[轉帖]10 Hardware Components of Oracle Exadata

济南小老虎發表於2024-05-03
Oracle
https://docs.oracle.com/en/engineered-systems/exadata-database-machine/dbmso/hardware-components-exadata-db-machine.html#GUID-EBA9369F-A2AB-449F-A361-40F48A5B37C2

Oracle Exadata consists of database servers, storage servers, and the network components to connect to your network.

Oracle Exadata is available in flexible configurations that consist of a number of database and storage servers up to the capacity of the rack as defined using OECA. Oracle Exadata is also available in specific configurations, such as a full rack, half rack, quarter rack or eighth rack.

  • Oracle Exadata Database Machine Hardware Components by Model
    These tables list the components included for each type of Oracle Exadata Database Machine model and configuration.
  • Oracle Exadata Database Server Hardware Components
    Each Oracle Exadata Database Machine contains multiple database servers.
  • Oracle Exadata Storage Server Hardware Components
    Each Oracle Exadata Database Machine contains multiple storage servers.
  • Spares Kit Components for Oracle Exadata Database Machine

Parent topic: Hardware Components

10.1 Oracle Exadata Database Machine Hardware Components by Model

These tables list the components included for each type of Oracle Exadata Database Machine model and configuration.

In the following tables, for raw capacity, 1 GB = 1 billion bytes. Capacity is calculated using normal space terminology of 1 TB = 1024 * 1024 * 1024 * 1024 bytes. Actual formatted capacity is less.

Oracle Exadata Storage Server variants are abbreviated as follows:

  • HC - High Capacity
  • EF - Extreme Flash
  • XT - Extended

The following table describes the flexible configurations for X6-2 and later systems.

Table 10-1 Oracle Exadata Database Machine Flexible Configurations

ModelBase ConfigurationFlexible ConfigurationsOracle Exadata Database Machine Eighth Rack

Oracle Exadata Database Machine X10M

  • 2 Exadata X10M database servers

  • 3 Exadata X10M storage servers

  • 2 RoCE Network Fabric Switches

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 Management Network Switch

  • Raw flash capacity: 450.2 TB for EF, or 81.6 TB for HC

  • Raw hard disk capacity: 792 TB for HC
  • Maximum of 19 servers (database and storage) in a rack

  • Minimum of 2 database servers, maximum of 15 database servers

  • Minimum of 3 HC or EF storage servers, can add 2 or more XT servers or additional HC or EF storage servers for a maximum of 17 storage servers

  • An extra RoCE Network Fabric Switch can be installed for combining racks.

  • Extra network cards can be installed if you require additional connectivity for client networks, or for separate networks.

  • A memory expansion kit can be installed to increase memory capacity for the database servers. Memory expansion kit is not available for the storage servers.

  • A disk expansion kit can be used to upgrade disk storage of the database server, which increases the usable disk capacity of the database server, for use by Oracle Homes or other local disk requirements.

Not applicable

Oracle Exadata Database Machine X9M-2

  • 2 Exadata X9M-2 database servers

  • 3 Exadata X9M-2 storage servers

  • 2 RoCE Network Fabric Switches

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 Management Network Switch

  • Raw flash capacity: 153.6 TB for EF, or 76.8 TB for HC

  • Raw hard disk capacity: 648 TB for HC

  • Persistent memory capacity: 4.5 TB
  • Maximum of 22 servers (database and storage) in a rack

  • Minimum of 2 database servers, maximum of 19 database servers

  • Minimum of 3 HC or EF storage servers, can add 2 or more XT servers or additional HC or EF storage servers for a maximum of 18 storage servers

  • An extra RoCE Network Fabric Switch can be installed for combining racks.

  • An extra network card can be installed if you require additional connectivity for client networks, or for a separate network.

  • A memory expansion kit can be installed to increase memory capacity for the database servers. Memory expansion kit is not available for the storage servers.

  • A disk expansion kit can be used to upgrade disk storage of the database server, which increases the usable disk capacity of the database server, for use by Oracle Homes or other local disk requirements.

  • 2 Exadata X9M-2 database servers. Each server has 1 x 32-core processor with all 32 cores enabled

  • 3 Exadata X9M-2 storage servers. Each server has 2 x 16-core processors and contains the following storage:

    • 6 x 18 TB 7,200 RPM high capacity disks.

    • 2 PCI flash cards, each with 6.4 TB of raw flash storage.

    • 768 GB of persistent memory

  • Expand the storage by:

    • Adding one or more X9M-2 eighth (1/8) rack storage server(s) to the existing disk group. Licenses required.
    • Or, by adding a minimum of three X9M storage servers (eighth or fully populated) for a new disk group.

  • 2 RoCE Network Fabric Switches

  • 2 redundant PDUs (1- phase or 3- phase, high voltage or low voltage)

  • 1 Management Network Switch

  • Raw flash capacity: 38.4 TB

  • Raw hard disk capacity: 324 TB

  • Persistent memory capacity: 2.3 TB

Oracle Exadata Database Machine X8M-2

  • 2 Exadata X8M-2 database servers

  • 3 Exadata X8M-2 storage servers

  • 2 RoCE Network Fabric Switches

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 Management Network Switch

  • Raw flash capacity: 153.6 TB for EF, or 76.8 TB for HC

  • Raw hard disk capacity: 504 TB for HC
  • Maximum of 22 servers (database and storage) in a rack

  • Minimum of 2 database servers, maximum of 19 database servers

  • Minimum of 3 HC or EF storage servers, can add 2 or more XT servers or additional HC or EF storage servers for a maximum of 18 storage servers

  • An extra RoCE Network Fabric Switch can be installed for combining racks.

  • An extra network card can be installed if you require additional connectivity for client networks, or for a separate network.

  • A memory expansion kit can be installed to increase memory capacity for the database servers. Memory expansion kit is not available for the storage servers.

  • A disk expansion kit can be used to upgrade disk storage of the database server, which increases the usable disk capacity of the database server, for use by Oracle Homes or other local disk requirements.

  • 2 Exadata X8M-2 database servers. Each server has 1x 24-core processor with all 24-cores enabled

  • 3 Exadata X8M-2 storage servers. Each server has 2 x 16-core processors, each with 8 cores enabled.

    • HC storage servers have 2 PCI flash cards, each with 6.4 TB (raw) Smart Flash Cache and 6 x 14 TB 7,200 RPM high capacity disks.

    • EF storage servers have 4 PCI flash cards, each with 6.4 TB (raw) storage.

  • Expand the storage by:

    • Adding one or more X8M-2 eighth (1/8) rack storage server(s) to the existing disk group. Licenses required.
    • Or, by adding a minimum of three X8M storage servers (eighth or fully populated) for a new disk group.

  • 2 RoCE Network Fabric Switches

  • 2 redundant PDUs (1- phase or 3- phase, high voltage or low voltage)

  • 1 Management Network Switch

  • Raw flash capacity: 76.8 TB for EF, or 38.4 TB for HC

  • Raw hard disk capacity: 180 TB for HC disks

Oracle Exadata Database Machine X8-2

  • 2 Exadata X8-2 database servers

  • 3 Exadata X8-2 storage servers

  • 2 Sun Datacenter InfiniBand Switch 36

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Nexus 9348 Ethernet switch

  • Raw flash capacity: 153.6 TB for EF, or 76.8 TB for HC

  • Raw hard disk capacity: 504 TB for HC
  • Maximum of 22 servers (database and storage) in a rack

  • Minimum of 2 database servers, maximum of 19 database servers

  • Minimum of 3 HC or EF storage servers, can add 2 or more XT servers or additional HC or EF storage servers for a maximum of 18 storage servers

  • An extra InfiniBand leaf switch can be installed for combining racks.

  • An extra network card can be installed if you require additional connectivity for client networks, or for a separate network.

  • A memory expansion kit can be installed to increase memory capacity for the database or storage servers. Memory expansion kit is not available for the XT storage servers.

  • A disk expansion kit can be used to upgrade disk storage of the database server, which increases the usable disk capacity of the database server, for use by Oracle Homes or other local disk requirements.

  • 2 Exadata X8-2 database servers. Each server has 1x 24-core processor with all 24-cores enabled

  • 3 Exadata X8-2 storage servers. Each server has 2 x 16-core processors, each with 8 cores enabled.

    • HC storage servers have 2 PCI flash cards, each with 6.4 TB (raw) Smart Flash Cache and 6 x 14 TB 7,200 RPM high capacity disks.

    • EF storage servers have 4 PCI flash cards, each with 6.4 TB (raw) storage.

  • 2 Sun Datacenter InfiniBand Switch 36 switches

  • 2 redundant PDUs (1- phase or 3- phase, high voltage or low voltage)

  • 1 48-port Cisco Nexus 9348 Ethernet switch

  • Raw flash capacity: 76.8 TB for EF, or 38.4 TB for HC

  • Raw hard disk capacity: 180 TB for HC disks

Oracle Exadata Database Machine X7-2

  • 2 Exadata X7-2 database servers

  • 3 Exadata X7-2 storage servers

  • 2 Sun Datacenter InfiniBand Switch 36

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Nexus 93108-1G or 9348 Ethernet switch

  • Raw flash capacity: 153.6 TB for EF, or 76.8 TB for HC

  • Raw hard disk capacity: 360 TB for HC
  • Maximum of 22 servers (database and storage) in a rack

  • Minimum of 2 database servers, maximum of 19 database servers

  • Minimum of 3 HC or EF storage servers, maximum of 18 storage servers

  • An extra InfiniBand leaf switch can be installed for combining racks.

  • An extra network card can be installed if you require additional connectivity for client networks, or for a separate network.

  • A memory expansion kit can be installed to increase memory capacity for the database or storage servers.

  • A disk expansion kit can be used to upgrade disk storage of the database server, which increases the usable disk capacity of the database server, for use by Oracle Homes or other local disk requirements.

  • 2 database servers. Each server has 1x 24-core processor with all 24-cores enabled

  • 3 Exadata X7-2 storage servers. Each server has 2 x 10-core processors, each with 5 cores enabled

    • High Capacity (HC) storage servers have 2 PCI flash cards, each with 6.4 TB (raw) Smart Flash Cache and 6 x 10 TB 7,200 RPM high capacity disks.

