/sbin/ioscan symbolic link to /sbin/ioscan
x ./usr/sbin/mknod symbolic link to /sbin/mknod
x ./usr/sbin/mount symbolic link to /sbin/mount
x ./usr/sbin/reboot symbolic link to /sbin/reboot
x ./usr/sbin/umount symbolic link to /sbin/umount
x ./usr/sbin/devnm, 22652 bytes, 45 tape blocks
x ./usr/sbin/diskinfo, 46800 bytes, 92 tape blocks
x ./usr/sbin/setboot, 55528 bytes, 109 tape blocks
x ./usr/sbin/swapon, 64428 bytes, 126 tape blocks
x ./usr/sbin/chroot, 5928 bytes, 12 tape blocks
x ./usr/sbin/efi_cp, 167312 bytes, 327 tape blocks
x ./usr/sbin/efi_fsinit, 106352 bytes, 208 tape blocks
x ./usr/sbin/efi_ls, 119648 bytes, 234 tape blocks
x ./usr/sbin/efi_mkdir, 148368 bytes, 290 tape blocks
x ./usr/sbin/efi_rm, 119176 bytes, 233 tape blocks
x ./usr/sbin/efi_rmdir, 115160 bytes, 225 tape blocks
x ./usr/sbin/rvxdump symbolic link to /usr/lbin/fs/vxfs/vxdump
x ./usr/sbin/rvxrestore symbolic link to /usr/lbin/fs/vxfs/vxrestore
x ./usr/sbin/vxdump symbolic link to /usr/lbin/fs/vxfs/vxdump
x ./usr/sbin/vxrestore symbolic link to /usr/lbin/fs/vxfs/vxrestore
x ./usr/sbin/swagentd, 998884 bytes, 1951 tape blocks
x ./usr/sbin/swacl, 3709172 bytes, 7245 tape blocks
./usr/sbin/swconfig linked to ./usr/sbin/swacl
./usr/sbin/swcopy linked to ./usr/sbin/swacl
./usr/sbin/swinstall linked to ./usr/sbin/swacl
./usr/sbin/swlist linked to ./usr/sbin/swacl
x ./usr/sbin/swmodify, 2060644 bytes, 4025 tape blocks
./usr/sbin/swpackage linked to ./usr/sbin/swmodify
./usr/sbin/swreg linked to ./usr/sbin/swacl
./usr/sbin/swremove linked to ./usr/sbin/swacl
./usr/sbin/swverify linked to ./usr/sbin/swacl
x ./usr/share/lib/terminfo/h/hp, 1448 bytes, 3 tape blocks
x ./usr/share/lib/terminfo/v/vt100, 1358 bytes, 3 tape blocks
x ./usr/share/lib/terminfo/w/wy60, 1673 bytes, 4 tape blocks
x ./usr/conf/gen/templates/generic, 551 bytes, 2 tape blocks
x ./usr/ccs/lbin/cpp, 223496 bytes, 437 tape blocks
x ./usr/obam/lbin/gethelp, 1245184 bytes, 2432 tape blocks
x ./usr/obam/lbin/ui_exec, 26708 bytes, 53 tape blocks
x ./usr/obam/lib/libIDMawrt.1, 2682880 bytes, 5240 tape blocks
x ./usr/obam/lib/libIDMawrt.sl symbolic link to ./libIDMawrt.1
x ./usr/obam/lib/libobam.1, 1040384 bytes, 2032 tape blocks
x ./usr/obam/lib/libobam.sl symbolic link to ./libobam.1
x ./usr/obam/lib/obam_aw.dmb, 35252 bytes, 69 tape blocks
x ./usr/obam/lib/libIDMawrt.so.1, 4662844 bytes, 9108 tape blocks
x ./usr/obam/lib/libobam.so symbolic link to ./libobam.so.1
x ./usr/obam/lib/libobam.so.1, 1705060 bytes, 3331 tape blocks
x ./usr/obam/lib/obam_aw_ia.dmb, 35899 bytes, 71 tape blocks
x ./usr/obam/lib/help/C/ui/ui.sdl, 80960 bytes, 159 tape blocks
