【OH】Creating a Database with the CREATE DATABASE Statement

Step 1: Specify an Instance Identifier (SID)

Decide on a unique Oracle system identifier (SID) for your instance, open a command window, and set the ORACLE_SID environment variable. Use this command window for the subsequent steps.

ORACLE_SID is used to distinguish this instance from other Oracle Database instances that you may create later and run concurrently on the same host computer. Restrictions related to the valid characters in an ORACLE_SID are platform-specific. On some platforms, the SID is case-sensitive.

The following example for UNIX and Linux operating systems sets the SID for the instance that you will connect to in :

• Bourne, Bash, or Korn shell:

  ORACLE_SID=mynewdb
  export ORACLE_SID
  

• C shell:

  setenv ORACLE_SID mynewdb
  

The following example sets the SID for the Windows operating system:

set ORACLE_SID=mynewdb

Step 2: Ensure That the Required Environment Variables Are Set

Depending on your platform, before you can start SQL*Plus (as required in ), you may have to set environment variables, or at least verify that they are set properly.

For example, on most platforms, ORACLE_SID and ORACLE_HOME must be set. In addition, it is advisable to set the PATH variable to include the ORACLE_HOME/bin directory. On the UNIX and Linux platforms, you must set these environment variables manually. On the Windows platform, OUI automatically assigns values to ORACLE_HOME and ORACLE_SID in the Windows registry. If you did not create a database upon installation, OUI does not set ORACLE_SID in the registry, and you will have to set the ORACLE_SID environment variable when you create your database later.

Step 3: Choose a Database Administrator Authentication Method

You must be authenticated and granted appropriate system privileges in order to create a database. You can be authenticated as an administrator with the required privileges in the following ways:

• With a password file

• With operating system authentication

In this step, you decide on an authentication method.

To be authenticated with a password file, create the password file as described in . To be authenticated with operating system authentication, ensure that you log in to the host computer with a user account that is a member of the appropriate operating system user group. On the UNIX and Linux platforms, for example, this is typically the dba user group. On the Windows platform, the user installing the Oracle software is automatically placed in the required user group.

Step 4: Create the Initialization Parameter File

When an Oracle instance starts, it reads an initialization parameter file. This file can be a text file, which can be created and modified with a text editor, or a binary file, which is created and dynamically modified by the database. The binary file, which is preferred, is called a server parameter file. In this step, you create a text initialization parameter file. In a later step, you create a server parameter file from the text file.

One way to create the text initialization parameter file is to edit the sample presented in .

If you create the initialization parameter file manually, ensure that it contains at least the parameters listed in . All other parameters not listed have default values.

For convenience, store your initialization parameter file in the Oracle Database default location, using the default file name. Then when you start your database, it will not be necessary to specify thePFILE clause of the STARTUP command, because Oracle Database automatically looks in the default location for the initialization parameter file.

For more information about initialization parameters and the initialization parameter file, including the default name and location of the initialization parameter file for your platform, see .

Step 5: (Windows Only) Create an Instance

On the Windows platform, before you can connect to an instance, you must manually create it if it does not already exist. The ORADIM command creates an Oracle instance by creating a new Windows service.

To create an instance:

• Enter the following command at a Windows command prompt:

  oradim -NEW -SID sid -STARTMODE MANUAL -PFILE pfile 

  where sid is the desired SID (for example mynewdb) and pfile is the full path to the text initialization parameter file. This command creates the instance but does not start it.

See the section "Using ORADIM to Administer an Oracle Database Instance" in  for more information on the ORADIM command.

Step 6: Connect to the Instance

Start SQL*Plus and connect to your Oracle Database instance with the SYSDBA system privilege.

• To authenticate with a password file, enter the following commands, and then enter the SYS password when prompted:

  $ sqlplus /nolog
  SQL> CONNECT SYS AS SYSDBA
  

• To authenticate with operating system authentication, enter the following commands:

  $ sqlplus /nolog
  SQL> CONNECT / AS SYSDBA
  

SQL*Plus outputs the following message:

Connected to an idle instance.

Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options

Step 7: Create a Server Parameter File

The server parameter file enables you to change initialization parameters with the ALTER SYSTEM command and persist the changes across a database shutdown and startup. You create the server parameter file from your edited text initialization file.

The following SQL*Plus command reads the text initialization parameter file (PFILE) with the default name from the default location, creates a server parameter file (SPFILE) from the text initialization parameter file, and writes the SPFILE to the default location with the default SPFILE name.

CREATE SPFILE FROM PFILE;

You can also supply the file name and path for both the PFILE and SPFILE if you are not using default names and locations.

Step 8: Start the Instance

Start an instance without mounting a database. Typically, you do this only during database creation or while performing maintenance on the database. Use the STARTUP command with the NOMOUNTclause. In this example, because the initialization parameter file or server parameter file is stored in the default location, you are not required to specify the PFILE clause:

STARTUP NOMOUNT

At this point, the instance memory is allocated and its processes are started. The database itself does not yet exist.

