PostgreSQLGUC引數級別介紹
標籤
PostgreSQL , 引數 , 引數級別
背景
在新增GUC引數時，需要注意你新增的引數屬於什麼類別的引數。
例如如果你想讓普通使用者能隨時修改它，那麼你需要將引數級別設定為PGC_USERSET。如果你想讓超級使用者能線上修改它，那麼你需要將它設定為PGC_SUSET。如果你想讓它能夠在修改配置引數並通過訊號生效，那麼需要設定為PGC_SIGHUP。
GUC引數相關的程式碼如下
src/backend/utils/misc/guc.c
引數級別介紹
/*
* Displayable names for context types (enum GucContext)
*
* Note: these strings are deliberately not localized.
*/
const char *const GucContext_Names[] =
{
/* PGC_INTERNAL */ "internal", 編譯資料庫叢集時設定
/* PGC_POSTMASTER */ "postmaster", 只能啟動是設定
/* PGC_SIGHUP */ "sighup", 允許通過修改配置檔案，並通過SIGHUP訊號更新引數。
/* PGC_SU_BACKEND */ "superuser-backend", 超級使用者的backend級引數
/* PGC_BACKEND */ "backend", 普通使用者的backend級引數
/* PGC_SUSET */ "superuser", 允許超級使用者線上修改的引數
/* PGC_USERSET */ "user" 允許普通使用者線上修改的引數
};
如何檢視所有引數級別
postgres=# select context,name,short_desc from pg_settings order by context,category,name;
context | name | short_desc
-------------------+-------------------------------------+-------------------------------------------------------------------------------------------------------------------------------
backend | ignore_system_indexes | Disables reading from system indexes.
backend | post_auth_delay | Waits N seconds on connection startup after authentication.
internal | lc_collate | Shows the collation order locale.
internal | lc_ctype | Shows the character classification and case conversion locale.
internal | server_encoding | Sets the server (database) character set encoding.
internal | block_size | Shows the size of a disk block.
internal | data_checksums | Shows whether data checksums are turned on for this cluster.
internal | debug_assertions | Shows whether the running server has assertion checks enabled.
internal | integer_datetimes | Datetimes are integer based.
internal | max_function_args | Shows the maximum number of function arguments.
internal | max_identifier_length | Shows the maximum identifier length.
internal | max_index_keys | Shows the maximum number of index keys.
internal | segment_size | Shows the number of pages per disk file.
internal | server_version | Shows the server version.
internal | server_version_num | Shows the server version as an integer.
internal | wal_block_size | Shows the block size in the write ahead log.
internal | wal_segment_size | Shows the number of pages per write ahead log segment.
postmaster | autovacuum_freeze_max_age | Age at which to autovacuum a table to prevent transaction ID wraparound.
postmaster | autovacuum_max_workers | Sets the maximum number of simultaneously running autovacuum worker processes.
postmaster | autovacuum_multixact_freeze_max_age | Multixact age at which to autovacuum a table to prevent multixact wraparound.
postmaster | shared_preload_libraries | Lists shared libraries to preload into server.
postmaster | bonjour | Enables advertising the server via Bonjour.
postmaster | bonjour_name | Sets the Bonjour service name.
postmaster | listen_addresses | Sets the host name or IP address(es) to listen to.
postmaster | max_connections | Sets the maximum number of concurrent connections.
postmaster | port | Sets the TCP port the server listens on.
postmaster | superuser_reserved_connections | Sets the number of connection slots reserved for superusers.
postmaster | unix_socket_directories | Sets the directories where Unix-domain sockets will be created.
postmaster | unix_socket_group | Sets the owning group of the Unix-domain socket.
postmaster | unix_socket_permissions | Sets the access permissions of the Unix-domain socket.
postmaster | allow_system_table_mods | Allows modifications of the structure of system tables.
postmaster | config_file | Sets the server`s main configuration file.
postmaster | data_directory | Sets the server`s data directory.
postmaster | external_pid_file | Writes the postmaster PID to the specified file.
postmaster | hba_file | Sets the server`s "hba" configuration file.
postmaster | ident_file | Sets the server`s "ident" configuration file.