x ./usr/contrib/bin/gunzip, 188504 bytes, 369 tape blocks
./usr/contrib/bin/gzip linked to ./usr/contrib/bin/gunzip
x ./sbin/fs/cdfs/umount symbolic link to /sbin/fs/hfs/umount
x ./sbin/fs/cdfs/mount, 468396 bytes, 915 tape blocks
x ./sbin/fs/hfs/fsck, 678828 bytes, 1326 tape blocks
x ./sbin/fs/hfs/mount, 477108 bytes, 932 tape blocks
x ./sbin/fs/hfs/umount, 413860 bytes, 809 tape blocks
x ./sbin/fs/vxfs/fsck, 2257044 bytes, 4409 tape blocks
x ./sbin/fs/vxfs/mount, 1883892 bytes, 3680 tape blocks
x ./sbin/fs/vxfs/umount symbolic link to /sbin/fs/hfs/umount
x ./sbin/fs/vxfs/subtype, 1679784 bytes, 3281 tape blocks
x ./sbin/fs/vxfs5.0/fsck, 3319760 bytes, 6484 tape blocks
x ./sbin/fs/vxfs5.0/fstyp, 1659404 bytes, 3242 tape blocks
x ./sbin/fs/vxfs5.0/mount, 3075572 bytes, 6007 tape blocks
x ./sbin/fs/vxfs5.0/umount symbolic link to /sbin/fs/vxfs/umount
x ./sbin/fsck symbolic link to /sbin/fs_wrapper
x ./sbin/awk, 887040 bytes, 1733 tape blocks
x ./sbin/cat, 439060 bytes, 858 tape blocks
x ./sbin/chmod, 480180 bytes, 938 tape blocks
x ./sbin/chown, 500708 bytes, 978 tape blocks
x ./sbin/date, 538332 bytes, 1052 tape blocks
x ./sbin/frecover, 697848 bytes, 1363 tape blocks
x ./sbin/init, 1226836 bytes, 2397 tape blocks
x ./sbin/insf, 950596 bytes, 1857 tape blocks
x ./sbin/ioinit, 508652 bytes, 994 tape blocks
x ./sbin/ioscan, 589124 bytes, 1151 tape blocks
x ./sbin/krsd, 498588 bytes, 974 tape blocks
x ./sbin/ls, 571348 bytes, 1116 tape blocks
x ./sbin/mkboot, 624596 bytes, 1220 tape blocks
x ./sbin/mkdir, 434724 bytes, 850 tape blocks
x ./sbin/mknod, 413900 bytes, 809 tape blocks
x ./sbin/mount, 622892 bytes, 1217 tape blocks
x ./sbin/mv, 477060 bytes, 932 tape blocks
x ./sbin/pax, 821020 bytes, 1604 tape blocks
x ./sbin/reboot, 550940 bytes, 1077 tape blocks
x ./sbin/stty, 440676 bytes, 861 tape blocks
x ./sbin/umount, 518396 bytes, 1013 tape blocks
x ./sbin/restore, 638284 bytes, 1247 tape blocks
x ./dev/config, 0 bytes, 0 blocks, character device
x ./dev/null, 0 bytes, 0 blocks, character device
x ./dev/console, 0 bytes, 0 blocks, character device
x ./dev/kmem, 0 bytes, 0 blocks, character device
x ./dev/mem, 0 bytes, 0 blocks, character device
x ./dev/rroot, 0 bytes, 0 blocks, character device
x ./dev/root, 0 bytes, 0 blocks, character device
x ./dev/tty, 0 bytes, 0 blocks, character device
x ./dev/syscon, 0 bytes, 0 blocks, character device
x ./dev/systty, 0 bytes, 0 blocks, character device
x ./tmp/set_locale, 3305 bytes, 7 tape blocks
x ./var/adm/sw/security/_ACL, 40 bytes, 1 tape blocks
x ./var/adm/sw/security/_OWNER, 62 bytes, 1 tape blocks
x ./var/adm/sw/security/_PROD_DFLT_ACL, 55 bytes, 1 tape blocks