    • EF storage servers have 4 PCI flash drives, each with 3.2 TB (raw) storage.

  • 2 Sun Datacenter InfiniBand Switch 36 switches

  • 2 redundant PDUs (1- phase or 3- phase, high voltage or low voltage)

  • 1 48-port Cisco Nexus 93108-1G or 9348 Ethernet switch

  • Raw flash capacity: 76.8 TB for EF, or 38.4 TB for HC

  • Raw hard disk capacity: 180 TB for HC disks

Oracle Exadata Database Machine X6-2

  • 2 Exadata X6-2 database servers

  • 3 Exadata X6-2 storage servers

  • 2 Sun Datacenter InfiniBand Switch 36 switches

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • Raw flash capacity: 76.8 TB for EF, or 38.4 TB for HC

  • Raw hard disk capacity: 288 TB for HC
  • Maximum of 22 servers (database and storage) in a rack

  • Minimum of 2 database servers, maximum of 19 database servers

  • Minimum of 3 HC or EF storage servers, maximum of 18 storage servers

  • An extra InfiniBand leaf switch can be installed for combining racks.

  • An extra network card can be installed if you require additional connectivity for client networks, or for a separate network.

  • A memory expansion kit can be installed to increase memory capacity for the database or storage servers.

  • A disk expansion kit can be used to upgrade disk storage of the database server, which increases the usable disk capacity of the database server, for use by Oracle Homes or other local disk requirements.

  • 2 database servers. Each server has 2x 22-core processors, each with 11-cores enabled

  • 3 Exadata X6-2 storage servers. Each server has 2 x 10-core processors, each with 5 cores enabled.

    • High Capacity (HC) storage servers have 2 PCI flash cards, each with 3.2 TB (raw) Smart Flash Cache and 6 x 8 TB 7,200 RPM high capacity disks.

    • EF storage servers have 4 enabled PCI flash drives, each with 3.2 TB (raw) storage.

  • 2 Sun Datacenter InfiniBand Switch 36 switches

  • 2 redundant PDUs (1- phase or 3- phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • Raw flash capacity: 38.4 TB for EF, or 19.2 TB for HC

  • Raw hard disk capacity: 144 TB for HC disks

The following table describes the fixed configurations (Full Rack, Half Rack, Quarter Rack, and Eighth Rack) for Oracle Exadata Database Machine.

Table 10-2 Components of Oracle Exadata Database Machine in Fixed Configurations

EditionOracle Exadata Database Machine Full RackOracle Exadata Database Machine Half RackOracle Exadata Database Machine Quarter RackOracle Exadata Database Machine Eighth Rack

Oracle Exadata Database Machine X9M-2

Not applicable

Not applicable

Not applicable

  • 2 Exadata X9M-2 database servers. Each server has 1 x 32-core processor with all 32 cores enabled

  • 3 Exadata X9M-2 storage servers. Each server has 2 x 16-core processors and contains the following storage:

    • 6 x 18 TB 7,200 RPM high capacity disks.

    • 2 PCI flash cards, each with 6.4 TB of raw flash storage.

    • 768 GB of persistent memory

  • 2 RoCE Network Fabric Switches

  • 2 redundant PDUs (1- phase or 3- phase, high voltage or low voltage)

  • 1 Management Network Switch

  • Raw flash capacity: 38.4 TB

  • Raw hard disk capacity: 324 TB

  • Persistent memory capacity: 2.3 TB

Oracle Exadata Database Machine X9M-8

  • 2 Exadata X9M-8 database servers. An additional database server can be added.

  • 14 Exadata X9M-2 storage servers, either High Capacity or Extreme Flash

  • 2 RoCE Network Fabric Switches

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 Management Network Switch

  • Raw flash capacity: 716.8 TB for EF, or 358.4 TB for HC

  • Raw hard disk capacity: 3024 TB for HC

  • Persistent memory capacity: 21 TB

  • 2 Exadata X9M-8 database servers. An additional database server can be added.

  • 3 Exadata X9M-2 storage servers, either High Capacity or Extreme Flash

  • 2 RoCE Network Fabric Switches. An extra switch can be installed for combining racks.

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 Management Network Switch

  • Raw flash capacity: 153.6 TB for EF, or 76.8 TB for HC

  • Raw hard disk capacity: 648 TB for HC

  • Persistent memory capacity: 4.5 TB

Not applicable

Not applicable

Oracle Exadata Database Machine X8M-2

Not applicable

Not applicable

Not applicable

  • 2 Exadata X8M-2 database servers. Each server has 1x 24-core processor with all 24-cores enabled.

  • 3 Exadata X8M-2 storage servers, either High Capacity or Extreme Flash. Each server has 2 x 16-core processors, each with 8 cores enabled.

    • High Capacity (HC) storage servers have 2 PCI flash cards, each with 6.4 TB (raw) Smart Flash Cache and 6 x 14 TB 7,200 RPM high capacity disks.

    • EF storage servers have 4 PCI flash cards, each with 6.4 TB (raw) storage.

  • 2 RoCE Network Fabric Switches

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 Management Network Switch

  • Raw flash capacity: 76.8 TB for EF, or 38.4 TB for HC

  • Raw hard disk capacity: 180 TB for HC

Oracle Exadata Database Machine X8M-8

  • 2 Exadata X8M-8 database servers. An additional database server can be added.

  • 14 Exadata X8M-2 storage servers, either High Capacity or Extreme Flash

  • 2 RoCE Network Fabric Switches

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 Management Network Switch

  • Raw flash capacity: 716.8 TB for EF, or 358.4 TB for HC

  • Raw hard disk capacity: 2352 TB for HC

  • 2 Exadata X8M-8 database servers. An additional database server can be added.

  • 3 Exadata X8M-2 storage servers, either High Capacity or Extreme Flash

  • 2 RoCE Network Fabric Switches. An extra switch can be installed for combining racks.

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 Management Network Switch

  • Raw flash capacity: 153.3 TB for EF, or 76.8 TB for HC

  • Raw hard disk capacity: 504 TB for HC

Not applicable

Not applicable

Oracle Exadata Database Machine X8-2

Not applicable

Not applicable

Not applicable

  • 2 Exadata X8-2 database servers. Each server has 1x 24-core processor with all 24-cores enabled.

  • 3 Exadata X8-2 storage servers, either High Capacity or Extreme Flash. Each server has 2 x 16-core processors, each with 8 cores enabled.

    • High Capacity (HC) storage servers have 2 PCI flash cards, each with 6.4 TB (raw) Smart Flash Cache and 6 x 14 TB 7,200 RPM high capacity disks.

    • EF storage servers have 4 PCI flash cards, each with 6.4 TB (raw) storage.

  • 2 Sun Datacenter InfiniBand Switch 36 switches

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Nexus 9348 Ethernet switch.

  • Raw flash capacity: 76.8 TB for EF, or 38.4 TB for HC

  • Raw hard disk capacity: 180 TB for HC

Oracle Exadata Database Machine X8-8

  • 2 Exadata X8-8 database servers. An additional database server can be added.

  • 14 Exadata X8-2 storage servers, either High Capacity or Extreme Flash

  • 2 Sun Datacenter InfiniBand Switch 36 switches.

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Nexus 9348 Ethernet switch.

  • Raw flash capacity: 716.8 TB for EF, or 358.4 TB for HC

  • Raw hard disk capacity: 2352 TB for HC

  • 2 Exadata X8-8 database servers. An additional database server can be added.

  • 3 Exadata X8-2 storage servers, either High Capacity or Extreme Flash

  • 2 Sun Datacenter InfiniBand Switch 36 switches. An extra InfiniBand leaf switch can be installed for combining racks.

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Nexus 9348 Ethernet switch

  • Raw flash capacity: 716.8 TB for EF, or 358.4 TB for HC

  • Raw hard disk capacity: 2352 TB for HC

Not applicable

Not applicable

Oracle Exadata Database Machine X7-2

  • 8 database servers

  • 14 Exadata X7-2 storage servers

  • 2 Sun Datacenter InfiniBand Switch 36 switches

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Nexus 93108-1G or 9348 Ethernet switch

  • Raw flash capacity: 716.8 TB for EF, or 358.4 TB for HC

  • Raw hard disk capacity: 1680 TB for HC

  • 4 database servers

  • 7 Exadata X7-2 storage servers

  • 2 Sun Datacenter InfiniBand Switch 36 switches

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Nexus 93108-1G or 9348 Ethernet switch

  • Raw flash capacity: 358.4 TB for EF, or 179.2 TB for HC

  • Raw hard disk capacity: 840 TB for HC

  • 2 database servers

  • 3 Exadata X7-2 storage servers

  • 2 Sun Datacenter InfiniBand Switch 36 switches

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Nexus 93108-1G or 9348 Ethernet switch

  • Raw flash capacity: 153.6 TB for EF, or 76.8 TB for HC

  • Raw hard disk capacity: 360 TB for HC

  • 2 database servers. Each server has 1x 24-core processor with all 24-cores enabled.

  • 3 Exadata X7-2 storage servers, either High Capacity or Extreme Flash. Each server has 2 x 10-core processors, each with 5 cores enabled.

    • High Capacity (HC) storage servers have 2 PCI flash cards, each with 6.4 TB (raw) Smart Flash Cache and 6 x 10 TB 7,200 RPM high capacity disks.

    • EF storage servers have 8 PCI flash cards, 4 enabled, each with 3.2 TB (raw) storage.