Step 9: Issue the CREATE DATABASE Statement

To create the new database, use the CREATE DATABASE statement.

Example 1

The following statement creates database mynewdb. This database name must agree with the DB_NAME parameter in the initialization parameter file. This example assumes the following:

• The initialization parameter file specifies the number and location of control files with the CONTROL_FILES parameter.

• The directory /u01/app/oracle/oradata/mynewdb exists.

• The directories /u01/logs/my and /u02/logs/my exist.

CREATE DATABASE mynewdb
   USER SYS IDENTIFIED BY sys_password USER SYSTEM IDENTIFIED BY system_password LOGFILE GROUP 1 ('/u01/logs/my/redo01a.log','/u02/logs/my/redo01b.log') SIZE 100M BLOCKSIZE 512,
           GROUP 2 ('/u01/logs/my/redo02a.log','/u02/logs/my/redo02b.log') SIZE 100M BLOCKSIZE 512,
           GROUP 3 ('/u01/logs/my/redo03a.log','/u02/logs/my/redo03b.log') SIZE 100M BLOCKSIZE 512
   MAXLOGFILES 5
   MAXLOGMEMBERS 5
   MAXLOGHISTORY 1
   MAXDATAFILES 100
   CHARACTER SET AL32UTF8
   NATIONAL CHARACTER SET AL16UTF16
   EXTENT MANAGEMENT LOCAL
   DATAFILE '/u01/app/oracle/oradata/mynewdb/system01.dbf' SIZE 325M REUSE
   SYSAUX DATAFILE '/u01/app/oracle/oradata/mynewdb/sysaux01.dbf' SIZE 325M REUSE
   DEFAULT TABLESPACE users
      DATAFILE '/u01/app/oracle/oradata/mynewdb/users01.dbf'
      SIZE 500M REUSE AUTOEXTEND ON MAXSIZE UNLIMITED
   DEFAULT TEMPORARY TABLESPACE tempts1
      TEMPFILE '/u01/app/oracle/oradata/mynewdb/temp01.dbf'
      SIZE 20M REUSE
   UNDO TABLESPACE undotbs
      DATAFILE '/u01/app/oracle/oradata/mynewdb/undotbs01.dbf'
      SIZE 200M REUSE AUTOEXTEND ON MAXSIZE UNLIMITED;

A database is created with the following characteristics:

• The database is named mynewdb. Its global database name is mynewdb.us.example.com, where the domain portion (us.example.com) is taken from the initialization parameter file. See.

• Three control files are created as specified by the CONTROL_FILES initialization parameter, which was set before database creation in the initialization parameter file. See  and .

• The passwords for user accounts SYS and SYSTEM are set to the values that you specified. Beginning with Release 11g, the passwords are case-sensitive. The two clauses that specify the passwords for SYS and SYSTEM are not mandatory in this release of Oracle Database. However, if you specify either clause, then you must specify both clauses. For further information about the use of these clauses, see .

• The new database has three redo log file groups, each with two members, as specified in the LOGFILE clause. MAXLOGFILES, MAXLOGMEMBERS, and MAXLOGHISTORY define limits for the redo log. See . The block size for the redo logs is set to 512 bytes, the same size as physical sectors on disk. The BLOCKSIZE clause is optional if block size is to be the same as physical sector size (the default). Typical sector size and thus typical block size is 512. Permissible values for BLOCKSIZE are 512, 1024, and 4096. For newer disks with a 4K sector size, optionally specify BLOCKSIZE as 4096. See  for more information.

• MAXDATAFILES specifies the maximum number of data files that can be open in the database. This number affects the initial sizing of the control file.

  Note:

  You can set several limits during database creation. Some of these limits are limited by and affected by operating system limits. For example, if you set MAXDATAFILES, Oracle Database allocates enough space in the control file to store MAXDATAFILES filenames, even if the database has only one data file initially. However, because the maximum control file size is limited and operating system dependent, you might not be able to set all CREATE DATABASE parameters at their theoretical maximums.

  For more information about setting limits during database creation, see the  and your operating system–specific Oracle documentation.

• The AL32UTF8 character set is used to store data in this database.

• The AL16UTF16 character set is specified as the NATIONAL CHARACTER SET, used to store data in columns specifically defined as NCHAR, NCLOB, or NVARCHAR2.

• The SYSTEM tablespace, consisting of the operating system file /u01/app/oracle/oradata/mynewdb/system01.dbf is created as specified by the DATAFILE clause. If a file with that name already exists, then it is overwritten.

• The SYSTEM tablespace is created as a locally managed tablespace. See .

• A SYSAUX tablespace is created, consisting of the operating system file /u01/app/oracle/oradata/mynewdb/sysaux01.dbf as specified in the SYSAUX DATAFILE clause. See .

• The DEFAULT TABLESPACE clause creates and names a default permanent tablespace for this database.

