HP-unix下安裝11G RAC出現的問題（二）
安裝CRS前，執行環境檢查的錯誤：
安裝CRS之前，我曾做了一個執行前條件檢查，發現有一些錯誤，但是通過安裝發現，這些問題並沒有影響後續的安裝。也就是說屬於正常。
$ ./runcluvfy.sh stage -pre crsinst -n bl870_1,bl870_2 -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "bl870_1"
Destination Node Reachable?
------------------------------------ ------------------------
bl870_1 yes
bl870_2 yes
Result: Node reachability check passed from node "bl870_1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
------------------------------------ ------------------------
bl870_2 passed
bl870_1 passed
Result: User equivalence check passed for user "oracle".
Checking administrative privileges...
Check: Existence of user "oracle"
Node Name User Exists Comment
------------ ------------------------ ------------------------
bl870_2 yes passed
bl870_1 yes passed
Result: User existence check passed for "oracle".
Check: Existence of group "oinstall"
Node Name Status Group ID
------------ ------------------------ ------------------------
bl870_2 exists 106
bl870_1 exists 106
Result: Group existence check passed for "oinstall".
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
---------------- ------------ ------------ ------------ ------------ ------------
bl870_2 yes yes yes yes passed
bl870_1 yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed.
Administrative privileges check passed.
Checking node connectivity...
ERROR:
Network interface information could not be obtained from any of the nodes.
ERROR:
Network interface information could not be obtained from any of the nodes.
Result: Node connectivity check failed.
Checking system requirements for 'crs'...
Check: Total memory
Node Name Available Required Comment
------------ ------------------------ ------------------------ ----------
bl870_2 15.97GB (16746204KB) 1GB (1048576KB) passed
bl870_1 15.97GB (16746204KB) 1GB (1048576KB) passed
Result: Total memory check passed.
Check: Free disk space in "/tmp" dir
Node Name Available Required Comment
------------ ------------------------ ------------------------ ----------
bl870_2 5.8GB (6082288KB) 400MB (409600KB) passed
bl870_1 823.85MB (843624KB) 400MB (409600KB) passed
Result: Free disk space check passed.
Check: Swap space
Node Name Available Required Comment
------------ ------------------------ ------------------------ ----------
bl870_2 23.19GB (24317212KB) 1.5GB (1572864KB) passed
bl870_1 23.19GB (24317212KB) 1.5GB (1572864KB) passed
Result: Swap space check passed.
Check: System architecture
Node Name Available Required Comment
------------ ------------------------ ------------------------ ----------
bl870_2 ia64 ia64 passed
bl870_1 ia64 ia64 passed
Result: System architecture check passed.
Check: Kernel version
Node Name Available Required Comment
------------ ------------------------ ------------------------ ----------
bl870_2 HP-UX B.11.31 HP-UX B.11.31 passed
bl870_1 HP-UX B.11.31 HP-UX B.11.31 passed
Result: Kernel version check passed.
Check: Operating system patch for "PHKL_35900"
Node Name Applied Required Comment
------------ ------------------------ ------------------------ ----------
bl870_2 ERROR: 軟體“PHKL_35900”未在主機“bl870_2:/”上找到。 PHKL_35900 passed
bl870_1 ERROR: 軟體“PHKL_35900”未在主機“bl870_1:/”上找到。 PHKL_35900 passed
Result: Operating system patch check passed for "PHKL_35900".
Check: Operating system patch for "PHKL_36248"
Node Name Applied Required Comment
------------ ------------------------ ------------------------ ----------
bl870_2 ERROR: 軟體“PHKL_36248”未在主機“bl870_2:/”上找到。 PHKL_36248 passed
bl870_1 ERROR: 軟體“PHKL_36248”未在主機“bl870_1:/”上找到。 PHKL_36248 passed
Result: Operating system patch check passed for "PHKL_36248".
Check: Operating system patch for "PHKL_36249"
Node Name Applied Required Comment
------------ ------------------------ ------------------------ ----------
bl870_2 ERROR: 軟體“PHKL_36249”未在主機“bl870_2:/”上找到。 PHKL_36249 passed
bl870_1 ERROR: 軟體“PHKL_36249”未在主機“bl870_1:/”上找到。 PHKL_36249 passed
Result: Operating system patch check passed for "PHKL_36249".
Check: Operating system patch for "PHKL_35936"
Node Name Applied Required Comment
------------ ------------------------ ------------------------ ----------
bl870_2 ERROR: 軟體“PHKL_35936”未在主機“bl870_2:/”上找到。 PHKL_35936 passed
bl870_1 ERROR: 軟體“PHKL_35936”未在主機“bl870_1:/”上找到。 PHKL_35936 passed
Result: Operating system patch check passed for "PHKL_35936".
Check: Package existence for "OS-Core:B.11.31"
Node Name Status Comment
------------------------------ ------------------------------ ----------------
bl870_2 OS-Core:B.11.31 passed
bl870_1 OS-Core:B.11.31 passed
Result: Package existence check passed for "OS-Core:B.11.31".
Check: Package existence for "ACXX:C.06.12"
Node Name Status Comment
------------------------------ ------------------------------ ----------------
bl870_2 failed
bl870_1 failed
Result: Package existence check failed for "ACXX:C.06.12".
Check: Package existence for "C-ANSI-C:C.06.12"
Node Name Status Comment
------------------------------ ------------------------------ ----------------
bl870_2 failed
bl870_1 failed
Result: Package existence check failed for "C-ANSI-C:C.06.12".