  • 2 Sun Datacenter InfiniBand Switch 36 switches

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1x 48-port Cisco Nexus 93108-1G or 9348 Ethernet switch

  • Raw flash capacity: 76.8 TB for EF, or 38.4 TB for HC

  • Raw hard disk capacity: 180 TB for HC

Oracle Exadata Database Machine X7-8

  • 2 database servers

  • 14 Exadata X7-2 storage servers

  • 2 Sun Datacenter InfiniBand Switch 36 switches

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Nexus 93108-1G or 9348 Ethernet switch

  • Raw flash capacity: 716.8 TB for EF, or 358.4 TB for HC

  • Raw hard disk capacity: 1680 TB for HC

Not applicable

Not applicable

Not applicable

Oracle Exadata Database Machine X6-2

  • 8 database servers

  • 14 Exadata X6-2 storage servers

  • 2 Sun Datacenter InfiniBand Switch 36 switches

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • Raw flash capacity: 358.4 TB for EF, or179.2 TB for HC

  • Raw hard disk capacity: 1344 TB for HC

  • 4 database servers

  • 7 Exadata X6-2 storage servers

  • 2 Sun Datacenter InfiniBand Switch 36 switches

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • Raw flash capacity: 179.2 TB for EF, or 89.6 TB for HC

  • Raw hard disk capacity: 672 TB for HC

  • 2 database servers

  • 3 Exadata X6-2 storage servers

  • 2 Sun Datacenter InfiniBand Switch 36 switches

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • Raw flash capacity: 76.8 TB for EF, or 38.4 TB for HC

  • Raw hard disk capacity: 288 TB for HC

  • 2 database servers. Each server has 2 x22-core processors, each with 11 cores enabled.

  • 3 Exadata X6-2 storage servers. Each server has2x 10-core processors, with 5 cores enabled.

    • High Capacity (HC) storage servers have 2 PCI flash cards, each with 3.2 TB (raw) Smart Flash Cache and 6 x 8 TB 7,200 RPM high capacity disks.

    • EF storage servers have 8 PCI flash cards, 4 enabled, each with 3.2 TB (raw) storage.

  • 2 Sun Datacenter InfiniBand Switch 36 switches

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • Raw flash capacity: 38.4 TB for EF, or 19.2 TB for HC

  • Raw hard disk capacity: 144 TB for HC

Oracle Exadata Database Machine X5-2

  • 8 database servers

  • 14 Exadata X5-2 storage servers

  • 2 Sun Datacenter InfiniBand Switch 36

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • Raw flash capacity: 179.2 TB for EF, or 89.6 TB for HC

  • Raw hard disk capacity: 1344 TB for HC

  • 4 database servers

  • 7 Exadata X5-2 storage servers

  • 2 Sun Datacenter InfiniBand Switch 36

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • Raw flash capacity: 89.6 TB for EF, or 44.8 TB for HC

  • Raw hard disk capacity: 672 TB for HC

  • 2 database servers

  • 3 Exadata X5-2 storage servers

  • 2 Sun Datacenter InfiniBand Switch 36

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • Raw flash capacity: 38.4 TB for EF, or 19.2 TB for HC

  • Raw hard disk capacity: 288 TB for HC

  • 2 database servers. Each server has 2 18-core processors, each with 9 cores enabled

  • 3 Exadata X5-2 storage servers. Each server has:

    – 2 eight-core processors, each with 4 cores enabled

    – 4 PCI flash cards, 2 enabled, each with 1.6 TB (raw) Smart Flash Cache and 12 x 8 TB 7,200 RPM High Capacity (HC) disks, OR

    – 8 PCI flash drives, 4 enabled, each with 1.6 TB (raw) storage

  • 2 Sun Datacenter InfiniBand Switch 36

  • 2 redundant PDUs (1 phase or 3 phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • Raw flash capacity: 19.2 TB for EF, or 9.6 TB for HC

  • Raw hard disk capacity: 144 TB for HC disks

Oracle Exadata Database Machine X5-8

Oracle Exadata Database Machine X6-8

  • 2 database servers

  • 14 Exadata X5-2 storage servers (X6-2 for X6-8)

  • 2 Sun Datacenter InfiniBand Switch 36

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • Raw flash capacity: 179.2 TB for EF, or 89.6 TB for HC

  • Raw hard disk capacity: 1344 TB for HC

  • 2 database servers

  • 3 Exadata X5-2 storage servers

  • 2 Sun Datacenter InfiniBand Switch 36

  • 2 redundant PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • Raw flash capacity: 38.4 TB for EF, or 19.2 TB for HC

  • Raw hard disk capacity: 288 TB for HC

Not applicable

Not applicable

Oracle Exadata Database Machine X4-2

  • 8 database servers

  • 14 Exadata X4-2L storage servers

  • 2 Sun Datacenter InfiniBand Switch 36

  • 2 redundant 15 kVA PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • 44.8 TB of raw flash capacity

  • 200 TB raw storage capacity for high performance disks, or 672 TB raw capacity for HC

  • 4 database servers

  • 7 Exadata X4-2L storage servers

  • 2 Sun Datacenter InfiniBand Switch 36

  • 2 redundant 15 kVA PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • 22.4 TB of raw flash capacity

  • 100 TB raw storage capacity for high performance disks, or 386 TB raw capacity for HC

  • 2 database servers

  • 3 Exadata X4-2L storage servers

  • 2 Sun Datacenter InfiniBand Switch 36

  • 2 redundant 15 kVA PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • 9.6 TB of raw flash capacity

  • 43.2 TB raw storage capacity for high performance disks, or 144 TB raw capacity for HC

  • 2 database servers

  • 3 Exadata X4-2L storage servers. Each server has:

    - 2 six-core processors

    - 12 x 1.2 TB 10,000 RPM High Performance disks, OR

    - 12 x 4 TB 7,200 RPM High Capacity disks

  • 2 Sun Datacenter InfiniBand Switch 36

  • 2 redundant 15 kVA PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • 4.8 TB of raw flash capacity

  • 21.6 TB raw storage capacity for high performance disks, or 72 TB raw capacity for HC

Oracle Exadata Database Machine X4-8 Full Rack

  • 2 database servers

  • 14 Exadata X4-2L storage servers

  • 2 Sun Datacenter InfiniBand Switch 36

  • 2 redundant 15 kVA PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • 44.8 TB of raw flash capacity

  • 200 TB raw storage capacity for high performance disks, or 672 TB raw capacity for HC

Not applicable

Not applicable

Not applicable

Oracle Exadata Database Machine X3-2

  • 8 database servers

  • 14 Exadata X3-2 storage servers

  • 3 Sun Datacenter InfiniBand Switch 36

  • 2 redundant 15 kVA PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • 22.4 TB of raw flash capacity

  • 100 TB raw storage capacity for high performance disks, or 504 TB raw capacity for HC

  • 4 database servers

  • 7 Exadata X3-2 storage servers

  • 3 Sun Datacenter InfiniBand Switch 36 (Oracle Exadata Database Machine Half Rack based on Sun Fire X4170 Oracle Database Servers includes two Sun Datacenter InfiniBand Switch 36 switches.)

  • 2 redundant 15 kVA PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • 11.2 TB of raw flash capacity

  • 50 TB raw storage capacity for high performance disks, or 252 TB raw capacity for HC

  • 2 database servers

  • 3 Exadata X3-2 storage servers

  • 2 Sun Datacenter InfiniBand Switch 36

  • 2 redundant 15 kVA PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • 4.8 TB of raw flash capacity

  • 21.6 TB raw storage capacity for high performance disks, or 108 TB raw capacity for HC

  • 2 database servers

  • 3 Exadata X3-2 storage servers

    - 2 six-core processors, each with 3 cores enabled

    - 12 PCI flash cards (6 cards enabled) with 2.4 TB Exadata Smart Flash Cache

    - 18 x 600 GB 15,000 RPM High Performance disks, OR 18 x 3 TB 7,200 RPM High Capacity disks (6 disks per storage server enabled)

  • 2 Sun Datacenter InfiniBand Switch 36

  • 2 redundant 15 kVA PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • 2.4 TB of raw flash capacity

  • 10.8 TB raw storage capacity for high performance disks, or 54 TB raw capacity for HC

Oracle Exadata Database Machine X3-8 Full Rack with Exadata X4-2L storage servers

  • 2 database servers

  • 14 Exadata X4-2L storage servers

  • 2 Sun Datacenter InfiniBand Switch 36

  • 2 redundant 24 kVA PDUs (three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • 44.8 TB of raw flash capacity

  • 200 TB raw storage capacity for high performance disks, or 672 TB raw capacity for HC

Not applicable

Not applicable

Not applicable

Oracle Exadata Database Machine X3-8 Full Rack with Exadata X3-2 storage servers

  • 2 database servers

  • 14 Exadata X3-2 storage servers

  • 3 Sun Datacenter InfiniBand Switch 36

  • 2 redundant 24 kVA PDUs (three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948E-F, model number WS-C4948E-F-S Ethernet switch

  • 22.4 TB of raw flash capacity

  • 100 TB raw storage capacity for high performance disks, or 504 TB raw capacity for HC

Not applicable

Not applicable

Not applicable

Oracle Exadata Database Machine X2-2

  • 8 database servers

  • 14 Exadata X2-2 storage servers

  • 3 Sun Datacenter InfiniBand Switch 36

  • Keyboard, video, and mouse (KVM) hardware

  • 2 redundant 15 kVA PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948, model number WS-C4948-S Ethernet switch

  • 5.3 TB of raw flash capacity

  • 4 database servers

  • 7 Exadata X2-2 storage servers

  • 3 Sun Datacenter InfiniBand Switch 36 (Oracle Exadata Database Machine Half Rack based on Sun Fire X4170 Oracle Database Servers includes two Sun Datacenter InfiniBand Switch 36 switches.)

  • Keyboard, video, and mouse (KVM) hardware

  • 2 redundant 15 kVA PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948, model number WS-C4948-S Ethernet switch

  • 2.6 TB of raw flash capacity

  • 2 database servers

  • 3 Exadata X2-2 storage servers

  • 2 Sun Datacenter InfiniBand Switch 36

  • Keyboard, video, and mouse (KVM) hardware

  • 2 redundant 15 kVA PDUs (single phase or three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948, model number WS-C4948-S Ethernet switch

  • 1.1 TB of raw flash capacity

Not applicable

Oracle Exadata Database Machine X2-8 Full Rack

  • 2 database servers

  • 14 Exadata X2-2 storage servers

  • 3 Sun Datacenter InfiniBand Switch 36

  • 2 redundant 24 kVA PDUs (three phase, high voltage or low voltage)

  • 1 48-port Cisco Catalyst 4948, model number WS-C4948-S Ethernet switch

  • 5.3 TB of raw flash capacity

Not applicable

Not applicable

Not applicable

Parent topic: Hardware Components of Oracle Exadata

10.2 Oracle Exadata Database Server Hardware Components

Each Oracle Exadata Database Machine contains multiple database servers.