postmaster | max_locks_per_transaction | Sets the maximum number of locks per transaction.
postmaster | max_pred_locks_per_transaction | Sets the maximum number of predicate locks per transaction.
postmaster | cluster_name | Sets the name of the cluster, which is included in the process title.
postmaster | track_commit_timestamp | Collects transaction commit time.
postmaster | max_replication_slots | Sets the maximum number of simultaneously defined replication slots.
postmaster | max_wal_senders | Sets the maximum number of simultaneously running WAL sender processes.
postmaster | hot_standby | Allows connections and queries during recovery.
postmaster | max_logical_replication_workers | Maximum number of logical replication worker processes.
postmaster | event_source | Sets the application name used to identify PostgreSQL messages in the event log.
postmaster | logging_collector | Start a subprocess to capture stderr output and/or csvlogs into log files.
postmaster | max_worker_processes | Maximum number of concurrent worker processes.
postmaster | old_snapshot_threshold | Time before a snapshot is too old to read pages changed after the snapshot was taken.
postmaster | max_files_per_process | Sets the maximum number of simultaneously open files for each server process.
postmaster | dynamic_shared_memory_type | Selects the dynamic shared memory implementation used.
postmaster | huge_pages | Use of huge pages on Linux.
postmaster | max_prepared_transactions | Sets the maximum number of simultaneously prepared transactions.
postmaster | shared_buffers | Sets the number of shared memory buffers used by the server.
postmaster | track_activity_query_size | Sets the size reserved for pg_stat_activity.query, in bytes.
postmaster | archive_mode | Allows archiving of WAL files using archive_command.
postmaster | wal_buffers | Sets the number of disk-page buffers in shared memory for WAL.
postmaster | wal_level | Set the level of information written to the WAL.
postmaster | wal_log_hints | Writes full pages to WAL when first modified after a checkpoint, even for a non-critical modifications.
sighup | autovacuum | Starts the autovacuum subprocess.
sighup | autovacuum_analyze_scale_factor | Number of tuple inserts, updates, or deletes prior to analyze as a fraction of reltuples.
sighup | autovacuum_analyze_threshold | Minimum number of tuple inserts, updates, or deletes prior to analyze.
sighup | autovacuum_naptime | Time to sleep between autovacuum runs.
sighup | autovacuum_vacuum_cost_delay | Vacuum cost delay in milliseconds, for autovacuum.
sighup | autovacuum_vacuum_cost_limit | Vacuum cost amount available before napping, for autovacuum.
sighup | autovacuum_vacuum_scale_factor | Number of tuple updates or deletes prior to vacuum as a fraction of reltuples.
sighup | autovacuum_vacuum_threshold | Minimum number of tuple updates or deletes prior to vacuum.
sighup | authentication_timeout | Sets the maximum allowed time to complete client authentication.
sighup | db_user_namespace | Enables per-database user names.
sighup | krb_caseins_users | Sets whether Kerberos and GSSAPI user names should be treated as case-insensitive.
sighup | krb_server_keyfile | Sets the location of the Kerberos server key file.
sighup | ssl | Enables SSL connections.
sighup | ssl_ca_file | Location of the SSL certificate authority file.
sighup | ssl_cert_file | Location of the SSL server certificate file.
sighup | ssl_ciphers | Sets the list of allowed SSL ciphers.
sighup | ssl_crl_file | Location of the SSL certificate revocation list file.
sighup | ssl_dh_params_file | Location of the SSL DH params file.
sighup | ssl_ecdh_curve | Sets the curve to use for ECDH.
sighup | ssl_key_file | Location of the SSL server private key file.
sighup | ssl_prefer_server_ciphers | Give priority to server ciphersuite order.
sighup | pre_auth_delay | Waits N seconds on connection startup before authentication.
sighup | trace_recovery_messages | Enables logging of recovery-related debugging information.
sighup | restart_after_crash | Reinitialize server after backend crash.
sighup | max_pred_locks_per_page | Sets the maximum number of predicate-locked tuples per page.
sighup | max_pred_locks_per_relation | Sets the maximum number of predicate-locked pages and tuples per relation.
sighup | synchronous_standby_names | Number of synchronous standbys and list of names of potential synchronous ones.
