Errors Ora-00202, Ora-27091 and Ora-27069 Appear in the alert log File-344764.1
Errors Ora-00202, Ora-27091 and Ora-27069 Appear in the alert log File[
Error | Note | Description | Corruption related to: |
ORA-1578 | ORA-1578 is reported when a block is thought to be corrupt on read. | Block | |
Note 1578.1 | OERR: ORA-1578 "ORACLE data block corrupted (file # %s, block # %s)" Master Note | ||
Note 18976.1 | OERR: ORA-1578 "ORACLE data block corrupted (file # %s, block # %s)" | ||
Note 1392417.1 | Fractured Block explanation | ||
Note 28814.1 | Handling Oracle Block Corruptions in Oracle7/8/8i/9i/10g/11g | ||
Note 432923.1 | Diagnosing and Resolving 1578 reported on a Local Index of a Partitioned table | ||
ORA-1410 | This error is raised when an operation refers to a ROWID in a table for which there is no such row. The reference to a ROWID may be implicit from a WHERE CURRENT OF clause or directly from a WHERE ROWID=... clause. ORA 1410 indicates the ROWID is for a BLOCK that is not part of this table. | Row | |
Note 806195.1 | Understanding The ORA-1410 | ||
Note 422771.1 | Summary Of Bugs Containing ORA 1410 | ||
Note 18815.1 | OERR: ORA 1410 "invalid ROWID" | ||
ORA-8103 | The object has been deleted by another user since the operation began. If the error is reproducible, following may be the reasons:- a.) The header block has an invalid block type. b.) The data_object_id (seg/obj) stored in the block is different than the data_object_id stored in the segment header. See dba_objects.data_object_id and compare it to the decimal value stored in the block (field seg/obj). | Block | |
Note 268302.1 | ORA-8103 Troubleshooting, Diagnostic and Solution | ||
Note 8103.1 | OERR: ORA-8103 "object no longer exists" / Troubleshooting, Diagnostic and Solution | ||
ORA-8102 | An ORA-08102 indicates that there is a mismatch between the key(s) stored in the index and the values stored in the table. What typically happens is the index is built and at some future time, some type of corruption occurs, either in the table or index, to cause the mismatch. | Index | |
Note 8102.1 | OERR ORA-8102 "index key not found, obj# %s, file %s, block %s (%s) | ||
ORA-1499 | An error occurred when validating an index or a table using the ANALYZE command. One or more entries does not point to the appropriate cross-reference. | Index | |
Note 563070.1 | ORA-1499. Table/Index row count mismatch | ||
Note 1499.1 | OERR: ORA-1499 table/Index Cross Reference Failure - see trace file | ||
ORA-1498 | Generally this is a result of an ANALYZE ... VALIDATE ... command. This error generally manifests itself when there is inconsistency in the data/Index block. Some of the block check errors that may be found:- a.) Row locked by a non-existent transaction b.) The amount of space used is not equal to block size c.) Transaction header lock count mismatch. While support are processing the tracefile it may be worth the re-running the ANALYZE after restarting the database to help show if the corruption is consistent or if it 'moves'. Send the tracefile to support for analysis. If the ANALYZE was against an index you should check the whole object. Eg: Find the tablename and execute: ANALYZE TABLE xxx VALIDATE STRUCTURE CASCADE; | Block | |
Note 18898.1 | OERR: ORA 1498 "block check failure - see trace file" | ||
ORA-26040 | Trying to access data in block that was loaded without redo generation using the NOLOGGING/UNRECOVERABLE option. This Error raises always together with ORA-1578 | Block | |
Note 71344.1 | OERR ORA-26040 Data block was loaded using the NOLOGGING option | ||
Note 794505.1 | ORA-1578 / ORA-26040 Corrupt blocks by NOLOGGING - Error explanation and solution | ||
Note 293515.1 | ORA-1578 ORA-26040 in a LOB segment - Script. to solve the errors | ||
Note 1071869.1 | ORA-1578 ORA-26040 in 11g for DIRECT PATH with NOARCHIVELOG even if LOGGING is enabled | ||
Note 430230.1 | ORA-1578 ORA-26040 On Awr Table | ||
Note 272316.1 | Errors ORA-01578, ORA-26040 On Standby Database | ||
Note 416476.1 | Workflow Tables ORA-01578 ORACLE data block corrupted ORA-26040 Data block was loaded using the NOLOGGING option | ||
Note 763009.1 | ORA-1578, ORA-26040 Data block was loaded using the NOLOGGING option | ||
ORA-600[12700] | Oracle is trying to access a row using its ROWID, which has been obtained from an index. A mismatch was found between the index rowid and the data block it is pointing to. The rowid points to a non-existent row in the data block. The corruption can be in data and/or index blocks. ORA-600 [12700] can also be reported due to a consistent read (CR) problem. | Consistent Read | |