The following sections describe the database server components for each type of Oracle Exadata Database Machine:

  • Oracle Exadata X10M Database Server Hardware Components
  • Database Server Components of Oracle Exadata X9M-2
  • Database Server Components of Oracle Exadata X9M-8
  • Database Server Components of Oracle Exadata X8M-2
  • Database Server Components of Oracle Exadata X8M-8
  • Database Server Components of Oracle Exadata Database Machine X8-2
  • Database Server Components of Oracle Exadata Database Machine X8-8
  • Database Server Components of Oracle Exadata Database Machine X7-2
  • Database Server Components of Oracle Exadata Database Machine X7-8
  • Database Server Components of Oracle Exadata Database Machine X6-2
  • Database Server Components of Oracle Exadata Database Machine X5-2
  • Database Server Components of Oracle Exadata Database Machine X5-8 and X6-8
  • Database Server Components of Oracle Exadata Database Machine X4-2
  • Database Server Components of Oracle Exadata Database Machine X4-8 Full Rack
  • Database Server Components of Oracle Exadata Database Machine X3-2
  • Database Server Components of Oracle Exadata Database Machine X3-8 Full Rack
  • Database Server Components of Oracle Exadata Database Machine X2-2
  • Database Server Components of Oracle Exadata Database Machine X2-8 Full Rack

Parent topic: Hardware Components of Oracle Exadata

10.2.1 Oracle Exadata X10M Database Server Hardware Components

Each Oracle Exadata X10M database server includes the following components:

  • CPU: 2 x 96-core AMD EPYC™ 9J14 processors, 2.6 GHz (up to 3.7 GHz)
  • RAM: 512 GB RAM (16 x 32 GB DIMMs), 1.5 TB (24 x 64 GB DIMMs), 2.25 TB (24 x 96 GB DIMMs), or 3 TB (24 x 128 GB DIMMs)
  • System storage: 2 x 3.84 TB PCIe 4.0 NVMe storage devices, expandable to 4 devices
  • RDMA Network Fabric: 1 x dual-port CX7 RDMA Network Fabric card; PCIe 4.0, 2 x 100 Gb/s ports active-active (200 Gb/s combined throughput)
  • Administration network: 1 x 1 GbE Base-T Ethernet port
  • Integrated Lights Out Manager (ILOM) port for remote management: 1 x 1 GbE Base-T Ethernet port
  • Client and additional network connectivity:
    • Two factory-installed CX6-LX network cards. Each card contains 2 x SFP+/SFP28 ports (10/25 GbE)
    • Up to 3 optional network cards. Each card can be any of the following:
      • CX6-LX with 2 x SFP+/SFP28 ports (10/25 GbE)
      • CX6-DX with 2 x QSFP28 ports (100GbE). Each QSFP28 port can support one 10 GbE or 25 GbE link with appropriate breakout cables.
      • Fortpond RJ45 Ethernet with 4 x 10GBASE-T ports (10 GbE)

Parent topic: Oracle Exadata Database Server Hardware Components

10.2.2 Database Server Components of Oracle Exadata X9M-2

Each Oracle Exadata X9M-2 database server includes the following components:

  • CPU - 32-core Intel Xeon 8358 processors (2.6 GHz):
    • Flexible configuration: 2 CPUs
    • Eighth Rack: 1 CPU
  • RAM:
    • Flexible configuration: 512 GB RAM (16 x 32 GB DIMMs), expandable to 1 TB (16 x 64 GB DIMMs), 1.5 TB (16 x 32 GB and 16 x 64 GB DIMMs), or 2 TB (32 x 64 GB DIMMs) with memory expansion kit
    • Eighth Rack: 384 GB RAM (12 x 32 GB DIMMs), expandable to 1 TB (16 x 64 GB DIMMs) with memory expansion kit
  • System storage: 2 x 3.84 TB PCIe 4.0 NVMe storage drives, expandable to 4 drives
  • RDMA Network Fabric: 1 x dual-port CX5 RDMA Network Fabric card; PCIe 4.0, 2 x 100 Gb/s ports active-active (200 Gb/s combined throughput)
  • Administration network: 1 x 1 GbE Base-T Ethernet port
  • Integrated Lights Out Manager (ILOM) port for remote management: 1 x 1 GbE Base-T Ethernet port
  • Client and additional network connectivity:
    • Flexible configuration options:
      • Two factory-installed network cards. Each card contains 2 x SFP+/SFP28 ports (10/25 GbE) or 4 x 10GBASE-T ports (10 GbE)
      • One optional field-installed network card containing 2 x SFP+/SFP28 ports (10/25 GbE) or 4 x 10GBASE-T ports (10 GbE) or 2 x QSFP28 ports (100GbE). Each QSFP28 port can support one 10 GbE or 25 GbE link with appropriate breakout cables.
    • Eighth Rack: Two factory-installed network cards only. Each card contains 2 x SFP+/SFP28 ports (10/25 GbE) or 4 x 10GBASE-T ports (10 GbE)

Parent topic: Oracle Exadata Database Server Hardware Components

10.2.3 Database Server Components of Oracle Exadata X9M-8

Each Oracle Exadata X9M-8 database server includes the following components:

  • CPU: 8 x 24-core Intel Xeon Platinum 8268 Processors (2.9GHz)
  • RAM: 3 TB (48 x 64 GB DIMMs), expandable to a maximum of 6 TB
  • System storage: 2 x 6.4 TB flash accelerator PCIe cards (Hot-Pluggable)
  • RDMA Network Fabric: 4 x dual-port QSFP28 100 Gb/s PCIe 3.0 RDMA Network Fabric cards - all ports active
  • Network connectivity:
    • 8 x 10GBASE-T ports (1/10 GbE) - 1 port used for the administration network
    • 8 x SFP+/SFP28 ports (10/25 GbE)
  • Integrated Lights Out Manager (ILOM) port for remote management: 1 x 1 GbE Base-T Ethernet port
  • Redundant hot-swappable power supplies and fans

Parent topic: Oracle Exadata Database Server Hardware Components

10.2.4 Database Server Components of Oracle Exadata X8M-2

Oracle Exadata X8M-2 database servers include the following components:

  • 2 x 24-core Intel Xeon Platinum 8260 Processors (2.4 GHz)
  • 384 GB RAM (12 x 32 GB DIMMs), expandable to 1.5 TB (24 x 64 GB DIMMs) with memory expansion kit
  • 4 x 1.2 TB boot drive/hard disks, hot swappable, expandable to 8 drives
  • Disk controller HBA with 2 GB cache (no batteries)
  • RDMA Network Fabric: 1 x dual-port QSFP28 100 Gb/s PCIe 3.0 RDMA Network Fabric card - both ports active
  • Client network: 2 x SFP+/SFP28 ports (10/25 GbE) or 2 x 10GBASE-T ports (10 GbE)
  • Backup/optional networks: 2 x SFP+/SFP28 ports (10/25 GbE) or 4 x 10GBASE-T ports (10 GbE)
  • Administration network: 1 x 1 GbE Base-T Ethernet port
  • Integrated Lights Out Manager (ILOM) port for remote management: 1 x 1 GbE Base-T Ethernet port

Parent topic: Oracle Exadata Database Server Hardware Components

10.2.5 Database Server Components of Oracle Exadata X8M-8

Oracle Exadata X8M-8 database servers include the following components:

  • 8 x 24-core Intel(R) Xeon(R) Platinum 8268 Processors (2.9GHz)
  • 3 TB (48 x 64 GB DIMMs) RAM
  • 2 x 6.4 TB flash accelerator PCIe cards (Hot-Pluggable)
  • RDMA Network Fabric: 4 x dual-port QSFP28 100 Gb/s PCIe 3.0 RDMA Network Fabric cards - all ports active
  • 8 x 10GBASE-T ports (10 GbE) - 1 port used for the administration network
  • 8 x SFP+/SFP28 ports (10/25 GbE)
  • Integrated Lights Out Manager (ILOM) port for remote management: 1 x 1 GbE Base-T Ethernet port
  • Redundant hot swappable power supplies and fans

Parent topic: Oracle Exadata Database Server Hardware Components

10.2.6 Database Server Components of Oracle Exadata Database Machine X8-2

Oracle Exadata Database Machine X8-2 database servers include the following components:

  • 2 x 24-core Intel Xeon Platinum 8260 Processors (2.4 GHz)
  • 384 GB RAM (12 x 32 GB DIMMs), expandable to 768 GB (12 x 64 GB DIMMs) or 1.5 TB (24 x 64 GB DIMMs) with memory expansion kit
  • 4 x 1.2 TB boot drive/hard disks, hot swappable, expandable to 8 drives
  • Disk controller HBA with 2 GB cache (no batteries)
  • RDMA Network Fabric: 2 x InfiniBand 4X QDR (40 Gb/s) ports (PCIe 3.0) - both ports active
  • Client network: 2 x SFP+/SFP28 ports (10/25 GbE) or 2 x 10GBASE-T ports (10 GbE)
  • Backup/optional networks: 2 x SFP+/SFP28 ports (10/25 GbE) or 4 x 10GBASE-T ports (10 GbE)
  • Administration network: 1 x 1 GbE Base-T Ethernet port
  • Integrated Lights Out Manager (ILOM) port for remote management: 1 x 1 GbE Base-T Ethernet port

Parent topic: Oracle Exadata Database Server Hardware Components

10.2.7 Database Server Components of Oracle Exadata Database Machine X8-8

Oracle Exadata Database Machine X8-8 database servers include the following components:

  • 8 x 24-core Intel(R) Xeon(R) Platinum 8268 Processors (2.9GHz)
  • 3 TB (48 x 64 GB DIMMs) RAM, expandable to 6 TB (96 x 64 GB DIMMs) with memory expansion kit
  • 2 x 6.4 TB flash accelerator PCIe cards (Hot-Pluggable)
  • RDMA Network Fabric: 8 x InfiniBand 4X QDR (40 Gb/s) ports (PCIe 3.0) - all ports active
  • 8 x 10GBASE-T ports (10 GbE) - 1 port used for the administration network
  • 8 x SFP+/SFP28 ports (10/25 GbE)
  • Integrated Lights Out Manager (ILOM) port for remote management: 1 x 1 GbE Base-T Ethernet port
  • Redundant hot swappable power supplies and fans