x ./var/adm/sw/security/_SOC_DFLT_ACL, 55 bytes, 1 tape blocks
x ./var/adm/sw/security/secrets, 15 bytes, 1 tape blocks
x ./var/adm/sw/defaults, 1383 bytes, 3 tape blocks
x ./var/opt/ignite/local/manifest/template.def, 14388 bytes, 29 tape blocks
x ./opt/ignite/share/man/man1m.Z/print_manifest.1m, 1428 bytes, 3 tape blocks
x ./opt/ignite/binia/print_manifest, 92392 bytes, 181 tape blocks
x ./opt/ignite/bin symbolic link to /opt/ignite/binia
x ./etc/group, 184 bytes, 1 tape blocks
x ./etc/passwd, 332 bytes, 1 tape blocks
x ./etc/magic, 9013 bytes, 18 tape blocks
x ./etc/nfssec.conf, 1212 bytes, 3 tape blocks
x ./etc/hosts, 485 bytes, 1 tape blocks
x ./etc/services, 11545 bytes, 23 tape blocks
x ./etc/inetsvcs.conf, 15 bytes, 1 tape blocks
x ./etc/nsswitch.conf, 382 bytes, 1 tape blocks
x ./configure3, 2318760 bytes, 4529 tape blocks
x ./monitor_bpr, 130556 bytes, 255 tape blocks
* Download_mini-system: Complete
* Loading_software: Begin
* Installing boot area on disk.
* Formatting HP Service Partition.
* Enabling swap areas.
* Backing up LVM configuration for "vg00".
* Processing the archive source (Recovery Archive).
* Tue Jun 15 04:56:26 EDT 2010: Starting archive load of the source
(Recovery Archive).
* Positioning the tape (/dev/rmt/c3t3d0BESTn).
* Looking for Archive...
* Found the Archive Position. Now load the Archive.
* Archive extraction from tape is beginning. Please wait.
碰到的問題:
1 在小機的控制檯上使用終端時，遇到字元亂碼的問題，更改終端型別為vt120即可．
附錄 2:
在有問題的節點上：
hpux01#[/stand]cmviewcl -v
cmviewcl: Cannot view the cluster configuration: No such file or directory.
Either this node is not configured in a cluster, user doesn't have
access to view the cluster configuration, or there is some obstacle
to viewing the configuration. Check the syslog file for more information.
For a list of possible causes, see the Serviceguard manual for cmviewcl.
You have mail in /var/mail/root
hpux01#[/stand]cmhaltnode -f -v hpux01
cmhaltnode : Unable to connect to the local cluster: No such file or directory.
Either no cluster configuration file exists, the file is corrupted,
cmclconfd is unable to run, or user root on node hpux01
doesn't have access to view the configuration.
You have mail in /var/mail/root
hpux01#[/stand]cmgetconf
cmgetconf: Unable to get local cluster configuration information: No such file or directory.
Either cluster is not configured, or the user doesn't
have access to get the cluster configuration.
You have mail in /var/mail/root
在另一個正常的節點上：
hpux02#[/]cmhaltnode -f -v hpux01
Node hpux01 is already halted.
Successfully halted all nodes specified.
這裡雖然停止了節點1上的SG,但狀態仍顯示為up,原因可能是狀態資訊傳遞不過來.