Note 155933.1 | Resolving an ORA-600 [12700] error in Oracle 8 and above. | ||
Note 28229.1 | ORA-600 [12700] "Index entry Points to Missing ROWID" | ||
ORA-600[3020] | This is called a 'STUCK RECOVERY'. There is an inconsistency between the information stored in the redo and the information stored in a database block being recovered. | Redo | |
Note 30866.1 | ORA-600 [3020] "Stuck Recovery" | ||
Note 269352.1 | Information Required for Root Cause Analysis of ORA-600 [3020] (stuck recovery) | ||
ORA-600[4194] | A mismatch has been detected between Redo records and rollback (Undo) records. We are validating the Undo record number relating to the change being applied against the maximum undo record number recorded in the undo block. This error is reported when the validation fails. | Undo | |
Note 39283.1 | ORA-600 [4194] "Undo Record Number Mismatch While Adding Undo Record" | ||
Note 281429.1 | Basic Steps to be Followed While Solving ORA-00600 [4194]/[4193] Errors Without Using Unsupported parameter | ||
ORA-600[4193] | A mismatch has been detected between Redo records and Rollback (Undo) records. We are validating the Undo block sequence number in the undo block against the Redo block sequence number relating to the change being applied. This error is reported when this validation fails. | Undo | |
Note 39282.1 | ORA-600 [4193] "seq# mismatch while adding undo record" | ||
Note 281429.1 | Basic Steps to be Followed While Solving ORA-00600 [4194]/[4193] Errors Without Using Unsupported parameter | ||
Note 452662.1 | Ora-600 [4193] When Opening Or Shutting Down A Database | ||
Note 763566.1 | ORA-600 [4193] When Trying To Open The Database | ||
ORA-600[4137] | While backing out an undo record (i.e. at the time of rollback) we found a transaction id mis-match indicating either a corruption in the rollback segment or corruption in an object which the rollback segment is trying to apply undo records on. This would indicate a corrupted rollback segment. | Undo/Redo | |
Note 43914.1 | ORA-600 [4137] "XID in Undo and Redo Does Not Match" | ||
ORA-600[6101] | Not enough free space was found when inserting a row into an index leaf block during the application of undo. | Index | |
Note 40640.1 | ORA-600 [6101] "insert into leaf block (undo)" | ||
ORA-600[2103] | Oracle is attempting to read or update a generic entry in the control file. If the entry number is invalid, ORA-600 [2130] is logged. | Control File | |
Note 28225.1 | ORA-600 [2130] "Attempt to access non-existant controlfile entry" | ||
ORA-600[4512] | Oracle is checking the status of transaction locks within a block. If the lock number is greater than the number of lock entries, ORA-600 [4512] is reported followed by a stack trace, process state and block dump. This error possibly indicates a block corruption. | Block | |
Note 73455.1 | ORA-600 [4512] "Lock count mismatch" | ||
ORA-600[2662] | A data block SCN is ahead of the current SCN. The ORA-600 [2662] occurs when an SCN is compared to the dependent SCN stored in a UGA variable. If the SCN is less than the dependent SCN then we signal the ORA-600 [2662] internal error. | Block | |
Note 28929.1 | ORA-600 [2662] "Block SCN is ahead of Current SCN" | ||
Note 1021243.6 | ORA 600 [2662] DURING STARTUP | ||
ORA-600[4097] | We are accessing a rollback segment header to see if a transaction has been committed. However, the xid given is in the future of the transaction table. This could be due to a rollback segment corruption issue OR you might be hitting the following known problem. | Undo | |
Note 44893.1 | ORA-600 [4097] "Corruption" | ||
ORA-600[4000] | It means that Oracle has tried to find an undo segment number in the dictionary cache and failed. | Undo | |
Note 47456.1 | ORA-600 [4000] "trying to get dba of undo segment header block from usn" | ||
ORA-600[6006] | Oracle is undoing an index leaf key operation. If the key is not found, ORA-00600 [6006] is logged. ORA-600[6006] is usually caused by a media corruption problem related to either a lost write to disk or a corruption on disk. | Index | |
Note 138899.1 | ORA-600 [6006] | ||
ORA-600[4552] | This assertion is raised because we are trying to unlock the rows in a block, but receive an incorrect block type. The second argument is the block type received. | Block | |
Note 138846.1 | ORA-600 [4555] | ||
ORA-600[6856] | Oracle is checking that the row slot we are about to free is not already on the free list. This internal error is raised when this check fails. | Row | |