Parent topic: Oracle Exadata Database Server Hardware Components

10.2.8 Database Server Components of Oracle Exadata Database Machine X7-2

Oracle Exadata Database Machine X7-2 database servers include the following components:

  • 2 x 24-core Intel Xeon Platinum 8160 Processors (2.10GHz)
  • 384 GB RAM, expandable to 768 GB (12 x 64 GB) or 1.5 TB (24 x 64GB) with memory expansion kit
  • 4 x 600 GB 10K RPM SAS disks, hot swappable, expandable to 8 drives
  • Disk controller HBA with 2 GB cache (no batteries)
  • 2 x InfiniBand 4X QDR (40 Gbps) ports (PCIe 3.0), both ports active
  • 2 x 10 GbE Base-T Ethernet ports or 2 x 10GbE/25GbE Ethernet SFP28 Ports
  • 2 x 10GbE/25GbE Ethernet SFP28 Ports
  • 1 x 10/100/1000 BASE-T Ethernet port for Integrated Lights Out Manager (ILOM) for remote management

Parent topic: Oracle Exadata Database Server Hardware Components

10.2.9 Database Server Components of Oracle Exadata Database Machine X7-8

Oracle Exadata Database Machine X7-8 database servers include the following components:

  • 8 x 24-core Intel(R) Xeon(R) Platinum 8168 Processors (2.70GHz)
  • 3TB (48 x 64 GB) RAM, expandable to 6 TB (96 x 64 GB) with memory expansion kit
  • 8 x InfiniBand 4X QDR (40 Gbps) ports (PCIe 3.0) - all ports active
  • 8 x 10 GbE Base-T Ethernet ports (8 embedded ports based on the Intel 722 1/10GbE Controller)
  • 8 x 10GbE/25GbE Ethernet SFP28 Ports (4 Dual-port 10/25 GbE PCIe 3.0 network card based on the Broadcom BCM57414 10Gb/25Gb Ethernet Controller technology)
  • 1 Ethernet port for Integrated Lights Out Manager (ILOM) for remote management
  • Redundant hot swappable power supplies and fans

Parent topic: Oracle Exadata Database Server Hardware Components

10.2.10 Database Server Components of Oracle Exadata Database Machine X6-2

Oracle Exadata Database Machine X6-2 database servers include the following components:

  • 2 x 22-core Intel Xeon E5-2699 v4 processors (2.2 GHz)
  • 256 GB (8 x 32 GB) RAM expandable to 512 GB (16 x 32 GB) or 768 GB (24 x 32 GB) with memory expansion kit
  • 4 x 600 GB 10K RPM SAS disks, hot swappable, expandable to 8x
  • Disk controller HBA with 1 GB cache (no more batteries)
  • 2 x InfiniBand 4X QDR (40 Gbps) ports (PCIe 3.0), both ports active
  • 4 x 1 GbE/10 GbE Base-T Ethernet ports
  • 2 x 10 GbE Ethernet SFP+ ports (1 dual-port 10 GbE PCIe 2.0 network card based on the Intel 82599 10 GbE controller technology)
  • 1 Ethernet port for Integrated Lights Out Manager (ILOM) for remote management

Parent topic: Oracle Exadata Database Server Hardware Components

10.2.11 Database Server Components of Oracle Exadata Database Machine X5-2

Oracle Exadata Database Machine X5-2 database servers include the following components:

  • 2 Eighteen-Core Intel Xeon E5-2699 v3 processors (2.3 GHz)
  • 256 GB (8 x 32 GB) RAM expandable to 768 GB with memory expansion kit
  • 4 x 600 GB 10K RPM SAS disks
  • Disk controller HBA with 1 GB supercap-backed write cache
  • 2 InfiniBand 4X QDR (40 Gb/s) ports (1 dual-port PCIe 3.0 Host Channel Adapter (HCA))
  • 4 x 1 GbE/10GbE Base-T Ethernet ports
  • 2 x 10 GbE Ethernet SFP+ ports (1 dual-port 10GbE PCIe 2.0 network card based on the Intel 82599 10 GbE controller technology)
  • 1 Ethernet port for Integrated Lights Out Manager (ILOM) for remote management

Parent topic: Oracle Exadata Database Server Hardware Components

10.2.12 Database Server Components of Oracle Exadata Database Machine X5-8 and X6-8

Oracle Exadata Database Machine X5-8 and X6-8 database servers include the following components:

  • 8 Eighteen-Core Intel Xeon E7-8895 v3 processors (2.6 GHz)
  • 2 TB (64 x 32 GB) RAM, expandable to 6 TB (192 x 32 GB) with memory expansion kit
  • 8 x 600 GB 10K RPM SAS disks (hot swappable)
  • Disk controller HBA with 1 GB cache
  • 8 x InfiniBand 4X QDR (40 Gbps) ports (PCIe 3.0) - all ports active
  • 10 x 1 GbE Base-T Ethernet ports (2 Quad-port PCIe 2.0 network card, and 2 embedded ports based on the Intel I350 1 GbE Controller technology)
  • 8 x 10 GbE Ethernet SFP+ ports (4 Dual-port 10 GbE PCIe 2.0 network card based on the Intel 82599 10 GbE Controller technology)
  • 1 Ethernet port for Integrated Lights Out Manager (ILOM) for remote management
  • Redundant hot swappable power supplies and fans

Parent topic: Oracle Exadata Database Server Hardware Components

10.2.13 Database Server Components of Oracle Exadata Database Machine X4-2

Oracle Exadata Database Machine X4-2 database servers include the following components:

  • 2 Twelve-Core Intel Xeon E5-2697 v2 processors (2.7 GHz)
  • 256 GB (16 x 16 GB) RAM expandable to 512 GB with memory expansion kit
  • 4 x 600 GB 10K RPM SAS disks
  • Disk controller HBA with 512 MB battery-backed write cache, and swappable battery backup unit (BBU)
  • 2 InfiniBand 4X QDR (40 Gb/s) ports (1 dual-port PCIe 3.0 Host Channel Adapter (HCA))
  • 4 x 1 GbE/10GbE Base-T Ethernet ports
  • 2 x 10 GbE Ethernet SFP+ ports (1 dual-port 10GbE PCIe 2.0 network card based on the Intel 82599 10 GbE controller technology)
  • 1 Ethernet port for Integrated Lights Out Manager (ILOM) for remote management

Parent topic: Oracle Exadata Database Server Hardware Components

10.2.14 Database Server Components of Oracle Exadata Database Machine X4-8 Full Rack

Oracle Exadata Database Machine X4-8 Full Rack database servers include the following components:

  • 8 Fifteen-Core Intel Xeon E5-8895 v2 processors (2.8 GHz)
  • 2 TB (64 x 32 GB) RAM expandable to 4 TB or 6 TB with memory expansion kit
  • 7 x 600 GB 10K RPM SAS disks
  • Disk controller HBA with 512 MB battery-backed write cache, and swappable battery backup unit (BBU)
  • 8 InfiniBand 4X QDR (40 Gb/s) ports
  • 10 x 1 GbE Base-T Ethernet ports
  • 8 x 10 GbE Ethernet SFP+ ports (4 dual-port 10GbE PCIe 2.0 network card based on the Intel 82599 10 GbE controller technology)
  • 1 Ethernet port for Integrated Lights Out Manager (ILOM) for remote management

Parent topic: Oracle Exadata Database Server Hardware Components

10.2.15 Database Server Components of Oracle Exadata Database Machine X3-2

Oracle Exadata Database Machine X3-2 database servers include the following components:

  • 2 Eight-Core Intel Xeon E5-2690 processors (2.9 GHz)
  • 256 GB (16 x 16 GB) RAM expandable to 512 GB with memory expansion kit
  • 4 x 300 GB 10K RPM SAS disks
  • Disk controller HBA with 512 MB battery-backed write cache
  • 2 InfiniBand 4X QDR (40 Gb/s) ports (1 dual-port PCIe 2.0 Host Channel Adapter (HCA))
  • 4 x 1 GbE/10GbE Base-T Ethernet ports
  • 2 x 10 GbE Ethernet SFP+ ports (1 dual-port 10GbE PCIe 2.0 network card based on the Intel 82599 10 GbE controller technology)
  • 1 Ethernet port for ILOM for remote management

Parent topic: Oracle Exadata Database Server Hardware Components

10.2.16 Database Server Components of Oracle Exadata Database Machine X3-8 Full Rack

Oracle Exadata Database Machine X3-8 Full Rack database servers include the following components:

  • 8 Ten-core Intel Xeon E7-8870 Processors (2.40 GHz)
  • 2 TB RAM (128 x 16 GB)
  • 8 x 300GB 10K RPM SAS Disks
  • Disk Controller HBA with 512MB Battery-backed cache
  • 8 x InfiniBand QDR (40 Gb/s) Ports
  • 2 Network Express Modules (NEM) providing the following:
    • 8 x 10 Gb Ethernet network ports using SFP+ connectors (based on Intel 82599 10 GbE controller)
    • 8 x 1 Gb Ethernet network ports
  • 1 Ethernet port for Sun Integrated Lights Out Manager (ILOM) for remote management

Parent topic: Oracle Exadata Database Server Hardware Components

10.2.17 Database Server Components of Oracle Exadata Database Machine X2-2

Components of Sun Fire X4170 Oracle Database Servers

  • 2 Quad-Core Intel Xeon E5540 processors (2.53 GHz)
  • 72 GB RAM expandable to 144 GB with memory expansion kit
  • 4 x 146 GB 10K RPM SAS disks
  • Disk controller HBA with 512 MB battery-backed write cache
  • Dual-port 4X QDR (40 Gb/s) InfiniBand Host Channel Adapter (HCA)
  • 4 embedded Gigabit Ethernet ports
  • 1 Ethernet port for Sun Integrated Lights Out Manager (ILOM) for remote management

Components of Sun Fire X4170 M2 Oracle Database Servers

  • 2 Six-Core Intel Xeon X5675 processors (3.06 GHz)
  • 96 GB RAM expandable to 288 GB with memory expansion kit
  • 4 x 300 GB 10 K RPM SAS disks
  • Disk controller HBA with 512 MB battery-backed write cache
  • Dual-port 4X QDR (40 Gb/s) InfiniBand Host Channel Adapter (HCA)
  • 4 embedded Gigabit Ethernet ports
  • 1 Ethernet port for Sun Integrated Lights Out Manager (ILOM) for remote management
  • 1 dual-port 10 GbE PCIe 2.0 network card with Intel 82599 10 GbE controller

Note:

  • Sun Fire X4170 M2 Oracle Database Servers ship from the factory with 96 GB of memory with 12 of the 18 DIMM slots populated with 8 GB DIMMs. The optional X2-2 Memory Expansion Kit can be used to populate the remaining 6 empty slots with 16 GB DIMMs to bring the total memory to 192 GB (12 x 8 GB and 6 x 16 GB), or replace the existing 8 GB DIMMs with 16 GB DIMMs and add memory to bring the total memory to 288 GB (18 x 16 GB).