sighup | vacuum_defer_cleanup_age | Number of transactions by which VACUUM and HOT cleanup should be deferred, if any.
sighup | wal_keep_segments | Sets the number of WAL files held for standby servers.
sighup | wal_sender_timeout | Sets the maximum time to wait for WAL replication.
sighup | hot_standby_feedback | Allows feedback from a hot standby to the primary that will avoid query conflicts.
sighup | max_standby_archive_delay | Sets the maximum delay before canceling queries when a hot standby server is processing archived WAL data.
sighup | max_standby_streaming_delay | Sets the maximum delay before canceling queries when a hot standby server is processing streamed WAL data.
sighup | wal_receiver_status_interval | Sets the maximum interval between WAL receiver status reports to the primary.
sighup | wal_receiver_timeout | Sets the maximum wait time to receive data from the primary.
sighup | wal_retrieve_retry_interval | Sets the time to wait before retrying to retrieve WAL after a failed attempt.
sighup | max_sync_workers_per_subscription | Maximum number of table synchronization workers per subscription.
sighup | log_autovacuum_min_duration | Sets the minimum execution time above which autovacuum actions will be logged.
sighup | log_checkpoints | Logs each checkpoint.
sighup | log_hostname | Logs the host name in the connection logs.
sighup | log_line_prefix | Controls information prefixed to each log line.
sighup | log_timezone | Sets the time zone to use in log messages.
sighup | log_destination | Sets the destination for server log output.
sighup | log_directory | Sets the destination directory for log files.
sighup | log_file_mode | Sets the file permissions for log files.
sighup | log_filename | Sets the file name pattern for log files.
sighup | log_rotation_age | Automatic log file rotation will occur after N minutes.
sighup | log_rotation_size | Automatic log file rotation will occur after N kilobytes.
sighup | log_truncate_on_rotation | Truncate existing log files of same name during log rotation.
sighup | syslog_facility | Sets the syslog "facility" to be used when syslog enabled.
sighup | syslog_ident | Sets the program name used to identify PostgreSQL messages in syslog.
sighup | syslog_sequence_numbers | Add sequence number to syslog messages to avoid duplicate suppression.
sighup | syslog_split_messages | Split messages sent to syslog by lines and to fit into 1024 bytes.
sighup | bgwriter_delay | Background writer sleep time between rounds.
sighup | bgwriter_flush_after | Number of pages after which previously performed writes are flushed to disk.
sighup | bgwriter_lru_maxpages | Background writer maximum number of LRU pages to flush per round.
sighup | bgwriter_lru_multiplier | Multiple of the average buffer usage to free per round.
sighup | autovacuum_work_mem | Sets the maximum memory to be used by each autovacuum worker process.
sighup | stats_temp_directory | Writes temporary statistics files to the specified directory.
sighup | archive_command | Sets the shell command that will be called to archive a WAL file.
sighup | archive_timeout | Forces a switch to the next WAL file if a new file has not been started within N seconds.
sighup | checkpoint_completion_target | Time spent flushing dirty buffers during checkpoint, as fraction of checkpoint interval.
sighup | checkpoint_flush_after | Number of pages after which previously performed writes are flushed to disk.
sighup | checkpoint_timeout | Sets the maximum time between automatic WAL checkpoints.
sighup | checkpoint_warning | Enables warnings if checkpoint segments are filled more frequently than this.
sighup | max_wal_size | Sets the WAL size that triggers a checkpoint.
sighup | min_wal_size | Sets the minimum size to shrink the WAL to.
sighup | fsync | Forces synchronization of updates to disk.
sighup | full_page_writes | Writes full pages to WAL when first modified after a checkpoint.
sighup | wal_sync_method | Selects the method used for forcing WAL updates to disk.
sighup | wal_writer_delay | Time between WAL flushes performed in the WAL writer.
sighup | wal_writer_flush_after | Amount of WAL written out by WAL writer that triggers a flush.
superuser | lc_messages | Sets the language in which messages are displayed.
superuser | dynamic_library_path | Sets the path for dynamically loadable modules.
superuser | session_preload_libraries | Lists shared libraries to preload into each backend.