Check: Package existence for "FORTRAN90:B.11.31.01"
Node Name Status Comment
------------------------------ ------------------------------ ----------------
bl870_2 failed
bl870_1 failed
Result: Package existence check failed for "FORTRAN90:B.11.31.01".
Check: Package existence for "make:3.81"
Node Name Status Comment
------------------------------ ------------------------------ ----------------
bl870_2 failed
bl870_1 failed
Result: Package existence check failed for "make:3.81".
Check: Package existence for "Perl5-64:D.5.8.8"
Node Name Status Comment
------------------------------ ------------------------------ ----------------
bl870_2 Perl5-64:E.5.8.8.C passed
bl870_1 Perl5-64:E.5.8.8.C passed
Result: Package existence check passed for "Perl5-64:D.5.8.8".
Check: Group existence for "dba"
Node Name Status Comment
------------ ------------------------ ------------------------
bl870_2 exists passed
bl870_1 exists passed
Result: Group existence check passed for "dba".
Check: Group existence for "oinstall"
Node Name Status Comment
------------ ------------------------ ------------------------
bl870_2 exists passed
bl870_1 exists passed
Result: Group existence check passed for "oinstall".
Check: User existence for "nobody"
Node Name Status Comment
------------ ------------------------ ------------------------
bl870_2 exists passed
bl870_1 exists passed
Result: User existence check passed for "nobody".
System requirement failed for 'crs'
Pre-check for cluster services setup was unsuccessful on all the nodes.
$
錯誤一分析：
Checking node connectivity...
ERROR:
Network interface information could not be obtained from any of the nodes.
ERROR:
Network interface information could not be obtained from any of the nodes.
Result: Node connectivity check failed.
這個報錯的原因有多種：
1.網路配置問題。
2.等效性配置問題。
3.主機hosts檔案配置問題。
我這個原因，初步分析是由於我使用的刀片安裝，刀片是共享網路，所以可能會出現這個問題。經過長時間排查，發現我上述配置沒有問題，所以這步錯誤可以被忽略。
錯誤二分析：
Check: Package existence for "ACXX:C.06.12"
Node Name Status Comment
------------------------------ ------------------------------ ----------------
bl870_2 failed
bl870_1 failed
Result: Package existence check failed for "ACXX:C.06.12".
Check: Package existence for "C-ANSI-C:C.06.12"
Node Name Status Comment
------------------------------ ------------------------------ ----------------
bl870_2 failed
bl870_1 failed
Result: Package existence check failed for "C-ANSI-C:C.06.12".
Check: Package existence for "FORTRAN90:B.11.31.01"
Node Name Status Comment
------------------------------ ------------------------------ ----------------
bl870_2 failed
bl870_1 failed
Result: Package existence check failed for "FORTRAN90:B.11.31.01".
Check: Package existence for "make:3.81"
Node Name Status Comment
------------------------------ ------------------------------ ----------------
bl870_2 failed
bl870_1 failed
Result: Package existence check failed for "make:3.81".
類似這樣的錯誤，我真沒有找到原因。一開始我以為是作業系統補丁問題，我問HP要安裝補丁，但是HP沒有，呵呵。如果誰知道這些對應補丁，希望給予交流。
來自 “ ITPUB部落格 ” ，連結：http://blog.itpub.net/8334342/viewspace-607052/，如需轉載，請註明出處，否則將追究法律責任。
相關文章
- HP-unix下安裝11G RAC出現的問題（一）
- HP-unix下安裝11G RAC出現的問題（三）
- HP-unix下安裝11G RAC出現的問題（四）
- AIX 6.1安裝RAC出現時斷時續問題AI
- oracle安裝出現的問題Oracle
- oracle linux 下安裝oracle 11g問題OracleLinux
- RAC環境下安裝部署OWB問題總結
- 安裝出問題
- 安裝jive時出現這樣的問題:
- 也遇到安裝裝置出現怪問題！
- Oracle10g RAC 在Linux AS4.0安裝出現的問題解決OracleLinux
- 常見問題--安裝好後出現新問題
- vmware RHEL AS4 RAC安裝出錯問題總結
- 安裝11g RAC出現PRCT-1011錯誤
- hp-unix 安裝JDK出現異常,以及解決辦法JDK
- 安裝rac時需要注意的問題
- AIX 安裝 11g RACAI
- RedHat 安裝11g racRedhat
- 安裝Oracle RAC 11gOracle
- Laravel 安裝 voyager 出現的資料庫問題Laravel資料庫
- Keepalived安裝後出現的問題總結
- 安裝jivejdon出現的問題,請指點一二
- 安裝oracle+php+apache出現的新問題OraclePHPApache
- linux4.0下安裝oracle RAC（二）LinuxOracle
- linux7上安裝RAC的問題Linux
- [轉]RAC 安裝配置過程中的問題
- RAC安裝配置和使用過程的問題解決方法總結二
- 11G RAC NFS安裝文件NFS
- Sublime Text3安裝包時出現的問題
- RHEL6安裝過程出現的奇怪的問題
- HP-UNIX安裝powerpath
- 安裝oracle 10g rac 的一個問題。Oracle 10g
- 【RAC】 RAC For W2K8R2 安裝--安裝過程中碰到的問題(九)
- composer安裝laravel-socialite出現版本問題Laravel
- 剛剛學習Jdon，安裝出現問題。求助!
- jive3.1.4安裝資料庫出現問題!!!資料庫
- SimpleJdonFrameworkTest安裝完後執行，出現問題Framework
- Mac下安裝PHP遇到的問題MacPHP