hpux02#[/]cmviewcl -v
CLUSTER STATUS
cluster1 up
NODE STATUS STATE
hpux01 up running
Cluster_Lock_LVM:
VOLUME_GROUP PHYSICAL_VOLUME STATUS
/dev/vglock /dev/dsk/c23t4d6 unknown
Network_Parameters:
INTERFACE STATUS PATH NAME
PRIMARY unknown 0/0/2/1/0 lan0
PRIMARY unknown 2/0/8/1/0 lan7
STANDBY unknown
2/0/9/1/0 lan9
NODE STATUS STATE
hpux02 up running
Cluster_Lock_LVM:
VOLUME_GROUP PHYSICAL_VOLUME STATUS
/dev/vglock /dev/dsk/c23t4d6 up
Network_Parameters:
INTERFACE STATUS PATH NAME
PRIMARY up 0/0/2/1/0 lan0
PRIMARY up 2/0/8/1/0 lan7
STANDBY up 2/0/9/1/0 lan9
配置檔案資訊 getconf
# **********************************************************************
# ********* HIGH AVAILABILITY CLUSTER CONFIGURATION FILE ***************
# ***** For complete details about cluster parameters and how to *******
# ***** set them, consult the Serviceguard manual. *********************
# **********************************************************************
# Enter a name for this cluster. This name will be used to identify the
# cluster when viewing or manipulating it.
CLUSTER_NAME cluster1
# Cluster Lock Parameters
# The cluster lock is used as a tie-breaker for situations
# in which a running cluster fails, and then two equal-sized
# sub-clusters are both trying to form. a new cluster. The
# cluster lock may be configured using only one of the
# following alternatives on a cluster:
# the lock LUN
# the quorom server
#
#
# Consider the following when configuring a cluster.
# For a two-node cluster, you must use a cluster lock. For
# a cluster of three or four nodes, a cluster lock is strongly
# recommended. For a cluster of more than four nodes, a
# cluster lock is recommended. If you decide to configure
# a lock for a cluster of more than four nodes, it must be
# a quorum server.
# LUN lock disk parameters. Use the CLUSTER_LOCK_LUN parameter
# to define the device on a per node basis. The device may only
# be used for this purpose and by only a single cluster.
#
# Example for a FC storage array cluster disk
# CLUSTER_LOCK_LUN /dev/dsk/c1t2d3s1
# For 11.31 and later versions of HP-UX
# CLUSTER_LOCK_LUN /dev/disk/disk4_p2
# Quorum Server Parameters. Use the QS_HOST, QS_POLLING_INTERVAL,
# and QS_TIMEOUT_EXTENSION parameters to define a quorum server.
# The QS_HOST is the host name or IP address of the system
# that is running the quorum server process. The
# QS_POLLING_INTERVAL (microseconds) is the interval at which
# Serviceguard checks to make sure the quorum server is running.
# The optional QS_TIMEOUT_EXTENSION (microseconds) is used to increase
# the time interval after which the quorum server is marked DOWN.
#
# The default quorum server timeout is calculated from the
# Serviceguard cluster parameters, including NODE_TIMEOUT and
# HEARTBEAT_INTERVAL. If you are experiencing quorum server
# timeouts, you can adjust these parameters, or you can include
# the QS_TIMEOUT_EXTENSION parameter.
#
# The value of QS_TIMEOUT_EXTENSION will directly effect the amount
# of time it takes for cluster reformation in the event of failure.
# For example, if QS_TIMEOUT_EXTENSION is set to 10 seconds, the cluster
# reformation will take 10 seconds longer than if the QS_TIMEOUT_EXTENSION
# was set to 0. This delay applies even if there is no delay in
# contacting the Quorum Server. The recommended value for
# QS_TIMEOUT_EXTENSION is 0, which is used as the default
# and the maximum supported value is 30000000 (5 minutes).
#
# For example, to configure a quorum server running on node
# "qshost" with 120 seconds for the QS_POLLING_INTERVAL and to
# add 2 seconds to the system assigned value for the quorum server
# timeout, enter:
#
# QS_HOST qshost
# QS_POLLING_INTERVAL 120000000
# QS_TIMEOUT_EXTENSION 2000000
FIRST_CLUSTER_LOCK_VG /dev/vglock