superuser | session_replication_role | Sets the session`s behavior for triggers and rewrite rules.
superuser | ignore_checksum_failure | Continues processing after a checksum failure.
superuser | wal_consistency_checking | Sets the WAL resource managers for which WAL consistency checks are done.
superuser | zero_damaged_pages | Continues processing past damaged page headers.
superuser | deadlock_timeout | Sets the time to wait on a lock before checking for deadlock.
superuser | update_process_title | Updates the process title to show the active SQL command.
superuser | log_duration | Logs the duration of each completed SQL statement.
superuser | log_error_verbosity | Sets the verbosity of logged messages.
superuser | log_lock_waits | Logs long lock waits.
superuser | log_replication_commands | Logs each replication command.
superuser | log_statement | Sets the type of statements logged.
superuser | log_temp_files | Log the use of temporary files larger than this number of kilobytes.
superuser | log_min_duration_statement | Sets the minimum execution time above which statements will be logged.
superuser | log_min_error_statement | Causes all statements generating error at or above this level to be logged.
superuser | log_min_messages | Sets the message levels that are logged.
superuser | temp_file_limit | Limits the total size of all temporary files used by each process.
superuser | max_stack_depth | Sets the maximum stack depth, in kilobytes.
superuser | log_executor_stats | Writes executor performance statistics to the server log.
superuser | log_parser_stats | Writes parser performance statistics to the server log.
superuser | log_planner_stats | Writes planner performance statistics to the server log.
superuser | log_statement_stats | Writes cumulative performance statistics to the server log.
superuser | track_activities | Collects information about executing commands.
superuser | track_counts | Collects statistics on database activity.
superuser | track_functions | Collects function-level statistics on database activity.
superuser | track_io_timing | Collects timing statistics for database I/O activity.
superuser | lo_compat_privileges | Enables backward compatibility mode for privilege checks on large objects.
superuser | commit_delay | Sets the delay in microseconds between transaction commit and flushing WAL to disk.
superuser | wal_compression | Compresses full-page writes written in WAL file.
superuser-backend | log_connections | Logs each successful connection.
superuser-backend | log_disconnections | Logs end of a session, including duration.
user | DateStyle | Sets the display format for date and time values.
user | IntervalStyle | Sets the display format for interval values.
user | TimeZone | Sets the time zone for displaying and interpreting time stamps.
user | client_encoding | Sets the client`s character set encoding.
user | default_text_search_config | Sets default text search configuration.
user | extra_float_digits | Sets the number of digits displayed for floating-point values.
user | lc_monetary | Sets the locale for formatting monetary amounts.
user | lc_numeric | Sets the locale for formatting numbers.
user | lc_time | Sets the locale for formatting date and time values.
user | timezone_abbreviations | Selects a file of time zone abbreviations.
user | gin_fuzzy_search_limit | Sets the maximum allowed result for exact search by GIN.
user | tcp_keepalives_count | Maximum number of TCP keepalive retransmits.
user | tcp_keepalives_idle | Time between issuing TCP keepalives.
user | tcp_keepalives_interval | Time between TCP keepalive retransmits.
user | local_preload_libraries | Lists unprivileged shared libraries to preload into each backend.
user | bytea_output | Sets the output format for bytea.
user | check_function_bodies | Check function bodies during CREATE FUNCTION.
user | default_tablespace | Sets the default tablespace to create tables and indexes in.
user | default_transaction_deferrable | Sets the default deferrable status of new transactions.
user | default_transaction_isolation | Sets the transaction isolation level of each new transaction.
user | default_transaction_read_only | Sets the default read-only status of new transactions.
user | gin_pending_list_limit | Sets the maximum size of the pending list for GIN index.
user | idle_in_transaction_session_timeout | Sets the maximum allowed duration of any idling transaction.
user | lock_timeout | Sets the maximum allowed duration of any wait for a lock.
user | search_path | Sets the schema search order for names that are not schema-qualified.
user | statement_timeout | Sets the maximum allowed duration of any statement.
user | temp_tablespaces | Sets the tablespace(s) to use for temporary tables and sort files.
user | transaction_deferrable | Whether to defer a read-only serializable transaction until it can be executed with no possible serialization failures.
