【儲存】netapp
記錄netapp首次使用筆記。
1,虛擬機器下掛載netapp光碟
2,安裝netapp
3,netapp初始設定
兩塊網路卡
設定盤數,盤size
使用者名稱密碼
儲存名稱
設定路由,使得可以訪問http圖形介面
4,使用
CIFS
nfs
aggr
shares
volume
lun
[root@localhost sim]# ls
bfs.L bgrun.sh ,disks etc ,mac-address makedisks makespare maytag.L ,nvram runsim.sh ,serialno sessionlogs setup.sh sksidekam ,tapes ,virgo ,virgo_nor
[root@localhost sim]# ./runsim.sh
runsim.sh script. version Script. version 22 (18/Sep/2007)
This session is logged in /home/sim/sessionlogs/log
NetApp Release 7.3.4: Thu May 27 15:43:26 PDT 2010
Copyright (c) 1992-2010 NetApp.
Starting boot on Tue May 24 13:08:07 GMT 2011
Tue May 24 13:08:08 GMT [iomem.init.fail:CRITICAL]: Failed to initialize acceleration card (model name X1938A-R5, serial number 5012345670, part number virgo-simulator) in slot 1.
Tue May 24 13:08:08 GMT [fmm.domain.card.failure:error]: PAM II in slot 1 (model name X1938A-R5, serial number 5012345670, part number virgo-simulator): Flash device failed and needs to be updated or repaired or replaced.
Tue May 24 13:08:16 GMT [fmmb.current.lock.disk:info]: Disk v4.16 is a local HA mailbox disk.
Tue May 24 13:08:16 GMT [fmmb.current.lock.disk:info]: Disk v4.17 is a local HA mailbox disk.
Tue May 24 13:08:16 GMT [fmmb.instStat.change:info]: normal mailbox instance on local side.
Tue May 24 13:08:17 GMT [raid.cksum.replay.summary:info]: Replayed 0 checksum blocks.
Tue May 24 13:08:17 GMT [raid.stripe.replay.summary:info]: Replayed 0 stripes.
sparse volume upgrade done. num vol 0.
Vdisk Snap Table for host:0 is initialized
Tue May 24 13:08:20 GMT [vol.language.unspecified:info]: Language not set on volume vol0. Using language config "C". Use vol lang to set language.
Tue May 24 13:08:20 GMT [rc:notice]: The system was down for 25 seconds
Tue May 24 13:08:28 GMT [dfu.firmwareUpToDate:info]: Firmware is up-to-date on all disk drives
Tue May 24 13:08:28 GMT [sfu.firmwareUpToDate:info]: Firmware is up-to-date on all disk shelves.
Tue May 24 13:08:29 GMT [netif.linkUp:info]: Ethernet ns0: Link up.
add net default: gateway 192.168.1.1
Tue May 24 13:08:29 GMT [snmp.agent.msg.access.denied:warning]: Permission denied for SNMPv3 requests from root. Reason: Password is too short (SNMPv3 requires at least 8 characters).
Tue May 24 13:08:29 GMT [perf.archive.start:info]: Performance archiver started. Sampling 22 objects and 195 counters.
Tue May 24 13:08:31 GMT [mgr.boot.disk_done:info]: NetApp Release 7.3.4 boot complete. Last disk update written at Tue May 24 13:07:53 GMT 2011
Tue May 24 13:08:31 GMT [mgr.boot.reason_ok:notice]: System rebooted after a reboot command.
CIFS local server is running.
Data ONTAP (yellow.)
login: root
Password:
yellow> Tue May 24 13:08:33 GMT [console_login_mgr:info]: root logged in from console
yellow> ?