    The memory expansion kit is primarily for consolidation workloads where many databases are run on each database server. In this scenario, the CPU usage is often low while the memory usage is very high.

    However, there is a downside to populating all the memory slots as the frequency of the memory DIMMs drop to 800 MHz from 1333 MHz. The performance effect of the slower memory appears as increased CPU utilization. The average measured increase in CPU utilization is typically between 5% and 10%. The increase varies greatly by workload. In test workloads, several workloads had almost zero increase, while one workload had as high as a 20% increase.

Parent topic: Oracle Exadata Database Server Hardware Components

10.2.18 Database Server Components of Oracle Exadata Database Machine X2-8 Full Rack

Components of Sun Fire X4800 Oracle Database Servers

  • 8 Eight-core Intel Xeon X7560 Processors (2.26 GHz)
  • 1 TB RAM
  • 8 x 300GB 10K RPM SAS Disks
  • Disk Controller HBA with 512MB Battery-backed cache
  • 4 dual-port 4X QDR InfiniBand PCIe 2.0 Express Modules (EM)
  • 2 Network Express Modules (NEM) providing the following:
    • 8 x 10 Gb Ethernet network ports using SFP+ connectors (based on Intel 82599 10 GbE controller)
    • 8 x 1 Gb Ethernet network ports
  • 1 Ethernet port for Sun Integrated Lights Out Manager (ILOM) for remote management

Components of Sun Server X2-8 Oracle Database Server

  • 8 Ten-core Intel Xeon E7-8870 Processors (2.40 GHz)
  • 2 TB RAM (128 x 16 GB)
  • 8 x 300GB 10K RPM SAS Disks
  • Disk Controller HBA with 512MB Battery-backed cache
  • 4 dual-port 4X QDR InfiniBand PCIe 2.0 Express Modules (EM)
  • 2 Network Express Modules (NEM) providing the following:
    • 8 x 10 Gb Ethernet network ports using SFP+ connectors (based on Intel 82599 10 GbE controller)
    • 8 x 1 Gb Ethernet network ports
  • 1 Ethernet port for Sun Integrated Lights Out Manager (ILOM) for remote management

Parent topic: Oracle Exadata Database Server Hardware Components

10.3 Oracle Exadata Storage Server Hardware Components

Each Oracle Exadata Database Machine contains multiple storage servers.

The following sections describe the hardware components for each type of Oracle Exadata Storage Server:

  • Exadata Storage Server X10M Extreme Flash Hardware Components
    Each Oracle Exadata Storage Server X10M Extreme Flash (EF) server includes the following components:
  • Exadata Storage Server X10M High Capacity Hardware Components
    Each Oracle Exadata Storage Server X10M High Capacity (HC) server includes the following components:
  • Exadata Storage Server X10M Extended Hardware Components
    Each Oracle Exadata Storage Server X10M Extended (XT) server includes the following components:
  • Extreme Flash Exadata Storage Server X9M-2 Hardware Components
    Each Oracle Exadata Storage Server X9M-2 Extreme Flash (EF) server includes the following components:
  • High Capacity Exadata Storage Server X9M-2 Hardware Components
    Each Oracle Exadata Storage Server X9M-2 High Capacity (HC) server includes the following components:
  • Extended Exadata Storage Server X9M-2 Hardware Components
    Each Oracle Exadata Storage Server X9M-2 Extended (XT) server includes the following components:
  • Extreme Flash Exadata Storage Server X8M-2 and X8-2 Hardware Components
    Oracle Exadata Storage Server X8-2 and X8M-2 Extreme Flash servers include the following components:
  • High Capacity Exadata Storage Server X8-2 and X8M-2 Hardware Components
    Oracle Exadata Storage Server X8-2 and X8M-2 High Capacity servers include the following components:
  • Extended Exadata Storage Server X8-2 and X8M-2 Hardware Components
    Exadata Extended (XT) Storage Server and X8M-2 Extended (XT) servers include the following components:
  • Extreme Flash Exadata Storage Server X7-2 Hardware Components
    Oracle Exadata Storage Server X7-2 Extreme Flash servers include the following components:
  • High Capacity Exadata Storage Server X7-2 Hardware Components
    Oracle Exadata Storage Server X7-2 High Capacity servers include the following components:
  • Extreme Flash Exadata Storage Server X6-2 Hardware Components
    Oracle Exadata Storage Server X6-2 Extreme Flash servers include the following components:
  • High Capacity Exadata Storage Server X6-2 Hardware Components
    Oracle Exadata Storage Server X6-2 High Capacity servers include the following components:
  • Extreme Flash Exadata Storage Server X5-2 Hardware Components
    Oracle Exadata Storage Server X5-2 Extreme Flash servers include the following components:
  • High Capacity Exadata Storage Server X5-2 Hardware Components
    Oracle Exadata Storage Server X5-2 High Capacity servers include the following components:
  • Exadata Storage Server X4-2L Hardware Components
    Oracle Exadata Storage Server X4-2L servers include the following components:
  • Exadata Storage Server X3-2L Hardware Components
    Oracle Exadata Storage Server X3-2L servers include the following components:
  • Exadata Storage Server with Sun Fire X4270 M2 Servers Hardware Components
    Oracle Exadata Storage Server with Sun Fire X4270 M2 Servers include the following components:
  • Exadata Storage Server with Sun Fire X4275 Servers Hardware Components
    Oracle Exadata Storage Server with Sun Fire X4275 Servers include the following components:

Parent topic: Hardware Components of Oracle Exadata

10.3.1 Exadata Storage Server X10M Extreme Flash Hardware Components

Each Oracle Exadata Storage Server X10M Extreme Flash (EF) server includes the following components:

  • CPU: 2 x 32-core AMD EPYC™ 9334 processors, 2.7 GHz (up to 3.9 GHz)
  • RAM: 1.5 TB (24 x 64 GB DIMMs) including XRMEM cache
  • Flash storage:
    • 4 x 30.72 TB capacity-optimized flash devices (for primary data storage)
    • 4 x 6.8 TB performance-optimized flash devices (primarily for high-performance low-latency caching using Exadata Smart Flash Cache and Exadata Smart Flash Log)
  • System storage: 2 x 480 GB NVMe devices
  • RDMA Network Fabric: 1 x dual-port CX7 RDMA Network Fabric card; PCIe 4.0, 2 x 100 Gb/s ports active-active (200 Gb/s combined throughput)
  • Administration network: 1 x 1 GbE Base-T Ethernet port
  • Integrated Lights Out Manager (ILOM) port for remote management: 1 x 1 GbE Base-T Ethernet port

The X10M EF storage server requires Oracle Exadata System Software release 23.1.0 or later.

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.2 Exadata Storage Server X10M High Capacity Hardware Components

Each Oracle Exadata Storage Server X10M High Capacity (HC) server includes the following components:

  • CPU: 2 x 32-core AMD EPYC™ 9334 processors, 2.7 GHz (up to 3.9 GHz)
  • RAM: 1.5 TB (24 x 64 GB DIMMs) including XRMEM cache
  • Disk storage: 12 x 22 TB hard disk drives (HDD)
  • Flash storage: 4 x 6.8 TB performance-optimized flash devices
  • System storage: 2 x 480 GB NVMe devices
  • RDMA Network Fabric: 1 x dual-port CX7 RDMA Network Fabric card; PCIe 4.0, 2 x 100 Gb/s ports active-active (200 Gb/s combined throughput)
  • Administration network: 1 x 1 GbE Base-T Ethernet port
  • Integrated Lights Out Manager (ILOM) port for remote management: 1 x 1 GbE Base-T Ethernet port

The X10M HC storage server requires Oracle Exadata System Software release 23.1.0 or later.

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.3 Exadata Storage Server X10M Extended Hardware Components

Each Oracle Exadata Storage Server X10M Extended (XT) server includes the following components:

  • CPU: 1 x 32-core AMD EPYC™ 9334 processor, 2.7 GHz (up to 3.9 GHz)
  • RAM: 128 GB (4 x 32 GB DIMMs)
  • Disk storage: 12 x 22 TB hard disk drives (HDD)
  • System storage: 2 x 480 GB NVMe devices
  • RDMA Network Fabric: 1 x dual-port CX7 RDMA Network Fabric card; PCIe 4.0, 2 x 100 Gb/s ports active-active (200 Gb/s combined throughput)
  • Administration network: 1 x 1 GbE Base-T Ethernet port
  • Integrated Lights Out Manager (ILOM) port for remote management: 1 x 1 GbE Base-T Ethernet port

The X10M XT storage server requires Oracle Exadata System Software release 23.1.0 or later.