• The DEFAULT TEMPORARY TABLESPACE clause creates and names a default temporary tablespace for this database. See .

• The UNDO TABLESPACE clause creates and names an undo tablespace that is used to store undo data for this database if you have specified UNDO_MANAGEMENT=AUTO in the initialization parameter file. If you omit this parameter, it defaults to AUTO. See .

• Redo log files will not initially be archived, because the ARCHIVELOG clause is not specified in this CREATE DATABASE statement. This is customary during database creation. You can later use an ALTER DATABASE statement to switch to ARCHIVELOG mode. The initialization parameters in the initialization parameter file for mynewdb relating to archiving are LOG_ARCHIVE_DEST_1 andLOG_ARCHIVE_FORMAT. See .

Example 2

This example illustrates creating a database with Oracle Managed Files, which enables you to use a much simpler CREATE DATABASE statement. To use Oracle Managed Files, the initialization parameter DB_CREATE_FILE_DEST must be set. This parameter defines the base directory for the various database files that the database creates and automatically names. The following statement is an example of setting this parameter in the initialization parameter file:

DB_CREATE_FILE_DEST='/u01/app/oracle/oradata'

With Oracle Managed Files and the following CREATE DATABASE statement, the database creates the SYSTEM and SYSAUX tablespaces, creates the additional tablespaces specified in the statement, and chooses default sizes and properties for all data files, control files, and redo log files. Note that these properties and the other default database properties set by this method may not be suitable for your production environment, so it is recommended that you examine the resulting configuration and modify it if necessary.

CREATE DATABASE mynewdb
USER SYS IDENTIFIED BY sys_password USER SYSTEM IDENTIFIED BY system_password EXTENT MANAGEMENT LOCAL
DEFAULT TEMPORARY TABLESPACE temp
UNDO TABLESPACE undotbs1
DEFAULT TABLESPACE users;

Step 10: Create Additional Tablespaces

To make the database functional, you must create additional tablespaces for your application data. The following sample script creates some additional tablespaces:

CREATE TABLESPACE apps_tbs LOGGING 
     DATAFILE '/u01/app/oracle/oradata/mynewdb/apps01.dbf' 
     SIZE 500M REUSE AUTOEXTEND ON NEXT  1280K MAXSIZE UNLIMITED 
     EXTENT MANAGEMENT LOCAL;
-- create a tablespace for indexes, separate from user tablespace (optional)
CREATE TABLESPACE indx_tbs LOGGING 
     DATAFILE '/u01/app/oracle/oradata/mynewdb/indx01.dbf' 
     SIZE 100M REUSE AUTOEXTEND ON NEXT  1280K MAXSIZE UNLIMITED 
     EXTENT MANAGEMENT LOCAL;

For information about creating tablespaces, see .

Step 11: Run Scripts to Build Data Dictionary Views

Run the scripts necessary to build data dictionary views, synonyms, and PL/SQL packages, and to support proper functioning of SQL*Plus.

In SQL*Plus, connect to your Oracle Database instance with the SYSDBA administrative privilege:

@?/rdbms/admin/catalog.sql
@?/rdbms/admin/catproc.sql
@?/rdbms/admin/utlrp.sql

In SQL*Plus, connect to your Oracle Database instance as SYSTEM user:

@?/sqlplus/admin/pupbld.sql

The at-sign (@) is shorthand for the command that runs a SQL*Plus script. The question mark (?) is a SQL*Plus variable indicating the Oracle home directory. The following table contains descriptions of the scripts:

Step 12: (Optional) Run Scripts to Install Additional Options

You may want to run other scripts. The scripts that you run are determined by the features and options you choose to use or install. Many of the scripts available to you are described in the 

If you plan to install other Oracle products to work with this database, then see the installation instructions for those products. Some products require you to create additional data dictionary tables. Usually, command files are provided to create and load these tables into the database data dictionary.

See your Oracle documentation for the specific products that you plan to install for installation and administration instructions.

Step 13: Back Up the Database.

Take a full backup of the database to ensure that you have a complete set of files from which to recover if a media failure occurs. For information on backing up a database, see 

Step 14: (Optional) Enable Automatic Instance Startup

You might want to configure the Oracle instance to start automatically when its host computer restarts. See your operating system documentation for instructions. For example, on Windows, use the following command to configure the database service to start the instance upon computer restart:

ORADIM -EDIT -SID sid -STARTMODE AUTO -SRVCSTART SYSTEM [-SPFILE]

You must use the -SPFILE argument if you want the instance to read an SPFILE upon automatic restart.

About Me

...............................................................................................................................................................................

本文來自於oracle官方文件，地址：

本文地址： http://blog.itpub.net/26736162/viewspace-2098211/

ITPUB BLOG：http://blog.itpub.net/26736162

QQ：642808185 若加QQ請註明您所正在讀的文章標題

【版權所有，文章允許轉載，但須以連結方式註明源地址，否則追究法律責任】

...............................................................................................................................................................................