user | transaction_isolation | Sets the current transaction`s isolation level.
user | transaction_read_only | Sets the current transaction`s read-only status.
user | vacuum_freeze_min_age | Minimum age at which VACUUM should freeze a table row.
user | vacuum_freeze_table_age | Age at which VACUUM should scan whole table to freeze tuples.
user | vacuum_multixact_freeze_min_age | Minimum age at which VACUUM should freeze a MultiXactId in a table row.
user | vacuum_multixact_freeze_table_age | Multixact age at which VACUUM should scan whole table to freeze tuples.
user | xmlbinary | Sets how binary values are to be encoded in XML.
user | xmloption | Sets whether XML data in implicit parsing and serialization operations is to be considered as documents or content fragments.
user | password_encryption | Encrypt passwords.
user | row_security | Enable row security.
user | trace_notify | Generates debugging output for LISTEN and NOTIFY.
user | trace_sort | Emit information about resource usage in sorting.
user | exit_on_error | Terminate session on any error.
user | geqo | Enables genetic query optimization.
user | geqo_effort | GEQO: effort is used to set the default for other GEQO parameters.
user | geqo_generations | GEQO: number of iterations of the algorithm.
user | geqo_pool_size | GEQO: number of individuals in the population.
user | geqo_seed | GEQO: seed for random path selection.
user | geqo_selection_bias | GEQO: selective pressure within the population.
user | geqo_threshold | Sets the threshold of FROM items beyond which GEQO is used.
user | constraint_exclusion | Enables the planner to use constraints to optimize queries.
user | cursor_tuple_fraction | Sets the planner`s estimate of the fraction of a cursor`s rows that will be retrieved.
user | default_statistics_target | Sets the default statistics target.
user | force_parallel_mode | Forces use of parallel query facilities.
user | from_collapse_limit | Sets the FROM-list size beyond which subqueries are not collapsed.
user | join_collapse_limit | Sets the FROM-list size beyond which JOIN constructs are not flattened.
user | cpu_index_tuple_cost | Sets the planner`s estimate of the cost of processing each index entry during an index scan.
user | cpu_operator_cost | Sets the planner`s estimate of the cost of processing each operator or function call.
user | cpu_tuple_cost | Sets the planner`s estimate of the cost of processing each tuple (row).
user | effective_cache_size | Sets the planner`s assumption about the size of the disk cache.
user | min_parallel_index_scan_size | Sets the minimum amount of index data for a parallel scan.
user | min_parallel_table_scan_size | Sets the minimum amount of table data for a parallel scan.
user | parallel_setup_cost | Sets the planner`s estimate of the cost of starting up worker processes for parallel query.
user | parallel_tuple_cost | Sets the planner`s estimate of the cost of passing each tuple (row) from worker to master backend.
user | random_page_cost | Sets the planner`s estimate of the cost of a nonsequentially fetched disk page.
user | seq_page_cost | Sets the planner`s estimate of the cost of a sequentially fetched disk page.
user | enable_bitmapscan | Enables the planner`s use of bitmap-scan plans.
user | enable_gathermerge | Enables the planner`s use of gather merge plans.
user | enable_hashagg | Enables the planner`s use of hashed aggregation plans.
user | enable_hashjoin | Enables the planner`s use of hash join plans.
user | enable_indexonlyscan | Enables the planner`s use of index-only-scan plans.
user | enable_indexscan | Enables the planner`s use of index-scan plans.
user | enable_material | Enables the planner`s use of materialization.
user | enable_mergejoin | Enables the planner`s use of merge join plans.
user | enable_nestloop | Enables the planner`s use of nested-loop join plans.
user | enable_parallelappend | Enables the planner`s use of parallel append plans.
user | enable_seqscan | Enables the planner`s use of sequential-scan plans.
user | enable_sort | Enables the planner`s use of explicit sort steps.
user | enable_tidscan | Enables the planner`s use of TID scan plans.
user | application_name | Sets the application name to be reported in statistics and logs.
user | debug_pretty_print | Indents parse and plan tree displays.
user | debug_print_parse | Logs each query`s parse tree.
user | debug_print_plan | Logs each query`s execution plan.