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.4 Extreme Flash Exadata Storage Server X9M-2 Hardware Components

Each Oracle Exadata Storage Server X9M-2 Extreme Flash (EF) server includes the following components:

  • CPU: 2 x 16-core Intel Xeon 8352Y processors (2.2 GHz)
  • RAM: 256 GB (16 x 16 GB DDR4 3200 MT/s DIMMs)
  • Flash storage: 8 x 6.4 TB NVMe flash devices (PCIe 4.0)
  • Persistent memory: 12 x 128 GB modules (Intel Optane Persistent Memory 200 Series)
  • System storage: 2 x 240 GB M.2 devices
  • RDMA Network Fabric: 1 x dual-port CX5 RDMA Network Fabric card; PCIe 4.0, 2 x 100 Gb/s ports active-active (200 Gb/s combined throughput)
  • Administration network: 1 x 1 GbE Base-T Ethernet port
  • Integrated Lights Out Manager (ILOM) port for remote management: 1 x 1 GbE Base-T Ethernet port

The X9M-2 EF storage server requires Oracle Exadata System Software release 21.2.0 or later.

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.5 High Capacity Exadata Storage Server X9M-2 Hardware Components

Each Oracle Exadata Storage Server X9M-2 High Capacity (HC) server includes the following components:

  • CPU: 2 x 16-core Intel Xeon 8352Y processors (2.2 GHz), but only half of the CPU cores are enabled on Eighth Rack configurations
  • RAM: 256 GB (16 x 16 GB DDR4 3200 MT/s DIMMs)
  • Disk storage: 12 x 18 TB hard disk drives (HDD), but only 6 HDD on Eighth Rack configurations
  • Disk controller Host Bus Adapter (HBA) with 2 GB cache
  • Flash storage: 4 x 6.4 TB NVMe flash devices (PCIe 4.0), but only 2 flash devices on Eighth Rack configurations
  • Persistent memory: 12 x 128 GB modules (Intel Optane Persistent Memory 200 Series), but only 6 modules on Eighth Rack configurations
  • System storage: 2 x 240 GB M.2 devices
  • RDMA Network Fabric: 1 x dual-port CX5 RDMA Network Fabric card; PCIe 4.0, 2 x 100 Gb/s ports active-active (200 Gb/s combined throughput)
  • Administration network: 1 x 1 GbE Base-T Ethernet port
  • Integrated Lights Out Manager (ILOM) port for remote management: 1 x 1 GbE Base-T Ethernet port

The X9M-2 HC storage server requires Oracle Exadata System Software release 21.2.0 or later.

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.6 Extended Exadata Storage Server X9M-2 Hardware Components

Each Oracle Exadata Storage Server X9M-2 Extended (XT) server includes the following components:

  • CPU: 1 x 16-core Intel Xeon 8352Y processor (2.2 GHz)
  • RAM: 96 GB (6 x 16 GB DDR4 3200 MT/s DIMMs)
  • Disk storage: 12 x 18 TB hard disk drives (HDD)
  • Disk controller Host Bus Adapter (HBA) with 2 GB cache
  • System storage: 2 x 240 GB M.2 devices
  • RDMA Network Fabric: 1 x dual-port CX5 RDMA Network Fabric card; PCIe 4.0, 2 x 100 Gb/s ports active-active (200 Gb/s combined throughput)
  • Administration network: 1 x 1 GbE Base-T Ethernet port
  • Integrated Lights Out Manager (ILOM) port for remote management: 1 x 1 GbE Base-T Ethernet port

The X9M-2 XT storage server requires Oracle Exadata System Software release 21.2.0 or later.

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.7 Extreme Flash Exadata Storage Server X8M-2 and X8-2 Hardware Components

Oracle Exadata Storage Server X8-2 and X8M-2 Extreme Flash servers include the following components:

  • 2x 16-core Intel Xeon 5218 Processors (2.3GHz)
  • 192 GB RAM (12 x 16 GB DIMMs) – full 6 channels
  • X8M-2 only: 12 x 128 GB Intel Optane™ DC Persistent Memory modules
  • 8 x 6.4 TB flash accelerator PCIe cards
  • 2 x 240 GB M.2 devices for system partitions (partitioned as 150 GB devices)
  • X8M-2 only: 1 dual-port (PCIe 3.0), both ports active, 100Gb/s RDMA Network Fabric Card
  • X8-2 only: 2 x InfiniBand 4X QDR (40 Gb/s) InfiniBand ports (1 dual-port PCIe 3.0 Host Channel Adapter (HCA)), all ports active
  • 1 Ethernet port for ILOM for remote management

The X8-2 EF server requires Oracle Exadata System Software release 19.2.0 or later. The X8M-2 EF server requires Oracle Exadata System Software release 19.3.0 or later.

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.8 High Capacity Exadata Storage Server X8-2 and X8M-2 Hardware Components

Oracle Exadata Storage Server X8-2 and X8M-2 High Capacity servers include the following components:

  • 2x 16-core Intel Xeon 5218 Processors (2.3GHz)
  • 192 GB RAM (12 x 16 GB DIMMs) – full 6 channels
  • X8M-2 only: 12 x 128 GB Intel Optane™ DC Persistent Memory modules
  • 12 x 14 TB High Capacity SAS disks, but only 6 drives on Eighth Rack configurations
  • 2 x 240 GB M.2 devices for system partitions (partitioned to appear as 150 GB devices)
  • 4 x 6.4 TB flash accelerator PCIe cards
  • Disk controller HBA with 2 GB cache
  • X8M-2 only: 1 dual-port (PCIe 3.0), both ports active, 100Gb/s RDMA Network Fabric Card
  • X8-2 only: 2 x InfiniBand 4X QDR (40 Gb/s) InfiniBand ports (1 dual-port PCIe 3.0 Host Channel Adapter (HCA)), all ports active
  • 1 Ethernet port for ILOM for remote management

The X8-2 HC server requires Oracle Exadata System Software release 19.2.0 or later. The X8M-2 HC server requires Oracle Exadata System Software release 19.3.0 or later.

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.9 Extended Exadata Storage Server X8-2 and X8M-2 Hardware Components

Exadata Extended (XT) Storage Server and X8M-2 Extended (XT) servers include the following components:

  • 1x 16-core Intel Xeon 5218 Processor (2.3GHz)
  • 96 GB RAM (6 x 16 GB DIMMs) – full 6 channels
  • 12 x 14 TB High Capacity SAS disks
  • 2 x 240 GB M.2 devices for system partitions
  • Disk controller HBA with 2 GB cache
  • X8M-2 only: 1 dual-port (PCIe 3.0), both ports active, 100Gb/s RDMA Network Fabric Card
  • X8-2 only: 2 x InfiniBand 4X QDR (40 Gb/s) InfiniBand ports (1 dual-port PCIe 3.0 Host Channel Adapter (HCA)), all ports active
  • 1 Ethernet port for ILOM for remote management

The X8-2 XT server requires Oracle Exadata System Software release 19.2.0 or later. The X8M-2 XT server requires Oracle Exadata System Software release 19.3.0 or later.

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.10 Extreme Flash Exadata Storage Server X7-2 Hardware Components

Oracle Exadata Storage Server X7-2 Extreme Flash servers include the following components:

  • 2x Intel Xeon Silver 4114 Processors (2.20GHz)
  • 192 GB RAM (12 x 16 GB) – full 6 channels
  • 8 x 6.4 TB flash accelerator PCIe cards
  • 2 x 150 GB M.2 devices for system partitions
  • 2 x InfiniBand 4X QDR (40 Gb/s) InfiniBand ports (1 dual-port PCIe 3.0 Host Channel Adapter (HCA)) - all ports active
  • 1 Ethernet port for ILOM for remote management

Requires Oracle Exadata System Software release 18.1.0 or later.

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.11 High Capacity Exadata Storage Server X7-2 Hardware Components

Oracle Exadata Storage Server X7-2 High Capacity servers include the following components:

  • 2x Intel Xeon Silver 4114 Processors (2.20GHz)
  • 192 GB RAM (12 x 16 GB) – full 6 channels
  • 12 x 10 TB High Capacity SAS disks
  • 2 x 150 GB M.2 devices for system partitions
  • 4 x 6.4 TB flash accelerator PCIe cards
  • Disk controller HBA with 2 GB cache
  • 2 x InfiniBand 4X QDR (40 Gb/s) InfiniBand ports (1 dual-port PCIe 3.0 Host Channel Adapter (HCA)) - all ports active
  • 1 Ethernet port for ILOM for remote management

Requires Oracle Exadata System Software release 18.1.0 or later.

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.12 Extreme Flash Exadata Storage Server X6-2 Hardware Components

Oracle Exadata Storage Server X6-2 Extreme Flash servers include the following components:

  • 2 x 10-Core Intel Xeon CPU E5-2630 v4 (2.2 GHz)
  • 128 GB RAM (8 x 16 GB)
  • 8 x 3.2 TB 2.5-inch flash accelerator F320 PCIe drives
  • 2 x InfiniBand 4X QDR (40 Gb/s) InfiniBand ports (1 dual-port PCIe 3.0 Host Channel Adapter (HCA)) - all ports active
  • 4 embedded Gigabit Ethernet ports
  • 1 Ethernet port for ILOM for remote management

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.13 High Capacity Exadata Storage Server X6-2 Hardware Components

Oracle Exadata Storage Server X6-2 High Capacity servers include the following components:

  • 2 x 10-Core Intel Xeon CPU E5-2630 v4 (2.2 GHz)
  • 128 GB RAM (8 x 16 GB)
  • 12 x 8 TB 7.2 K RPM High Capacity SAS disks (in earlier releases, the high capacity disks were 4 TB)
  • 4 x 3.2 TB flash accelerator F320 PCIe card
  • Disk controller HBA with 1 GB cache
  • 2 x InfiniBand 4X QDR (40 Gb/s) InfiniBand ports (1 dual-port PCIe 3.0 Host Channel Adapter (HCA)) - all ports active
  • 4 embedded Gigabit Ethernet ports
  • 1 Ethernet port for ILOM for remote management

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.14 Extreme Flash Exadata Storage Server X5-2 Hardware Components

Oracle Exadata Storage Server X5-2 Extreme Flash servers include the following components:

  • 2 Eight-Core Intel Xeon CPU E5-2630 v3 (2.40GHz)
  • 64 GB RAM (8x 8 GB)
  • 8 x 1.6 TB NVMe PCIe 3.0 SSD Extreme Flash disks
  • 2 InfiniBand 4 X QDR (40 Gb/s) InfiniBand ports (1 dual-port PCIe 3.0 Host Channel Adapter (HCA))
  • 4 embedded Gigabit Ethernet ports
  • 1 Ethernet port for ILOM for remote management