Note 41719.1 | ORA-600 [6856] "Corrupt Block When Freeing a Row Slot | ||
ORA-600[13011] | During a delete operation we are deleting from a view via an instead-of trigger or an Index organized table and have exceeded a 5000 pass count when we raise this exception. | Row | |
Note 28184.1 | ORA-600 [13011] "Problem occurred when trying to delete a row" | ||
ORA-600[13013] | During the execution of an UPDATE statement, after several attempts (Arg [a] passcount) we are unable to get a stable set of rows that conform. to the WHERE clause. | Row | |
Note 28185.1 | ORA-600 [13013] "Unable to get a Stable set of Records" | ||
Note 816784.1 | How to resolve ORA-00600 [13013], [5001] | ||
ORA-600[13030] | |||
Note 351760.1 | ORA-600 [13030] | ||
ORA-600[25012] | We are trying to generate the absolute file number given a tablespace number and relative file number and cannot find a matching file number or the file number is zero. | afn/rdba/tsn | |
Note 100073.1 | ORA-600 [25012] "Relative to Absolute File Number Conversion Error" | ||
ORA-600[25026] | Looking up/checking a tablespace invalid tablespace ID and/or rdba found | afn/rdba/tsn | |
Note 335029.1 | ORA-600 [25026] | ||
ORA-600[25027] | Invalid tsn and/or rfn found | afn/rdba/tsn | |
Note 284433.1 | ORA-600 [25027] | ||
ORA-600[kcbz_check_objd_typ] | An object block buffer in memory is checked and is found to have the wrong object id. This is most likely due to corruption. | Buffer Cache | |
Note 406787.1 | ORA-600 [kcbz_check_objd_typ_3] | ||
Note 824154.1 | ORA-600 [kcbz_check_objd_typ] | ||
ORA-600[kddummy_blkchk] ORA-600[kdblkcheckerror] | ORA-600[kddummy_blkchk] is for 10.1/10.2 and ORA-600[kdblkcheckerror] for 11 onwards. | Block | |
Note 300581.1 | ORA-600 [kddummy_blkchk] | ||
Note 1342443.1 | How to Resolve ORA-00600[kddummy_blkchk] | ||
Note 882875.1 | ORA-600 [kdblkcheckerror] | ||
ORA-600[ktadrprc-1] | Dictionary | ||
Note 309315.1 | ORA-600 [ktadrprc-1] | ||
ORA-600[ktsircinfo_num1] | This exception occurs when there are problems obtaining the row cache information correctly from sys.seg$. In most cases there is no information in sys.seg$. | Dictionary | |
Note 139182.1 | ORA-600 [ktsircinfo_num1] | ||
ORA-600[qertbfetchbyrowid] | Row | ||
Note 300637.1 | ORA-600 [qertbfetchbyrowid] | ||
ORA-600[ktbdchk1-bad dscn] | This exception is raised when we are performing a sanity check on the dependent SCN and fail. The dependent scn is greater than the current scn. | Dictionary | |
Note 139165.1 | ORA-600 [ktbdchk1: bad dscn] |
Document History
10-Jun-2010 Add references and correct some links.
07-Sep-2010 Renew links.
References
來自 “ ITPUB部落格 ” ,連結:http://blog.itpub.net/17252115/viewspace-753155/,如需轉載,請註明出處,否則將追究法律責任。
相關文章
- Queries to view Alert Log content And Alert LocationView
- Open Resetlogs Reports Errors ORA-00313 and ORA-00312 to Alert_1366482.1Error
- alert log on Oracle11gOracle
- Oracle11g_alert_logOracle
- alert log檔案的變化
- 資料庫alert報錯:ORA-00202、ORA-15081、ORA-27072資料庫
- 警告日誌檔案alert_.log
- Alert Dialog "Done"按鈕定義.
- Linux : logrotate: ALERT exited abnormally with [1]LinuxlogrotateORM
- [Shell] monitor oracle alert.log file and sendmailOracleAI
- alert_log設定成external table
- Sskgxp_ip: Primary Interface Down In Alert Log
- 熟練使用alert.log日誌
- Manual Log Switching Causing Cannot Allocate New Log in Alert Log_435887.1
- Alert Log中回收站物件操作告警物件
- 8.Monitor oracle alert.log file and sendmailOracleAI
- PMON failed to acquire latch, see PMON dump in alert logAIUI
- Oracle清理trace、alert、aud、listener.log檔案Oracle
- console.log()和alert()區別
- Alert.log shows No Standby Redo Logfiles Of Size 153600 Blocks AvailableBloCAI
- [Shell] Monitor other host oracle instance alert.log and mailOracleAI
- Oracle 警告日誌 (alert log) 中包含哪些內容 ?Oracle
- 9.Monitor other host oracle instance alert.log and mailOracleAI
- 'PMON failed to acquire latch, see PMON dump' in Alert Log-976714.1AIUI
- Failed to start the Clusterware. Last 20 lines of the alert log follow:AIAST
- How to Create a BNE Log For Web Adi Issues and Errors? [ID 817023.1]WebError
- Alert.log shows No stdby Redo Logfiles Of Size 153600 Blocks Available-405836.1BloCAI
- [重慶思莊每日技術分享]-資料庫alert報錯:ORA-00202、ORA-15081、ORA-27072資料庫
- 一個簡單的自動備份alert log指令碼指令碼
- [20150505]關於alert.log檔案.txt
- Alert Log中“Fatal NI connect error 12170”錯誤問題Error
- 從Alert_Log看Oracle資料庫啟動三階段Oracle資料庫
- Metric Collection ErrorsError
- oracle之errorsOracleError
- oracle 之errorsOracleError
- JavaScript alert()JavaScript
- Oracle10g新特性——LOG ERRORS記錄DML錯誤日誌(三)OracleError
- Oracle10g新特性——LOG ERRORS記錄DML錯誤日誌(二)OracleError