user | debug_print_rewritten | Logs each query`s rewritten parse tree.
user | client_min_messages | Sets the message levels that are sent to the client.
user | backend_flush_after | Number of pages after which previously performed writes are flushed to disk.
user | effective_io_concurrency | Number of simultaneous requests that can be handled efficiently by the disk subsystem.
user | max_parallel_workers | Sets the maximum number of parallel workers than can be active at one time.
user | max_parallel_workers_per_gather | Sets the maximum number of parallel processes per executor node.
user | vacuum_cost_delay | Vacuum cost delay in milliseconds.
user | vacuum_cost_limit | Vacuum cost amount available before napping.
user | vacuum_cost_page_dirty | Vacuum cost for a page dirtied by vacuum.
user | vacuum_cost_page_hit | Vacuum cost for a page found in the buffer cache.
user | vacuum_cost_page_miss | Vacuum cost for a page not found in the buffer cache.
user | maintenance_work_mem | Sets the maximum memory to be used for maintenance operations.
user | replacement_sort_tuples | Sets the maximum number of tuples to be sorted using replacement selection.
user | temp_buffers | Sets the maximum number of temporary buffers used by each session.
user | work_mem | Sets the maximum memory to be used for query workspaces.
user | transform_null_equals | Treats "expr=NULL" as "expr IS NULL".
user | array_nulls | Enable input of NULL elements in arrays.
user | backslash_quote | Sets whether "`" is allowed in string literals.
user | default_with_oids | Create new tables with OIDs by default.
user | escape_string_warning | Warn about backslash escapes in ordinary string literals.
user | operator_precedence_warning | Emit a warning for constructs that changed meaning since PostgreSQL 9.4.
user | quote_all_identifiers | When generating SQL fragments, quote all identifiers.
user | standard_conforming_strings | Causes `...` strings to treat backslashes literally.
user | synchronize_seqscans | Enable synchronized sequential scans.
user | commit_siblings | Sets the minimum concurrent open transactions before performing commit_delay.
user | synchronous_commit | Sets the current transaction`s synchronization level.
(270 rows)
相關文章
- Oracle 靜態引數與動態引數型別介紹Oracle型別
- docker 引數介紹Docker
- gcc 常用引數介紹GC
- HRMS Function 引數介紹Function
- Oracle 各版本引數/隱藏引數 介紹Oracle
- MongoDB啟動引數介紹MongoDB
- margin引數簡單介紹
- margin 引數簡單介紹
- ipchains引數介紹(轉)AI
- Oracle expdp impdp dump引數介紹Oracle
- eclipse 啟動引數介紹Eclipse
- 【儲存】megacli 常用引數介紹
- javascript bind()第一個引數以後引數介紹JavaScript
- 次級成本要素型別介紹型別
- mysql一些引數的介紹MySql
- ORACLE推導引數Derived Parameter介紹Oracle
- 【體系結構】Oracle引數介紹Oracle
- 資料表建立引數介紹（一）
- 資料表建立引數介紹（二）
- 資料表建立引數介紹（三）
- 資料表建立引數介紹（四）
- oracle 塊基本引數介紹(英文) (zt)Oracle
- Oracle sqlplus prelim 引數介紹OracleSQL
- mysqldump中skip-tz-utc引數介紹MySql
- ORACLE初始化引數檔案介紹Oracle
- linux的vm相關引數介紹Linux
- Oracle 優化引數 optimizer_mode 介紹Oracle優化
- 領存工業級Z3 SAS固態硬碟硬體引數介紹硬碟
- 龍芯1A處理器引數介紹
- java基礎(九) 可變引數列表介紹Java
- CoreImage濾鏡效果及API引數介紹（五）API
- Oracle 最佳化引數 optimizer_mode 介紹Oracle
- Spring Security方法級別授權使用介紹Spring
- MongoDB資料庫級別的鎖粒度介紹MongoDB資料庫
- 介紹tomcat Connector 引數優化說明Tomcat優化
- 聯發科MT7610EN WiFi晶片引數介紹WiFi晶片
- mysql二進位制日誌的引數介紹MySql
- oracle impdp network_link引數使用介紹Oracle