? fsecurity nis snap
acpadmin ftp options snaplock
aggr halt orouted snapmirror
arp help partner snapvault
backup hostname passwd snmp
cdpd httpstat ping software
cf ifconfig ping6 source
charmap ifstat pktt stats
cifs igroup portset storage
clone ipsec priority sysconfig
config ipspace priv sysstat
date iscsi qtree timezone
df keymgr quota traceroute
disk license rdate traceroute6
disk_fw_update lock rdfile uptime
dns logger reallocate useradmin
download logout reboot version
dump lun restore vfiler
echo man route vif
ems maxfiles routed vlan
environment mt rshstat vol
exportfs nbtstat sasadmin vscan
fcadmin ndmpcopy sasstat wcc
fcp ndmpd savecore wrfile
fcstat ndp sectrace ypcat
file netdiag secureadmin ypgroup
filestats netstat setup ypmatch
flexcache nfs sftp ypwhich
fpolicy nfsstat sis
yellow>
yellow> aggr
The following commands are available; for more information
type "aggr help
add mirror rename split
copy offline restrict status
create online scrub undestroy
destroy options show_space verify
media_scrub
yellow>
yellow> rdfile /etc/exports
#Auto-generated by setup Tue May 24 12:32:36 GMT 2011
/vol/vol0 -sec=sys,ro,rw=192.168.1.4,root=192.168.1.4,nosuid
/vol/vol0/home -sec=sys,rw,root=192.168.1.4,nosuid
/vol/vol1 -sec=sys,rw,root=192.168.1.4:192.168.1.6,nosuid
yellow>
測試:
[root@localhost /]# mount 192.168.1.5:/vol/vol1 /vol1
[root@localhost /]# echo "dsa" > /vol1/haha.txt
[root@localhost /]#
[root@localhost /]# cd /vol1
[root@localhost vol1]# ls -l
total 0
-rwxr-xr-x 1 root bin 52 Mar 12 2010 adsl.txt
-rw-r--r-- 1 root root 4 May 24 05:51 haha.txt
[root@localhost vol1]# more haha.txt
dsa
[root@localhost vol1]#
[root@localhost vol1]# rm adsl.txt
rm: remove regular file `adsl.txt'? y
[root@localhost vol1]#
來自 “ ITPUB部落格 ” ,連結:http://blog.itpub.net/16179598/viewspace-696183/,如需轉載,請註明出處,否則將追究法律責任。
相關文章
- 儲存刪除資料後恢復方法-適用netAPP儲存APP
- Netapp儲存日常檢查及資訊收集APP
- 【儲存資料恢復】NetApp儲存誤刪除的資料恢復案例資料恢復APP
- 儲存NETAPP處於takeover狀態解決方法。APP
- 【儲存資料恢復】NetApp儲存誤刪資料夾的資料恢復案例資料恢復APP
- NetApp資料恢復—NetApp儲存池中劃分的卷丟失的資料恢復案例APP資料恢復
- ESXI5.5主機新增共享儲存(netapp fas8040)操作步驟APP
- NetApp FAS2240-4儲存刪除檔案資料恢復APP資料恢復
- NetApp資料恢復-未知原因導致NetApp儲存內卷丟失,卷內虛擬機器不可訪問APP資料恢復虛擬機
- 【儲存資料恢復案例】Netapp誤操作刪除lun的資料恢復資料恢復APP
- 【伺服器資料恢復】NetApp儲存誤刪除的資料恢復案例伺服器資料恢復APP
- 塊儲存 檔案儲存 物件儲存物件
- 【Netapp】NetApp常用命令APP
- 行式儲存 列式儲存
- 儲存—物件儲存_Minio物件
- 自動儲存、靜態儲存和動態儲存
- MyISAM 儲存引擎,Innodb 儲存引擎儲存引擎
- 資料儲存--檔案儲存
- 儲存
- 物件儲存 vs 檔案儲存 vs 塊儲存,選哪個?物件
- 【伺服器資料恢復】NetApp儲存中lun被誤刪除的資料恢復過程伺服器資料恢復APP
- 儲存過程與儲存函式儲存過程儲存函式
- PostgreSQL儲存智慧-空間聚集儲存SQL
- Redis儲存結構以及儲存格式Redis
- netapp NFSAPPNFS
- 聚焦資料時代新儲存需求,浪潮儲存的新儲存之道
- 雲原生儲存詳解:容器儲存與 K8s 儲存卷K8S
- mysql儲存函過程和儲存函式都屬於儲存程式MySql儲存函式
- 物件儲存,未來儲存新潮流物件
- Android儲存(2)– 介面卡儲存Android
- Flutter持久化儲存之檔案儲存Flutter持久化
- 容器附加儲存(CAS)是雲原生儲存
- 儲存引擎儲存引擎
- 照片儲存
- 儲存管理
- 物件儲存物件
- 儲存Word
- 【儲存】EMC