【AIX】IBM power4 SMS配置網路卡為百兆全雙工模式
power4 SMS配置網路卡百兆全雙工模式
使用nim伺服器向客戶端推裝系統時，網路能夠ping通，但資料包傳輸速度非常慢
檢視發現客戶端網路卡自動協商後使用了半雙工模式，實際應該使用百兆全雙工
進入SMS設定對應網路卡全雙工模式
1.1 串列埠線啟動系統
Service Processor Firmware
Version: 3R080425
Copyright 2001, IBM Corporation
109AFFA
________________________________
MAIN MENU
1. Service Processor Setup Menu
2. System Power Control Menu
3. System Information Menu
4. Language Selection Menu
5. Call-In/Call-Out Setup Menu
6. Set System Name
99. Exit from Menus
0> 2
SYSTEM POWER CONTROL MENU
1. Enable/Disable Unattended Start Mode:
Currently Disabled
2. Ring Indicate Power-On Menu
3. Reboot/Restart Policy Setup Menu
4. Power-On System
5. Power-Off System
6. Enable/Disable Fast System Boot:
Currently Fast Boot
7. Boot Mode Menu
98. Return to Previous Menu
99. Exit from Menus
0> 4
WARNING: POWERING SYSTEM WILL EXIT MENUS!
Enter "Y" to continue, any other key to abort.
0> y
Please wait....
SYSTEM POWER CONTROL MENU
1. Enable/Disable Unattended Start Mode:
Currently Disabled
2. Ring Indicate Power-On Menu
3. Reboot/Restart Policy Setup Menu
4. Power-On System
5. Power-Off System
6. Enable/Disable Fast System Boot:
Currently Fast Boot
7. Boot Mode Menu
98. Return to Previous Menu
99. Exit from Menus
Please wait....
System Powering On. Exiting menus.
9022
9101
90FD
9102
9103
9104
9105
9119
9106
9107
9200
9400
9108
9250
9251
9202
9400
9109
9301
9302
9400
910A
910B
910C
96C3
96C4
910D
96C2
910E
96C6
910F
9501
950B
9506
911D
9110
9111
9112
9113
96C7
96E1
96E2
9114
911E
9115
9116
911F
9117
*** FCode LP9802 PCI_Bus (lpfc) Version 1.33a1 ***
1.2 按數字1 進入SMS
1 = SMS Menu 5 = Default Boot List
6 = Stored Boot List 8 = Open Firmware Prompt
memory keyboard network scsi speaker
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Main Menu
1. Select Language
2. Change Password Options
3. View Error Log
4. Setup Remote IPL (Initial Program Load)
5. Change SCSI Settings
6. Select Console
7. Select Boot Options
-------------------------------------------------------------------------------
Navigation Keys:
X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:4
1.3 選擇要修改的網路卡
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
NIC Adapters
Device Slot Hardware Address
1. 10/100 Mbps Ethernet PCI Adapt Integ:U0.1-P1/E2 0002554f6254
2. 10/100 Mbps Ethernet PCI Adapt 1:U0.1-P2-I1/E1 0002556f7044
3. 10/100 Mbps Ethernet PCI Adapt Integ:U0.1-P1/E1 0002554f6255
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:3
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Network Parameters
10/100 Mbps Ethernet PCI Adapter II: U0.1-P1/E1
1. IP Parameters
2. Adapter Configuration
3. Ping Test
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:2
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Adapter Configuration
10/100 Mbps Ethernet PCI Adapter II: U0.1-P1/E1
1. Speed,Duplex
2. Spanning Tree Enabled
3. Protocol
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:1
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Speed,Duplex
10/100 Mbps Ethernet PCI Adapter II: U0.1-P1/E1
1. auto,auto ( rj45 ) <===
2. 10,half ( rj45 )
3. 10,full ( rj45 )
4. 100,half ( rj45 )
5. 100,full ( rj45 )
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:5
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Speed,Duplex
10/100 Mbps Ethernet PCI Adapter II: U0.1-P1/E1
1. auto,auto ( rj45 )
2. 10,half ( rj45 )
3. 10,full ( rj45 )
4. 100,half ( rj45 )
5. 100,full ( rj45 ) <===
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:
pSeries Firmware
Version RG080425_d79e22_regatta
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Adapter Configuration
10/100 Mbps Ethernet PCI Adapter II: U0.1-P1/E1
1. Speed,Duplex
2. Spanning Tree Enabled
3. Protocol
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press
Enter or select Navigation Key:
呂星昊
2016.2.19
來自 “ ITPUB部落格 ” ，連結：http://blog.itpub.net/29475508/viewspace-1991386/，如需轉載，請註明出處，否則將追究法律責任。
相關文章
- 關於AIX雙網路卡繫結AI
- 配置雙網路卡BOND
- 雙網路卡BOND配置
- AIX中為單網路卡配置多IP地址(轉)AI
- Linux 雙網路卡雙IP配置Linux
- 雙網路卡bonding配置
- OpenHarmony雙網路卡配置例項
- AIX 網路卡AI
- zt_ibm_為 AIX 配置 InfinibandIBMAI
- aix刪除網路卡並重新配置AI
- 電腦網路卡是什麼？如何看網路卡是千兆還是百兆？
- AIX 5L網路卡管理與配置AI
- [轉]AIX 5L網路卡管理與配置AI
- 單工，半雙工，全雙工通訊區別
- Oracle 11gR2 RAC 單網路卡轉雙網路卡繫結配置Oracle
- AIX 5L上管理網路卡以及檢視配置AI
- 深度分析Linux下雙網路卡繫結七種模式 多網路卡的7種bond模式原理Linux模式
- AIX 5L上管理網路卡以及檢視配置【轉】AI
- AIX 5L上管理網路卡以及檢視配置IAI
- 雙網路卡繫結
- HP APA模式設定導致雙網路卡丟包模式
- win10系統如何檢視網路卡是千兆還是百兆Win10
- CentOS 5.4上雙網路卡（多網路卡）繫結CentOS
- 全雙工通訊的 WebSocketWeb
- Linux系統下雙網路卡bonding的配置方法Linux
- VMwareNAT網路卡配置
- 雙網路卡共享上網設定
- 【AIX】IBM power5 hmc配置固定ipAIIBM
- Linux下雙網路卡繫結bond配置例項詳解Linux
- Linux作業系統下雙網路卡路由表配置Linux作業系統路由
- linux雙網路卡繫結Linux
- Linux雙網路卡聚合改造Linux
- redhat 6.3 雙網路卡繫結Redhat
- Linux 繫結雙網路卡Linux
- Linux 雙網路卡繫結Linux
- Redhat AS 5.4 雙網路卡繫結Redhat
- centos 6.5 雙網路卡繫結CentOS
- 【轉】redhat 雙網路卡繫結Redhat