# Definition of nodes in the cluster.
# Repeat node definitions as necessary for additional nodes.
# NODE_NAME is the specified nodename in the cluster.
# It must match the hostname and both cannot contain full domain name.
# Each NETWORK_INTERFACE, if configured with IPv4 address,
# must have ONLY one IPv4 address entry with it which could
# be either HEARTBEAT_IP or STATIONARY_IP.
# Each NETWORK_INTERFACE, if configured with IPv6 address(es)
# can have multiple IPv6 address entries(up to a maximum of 2,
# only one IPv6 address entry belonging to site-local scope
# and only one belonging to global scope) which must be all
# STATIONARY_IP. They cannot be HEARTBEAT_IP.
NODE_NAME hpux01
NETWORK_INTERFACE lan0
HEARTBEAT_IP 192.168.1.1
NETWORK_INTERFACE lan7
STATIONARY_IP 10.230.12.18
NETWORK_INTERFACE lan9
# CLUSTER_LOCK_LUN
# Primary Network Interfaces on Bridged Net 1: lan0.
# Warning: There are no standby network interfaces on bridged net 1.
# Primary Network Interfaces on Bridged Net 2: lan7.
NODE_NAME hpux02
NETWORK_INTERFACE lan0
HEARTBEAT_IP 192.168.1.2
NETWORK_INTERFACE lan7
STATIONARY_IP 10.230.12.19
NETWORK_INTERFACE lan9
# CLUSTER_LOCK_LUN
FIRST_CLUSTER_LOCK_PV /dev/dsk/c23t4d6
# Primary Network Interfaces on Bridged Net 1: lan0.
# Warning: There are no standby network interfaces on bridged net 1.
# Primary Network Interfaces on Bridged Net 2: lan7.
# Possible standby Network Interfaces on Bridged Net 2: lan9.
# Cluster Timing Parameters (microseconds).
# The NODE_TIMEOUT parameter defaults to 2000000 (2 seconds).
# This value is recommended for installations in which the highest
# priority is to reform. the cluster as fast as possible in
# case of failure. But this value can sometimes lead to reformations
# caused by short-lived system hangs or network load spikes. If your
# highest priority is to minimize reformations, consider using
# a higher setting. For a significant portion of installations,
# a setting of 5000000 to 8000000 (5 to 8 seconds) is appropriate.
# The maximum value recommended for NODE_TIMEOUT is 30000000
# (30 seconds).
HEARTBEAT_INTERVAL 1000000
NODE_TIMEOUT 2000000
# Configuration/Reconfiguration Timing Parameters (microseconds).
AUTO_START_TIMEOUT 600000000
NETWORK_POLLING_INTERVAL 2000000
# Network Monitor Configuration Parameters.
# The NETWORK_FAILURE_DETECTION parameter determines how LAN card failures are detected.
# If set to INONLY_OR_INOUT, a LAN card will be considered down when its inbound
# message count stops increasing or when both inbound and outbound
# message counts stop increasing.
# If set to INOUT, both the inbound and outbound message counts must
# stop increasing before the card is considered down.
NETWORK_FAILURE_DETECTION INOUT
# Package Configuration Parameters.
# Enter the maximum number of packages which will be configured in the cluster.
# You can not add packages beyond this limit.
# This parameter is required.
MAX_CONFIGURED_PACKAGES 150
