OUI-25031 解決

from:http://lizhichun68.blog.163.com/blog/static/862384920108655454282/

10g 的ocr安裝
類似於9i,但在安裝完成後，執行指令碼時，第二個節點要用ROOT執行VIPCA,具體的操作如下：在當前的圖形介面下：
$su root
#./vipca

按提示完成，但使用外部圖形工具時，檢查到oracle Cluster Verification Utility時報錯，OUI-25031錯誤，如下：
（注意：你千萬不要點選next忽略過去），解決辦法如下

這是錯誤資訊
INFO: Configuration assistant "Oracle Cluster Verification Utility" failed
-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to /orabase/product/10.2
Configuration directory is set to /orabase/product/10.2/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/orabase/product/10.2/cfgtoollogs/configToolFailedCommands" script. contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script. with passwords (if any) before executing the same.
-----------------------------------------------------------------------------
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.

檢視vip有沒有拼通
ping rac1-vip
ping rac2-vip
一般來說，是正常拼通的。問題可能跟hostname有關，檢視/etc/sysconfig/network檔案，結果發現hostname = local.......
此時，你把hostname改成你此節點上的主機名，如hostname=rac1，
此時，你再次執行“Retry”
再次去檢測"Oracle Cluster Verification Utility",這時一般會成功。