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.15 High Capacity Exadata Storage Server X5-2 Hardware Components

Oracle Exadata Storage Server X5-2 High Capacity servers include the following components:

  • 2 Eight-Core Intel Xeon CPU E5-2630 v3 (2.40GHz)
  • 96 GB RAM (4x 8 GB and 4x 16 GB)
  • 12 x 8 TB 7.2 K RPM High Capacity SAS disks (in earlier releases, the high capacity disks were 4 TB)
  • 4 x 1.6 TB flash accelerator F160 PCIe cards
  • Disk controller HBA with 1 GB supercap-backed write cache
  • 2 InfiniBand 4 X QDR (40 Gb/s) InfiniBand ports (1 dual-port PCIe 3.0 Host Channel Adapter (HCA))
  • 4 embedded Gigabit Ethernet ports
  • 1 Ethernet port for ILOM for remote management

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.16 Exadata Storage Server X4-2L Hardware Components

Oracle Exadata Storage Server X4-2L servers include the following components:

  • 2 Six-Core Intel Xeon E5-2630 v2 processors (2.6 GHz)
  • 96 GB RAM (4 x 8 GB, and 4 x 16 GB))
  • 12 x 1.2 TB 10 K RPM High Performance SAS disks or 12 x 4 TB 7.2 K RPM High Capacity SAS disks
  • 4 x 800 GB Sun Flash Accelerator F80 PCIe Cards
  • Disk controller HBA with 512 MB battery-backed write cache, and swappable BBU
  • 2 InfiniBand 4 X QDR (40 Gb/s) InfiniBand ports (1 dual-port PCIe 3.0 Host Channel Adapter (HCA))
  • 4 embedded Gigabit Ethernet ports
  • 1 Ethernet port for ILOM for remote management

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.17 Exadata Storage Server X3-2L Hardware Components

Oracle Exadata Storage Server X3-2L servers include the following components:

  • 2 Six-Core Intel Xeon E5-2630L processors (2 GHz)
  • 64 GB RAM (8 x 8 GB)
  • 12 x 600 GB 15 K RPM High Performance SAS disks or 12 x 3 TB 7.2 K RPM High Capacity SAS disks
  • 4 x 400 GB Sun Flash Accelerator F40 PCIe Cards
  • Disk controller HBA with 512 MB battery-backed write cache
  • 2 InfiniBand 4 X QDR (40 Gb/s) InfiniBand ports (1 dual-port PCIe 2.0 Host Channel Adapter (HCA))
  • 4 embedded Gigabit Ethernet ports
  • 1 Ethernet port for ILOM for remote management

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.18 Exadata Storage Server with Sun Fire X4270 M2 Servers Hardware Components

Oracle Exadata Storage Server with Sun Fire X4270 M2 Servers include the following components:

  • 2 Six-Core Intel Xeon L5640 processors (2.26 GHz)
  • 24 GB RAM
  • 12 x 600 GB 15 K RPM High Performance SAS disks or 12 x 3 TB 7.2 K RPM High Capacity SAS disks (in earlier releases, the high capacity disks were 2 TB)
  • 4 x 96 GB Sun Flash Accelerator F20 PCIe Cards
  • Disk controller HBA with 512 MB battery-backed write cache
  • Dual-port 4X QDR (40 Gb/s) InfiniBand Host Channel Adapter (HCA)
  • 1 embedded Gigabit Ethernet port
  • 1 Ethernet port for ILOM for remote management

Parent topic: Oracle Exadata Storage Server Hardware Components

10.3.19 Exadata Storage Server with Sun Fire X4275 Servers Hardware Components

Oracle Exadata Storage Server with Sun Fire X4275 Servers include the following components:

  • 2 Quad-Core Intel Xeon E5540 processors (2.53 GHz)
  • 24 GB RAM
  • 12 x 600 GB 15 K RPM High Performance SAS disks or 12 x 2 TB 7.2 K RPM SATA disks
  • 4 x 96 GB Sun Flash Accelerator F20 PCIe Cards
  • Disk controller HBA with 512 MB battery-backed write cache
  • Dual-port 4X QDR (40 Gb/s) InfiniBand Host Channel Adapter (HCA)
  • 1 embedded Gigabit Ethernet port
  • 1 Ethernet port for ILOM for remote management

Parent topic: Oracle Exadata Storage Server Hardware Components

10.4 Spares Kit Components for Oracle Exadata Database Machine

Table 10-3 Spare Kit Components for Exadata Database Machine by Model

SystemSpare Kit Contents
Oracle Exadata Database Machine X10M

Note: No spares kit is included with Oracle Exadata Database Machine X10M. Spare hard disk drives and flash devices may be purchased separately.
Oracle Exadata Database Machine X9M-2 and X9M-8
  • 1 x 18 TB disk for High Capacity storage servers only
  • 1 x 6.4 TB NVMe PCI Flash card
Oracle Exadata Database Machine X8M-2, X8M-8, X8-2, and X8-8 Full Rack, Half Rack, Quarter Rack, and Eighth Rack
  • 1 x 14 TB SAS disk for High Capacity storage servers only
  • 1 x Flash Accelerator F640 or F640v2 PCIe card
Oracle Exadata Database Machine X7-2 and X7-8 Full Rack, Half Rack, Quarter Rack, and Eighth Rack
  • 1 x 10 TB 7.2 K RPM SAS disk for High Capacity storage servers only
  • 1 x Flash Accelerator F640 PCIe card
Oracle Exadata Database Machine X6-2 Full Rack, Half Rack, Quarter Rack, and Eighth Rack
  • 1 x 8 TB 7.2 K RPM High Capacity SAS disk
  • 1 x flash accelerator F320 PCIe card for high capacity storage servers only
Oracle Exadata Database Machine X5-2 Full Rack, Half Rack, Quarter Rack, and Eighth Rack
  • 1 x 8 TB 7.2 K RPM High Capacity SAS disk
  • 1 x flash accelerator F160 PCIe card for high capacity storage servers only
  • 1 x 1.6 TB solid-state drive for extreme flash storage servers only
Oracle Exadata Database Machine X5-8 and X6-8
  • 1 x 8 TB 7.2 K RPM High Capacity SAS disk
  • 1 x flash accelerator F160 PCIe card for high capacity storage servers only
Oracle Exadata Database Machine X4-2 Full Rack, Half Rack, Quarter Rack, and Eighth Rack
  • 1 x 1.2 TB 10 K RPM High Performance SAS disks or 1 x 4 TB 7.2 K RPM High Capacity SAS disks
  • 1 x 800 GB Exadata Smart Flash Cache card
Oracle Exadata Database Machine X4-8
  • 1 x 1.6 TB NVMe PCIe 3.0 High Performance or 1 x 4 TB 7.2 K RPM High Capacity SAS disks
  • 1 x flash accelerator F160 PCIe card for high capacity storage servers only
Oracle Exadata Database Machine X3-2 Full Rack
  • 2 x 600 GB 15 K RPM High Performance SAS disks or 2 x 3 TB 7.2 K RPM High Capacity SAS disks
  • 2 x 400 GB Exadata Smart Flash Cache cards
  • 6 x 3 m, and 10 x 5 m InfiniBand cables
Oracle Exadata Database Machine X3-2 Half Rack
  • 1 x 600 GB 15 K RPM High Performance SAS disks or 1 x 3 TB 7.2 K RPM High Capacity SAS disks
  • 1 x 400 GB Exadata Smart Flash Cache card
  • 6 x 3 m, and 10 x 5 m InfiniBand cables
Oracle Exadata Database Machine X3-2 Quarter Rack and Eighth Rack
  • 1 x 600 GB 15 K RPM High Performance SAS disks or 1 x 3 TB 7.2 K RPM High Capacity SAS disks
  • 1 x 400 GB Exadata Smart Flash Cache card
  • 4 x 5 m InfiniBand cables
Oracle Exadata Database Machine X3-8 Full Rack with Exadata Storage Server X4-2L Servers
  • 1 x 1.2 TB 10 K RPM High Performance SAS disks or 1 x 4 TB 7.2 K RPM High Capacity SAS disks
  • 1 x 400 GB Exadata Smart Flash Cache card
Oracle Exadata Database Machine X3-8 Full Rack with Exadata Storage Server X3-2 Servers
  • 2 x 600 GB 15 K RPM High Performance SAS disks or 2 x 3 TB 7.2 K RPM High Capacity SAS disks
  • 2 x 400 GB Exadata Smart Flash Cache cards
  • 6 x 3 m, and 10 x 5 m InfiniBand cables
Oracle Exadata Database Machine X2-2 and Oracle Exadata Database Machine X2-8 Full Rack
  • 2 x 600 GB 15 K RPM High Performance SAS disks or 2 x 3 TB 7.2 K RPM High Capacity SAS disks
  • 2 x 96 GB Exadata Smart Flash Cache cards
  • 6 x 3 m, and 10 x 5 m InfiniBand cables

Note:

The Oracle Exadata Database Machine X2-2 (with X4170 and X4275 servers) models have 2 TB High Capacity SATA drives.
Oracle Exadata Database Machine X2-2 and Oracle Exadata Database Machine X2-8 Half Rack
  • 1 x 600 GB 15 K RPM High Performance SAS disks or 1 x 3 TB 7.2 K RPM High Capacity SAS disks
  • 1 x 96 GB Exadata Smart Flash Cache card
  • 6 x 3 m, and 10 x 5 m InfiniBand cables

Note:

The Oracle Exadata Database Machine X2-2 (with X4170 and X4275 servers) models have 2 TB High Capacity SATA drives.
Oracle Exadata Database Machine X2-2 and Oracle Exadata Database Machine X2-8 Quarter Rack
  • 1 x 600 GB 15 K RPM High Performance SAS disks or 1 x 3 TB 7.2 K RPM High Capacity SAS disks
  • 1 x 96 GB Exadata Smart Flash Cache card
  • 4 x 5 m InfiniBand cables

Note:

The Oracle Exadata Database Machine X2-2 (with X4170 and X4275 servers) models have 2 TB High Capacity SATA drives.

相關文章