# Access Control Policy Parameters.
#
# Three entries set the access control policy for the cluster:
# First line must be USER_NAME, second USER_HOST, and third USER_ROLE.
# Enter a value after each.
#
# 1. USER_NAME can either be ANY_USER, or a maximum of
# 8 login names from the /etc/passwd file on user host.
# The following special characters are NOT supported for USER_NAME
# ' ', '/', '\', '*'
# 2. USER_HOST is where the user can issue Serviceguard commands.
# If using Serviceguard Manager, it is the COM server.
# Choose one of these three values: ANY_SERVICEGUARD_NODE, or
# (any) CLUSTER_MEMBER_NODE, or a specific node. For node,
# use the official hostname from domain name server, and not
# an IP addresses or fully qualified name.
# 3. USER_ROLE must be one of these three values:
# * MONITOR: read-only capabilities for the cluster and packages
# * PACKAGE_ADMIN: MONITOR, plus administrative commands for packages
# in the cluster
# * FULL_ADMIN: MONITOR and PACKAGE_ADMIN plus the administrative
# commands for the cluster.
#
# Access control policy does not set a role for configuration
# capability. To configure, a user must log on to one of the
# cluster's nodes as root (UID=0). Access control
# policy cannot limit root users' access.
#
# MONITOR and FULL_ADMIN can only be set in the cluster configuration file,
# and they apply to the entire cluster. PACKAGE_ADMIN can be set in the
# cluster or a package configuration file. If set in the cluster
# configuration file, PACKAGE_ADMIN applies to all configured packages.
# If set in a package configuration file, PACKAGE_ADMIN applies to that
# package only.
#
# Conflicting or redundant policies will cause an error while applying
# the configuration, and stop the process. The maximum number of access
# policies that can be configured in the cluster is 200.
#
# Example: to configure a role for user john from node noir to
# administer a cluster and all its packages, enter:
# USER_NAME john
# USER_HOST noir
# USER_ROLE FULL_ADMIN
# List of OPS Volume Groups.
# Formerly known as DLM Volume Groups, these volume groups
# will be used by OPS or RAC cluster applications via
# the vgchange -a s command. (Note: the name DLM_VOLUME_GROUP
# is also still supported for compatibility with earlier versions.)
# For example:
# OPS_VOLUME_GROUP /dev/vgdatabase
# OPS_VOLUME_GROUP /dev/vg02
OPS_VOLUME_GROUP /dev/vglock
OPS_VOLUME_GROUP /dev/vg_oradata
OPS_VOLUME_GROUP /dev/vg_cdz
來自 “ ITPUB部落格 ” ，連結：http://blog.itpub.net/10248702/viewspace-665955/，如需轉載，請註明出處，否則將追究法律責任。
相關文章
- 如何救回硬碟上誤刪的檔案硬碟
- Mac清理過程中如何避免誤刪CleanMyMac語言檔案MacC語言
- hpux刪除檔案後空間不釋放UX
- 一次心驚肉跳的伺服器誤刪檔案的恢復過程伺服器
- 被誤刪的檔案正確處理方法，快速找回誤刪的檔案
- HPUX 磁帶恢復的大概過程UX
- 如何找回誤刪的檔案？
- 儲存過程誤刪除的恢復儲存過程
- lsof恢復誤刪的檔案
- 刪除github上的檔案Github
- 誤刪檔案能找回嗎?簡單誤刪檔案找回教程分享
- HPUX 擴檔案系統UX
- OS 刪除oracle資料檔案恢復過程Oracle
- HPUX下lv調整-lv擴容和檔案系統擴容UX
- 檔案系統修復的一個過程
- Hadoop VERSION檔案誤刪Hadoop
- 關於/dev/null和/dev/zero兩個檔案裝置devNull
- 一次物理刪除資料檔案的恢復過程
- hpux擴充檔案系統UX
- 一個 java 檔案的執行過程詳解Java
- RocketMQ -- 過期檔案的刪除MQ
- gitee誤刪專案，重新上傳Gitee
- 通過SQL儲存過程刪除過期的資料庫Bak備份檔案SQL儲存過程資料庫
- 透過控制程式碼檔案恢復linux下誤刪除的資料檔案Linux
- 如何有效恢復誤刪的HDFS檔案
- 怎麼找回電腦誤刪的檔案
- 被誤刪的檔案快速恢復方法
- 避免誤刪檔案的12條建議
- 使用lsof恢復誤刪除的檔案
- git恢復誤刪未提交的檔案Git
- eclipse 恢復誤刪檔案Eclipse
- 在HPUX ASM上建立表空間產生的錯誤UXASM
- 一個microsoft的.exe程式檔案的啟動過程 (轉)ROS
- kafka-- 過期檔案的刪除Kafka
- windows下刪除過期的檔案Windows
- 恢復ext4檔案系統被誤刪的檔案
- 資料檔案誤刪--但有資料檔案的copy恢復
- 重建/dev/null檔案devNull