LNMP一鍵自動安裝指令碼

科技小先鋒發表於2017-11-14

LNMP指令碼

此指令碼以在任何一臺有網路的伺服器上自動配置LNMP

使用方法：將inst_lnmp程式碼儲存一個檔案，例如inst_lnmp.sh 上傳到伺服器上執行。

此指令碼在CentOS 6.0 X864環境下通過。

參考文章 http://os.51cto.com/art/201110/295713.htm

#!/bin/bash
#set -x
#date: 2013-01-06
#Description: 一鍵安裝LNMP環境
#Version: 0.1
#Author: Wolf
#定義命令搜尋路徑
PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin
export PATH
src_dir=/usr/src
nginx_dir=/usr/local/nginx
mysql_dir=/usr/local/mysql
php_dir=/usr/local/php
libmcrypt_dir=/usr/local/libmcypt
#關閉SELiunx
echo “Disabled SELinux”
if [ -s /etc/selinux/config ]
then
sed -i `s/SELINUX=enforcing/SELINUX=disabled/g` /etc/selinux/config
fi
/usr/sbin/setenforce 0
# Check if user is root
if [ “$UID” -ne 0 ]
then
printf “Error: You must be root to run this script!
“
exit 1
fi
useradd -s /sbin/nologin mysql
#檢查需要的軟體包是否存在，如果沒有就下載。
download_src(){
cd $src_dir
if [ -s libiconv-1.13.1.tar.gz ]
then
echo “libiconv-1.13.1.tar.gz found”
else
echo “libiconv-1.13.1.tar.gz not found. download new….”
wget http://mozbuildtools.googlecode.com/files/libiconv-1.13.1.tar.gz
fi
if [ -s mhash-0.9.9.9.tar.gz ]
then
echo “mhash-0.9.9.9.tar.gz found”
else
echo “mhash-0.9.9.9.tar.gz not found. download new…..”
wget http://acelnmp.googlecode.com/files/mhash-0.9.9.9.tar.gz
fi
if [ -s mysql-5.5.25a.tar.gz ]
then
echo “mysql-5.5.25a.tar.gz found”
else
echo “mysql-5.5.25a.tar.gz not found. download new…..”
wget http://mysql.ntu.edu.tw/Downloads/MySQL-5.5/mysql-5.5.25a.tar.gz
fi
if [ -s php-5.3.13.tar.gz ]
then
echo “php-5.3.13.tar.gz found”
else
echo “php-5.3.13.tar.gz not found. download new…..”
wget http://cn2.php.net/distributions/php-5.3.13.tar.gz
fi
if [ -s google-perftools-1.6.tar.gz ]
then
echo “google-perftools-1.6.tar.gz found”
else
echo “google-perftools-1.6.tar.gz not found. download new…..”
wget http://gperftools.googlecode.com/files/google-perftools-1.6.tar.gz
fi
if [ -s cmake-2.8.4.tar.gz ]
then
echo “cmake-2.8.4.tar.gz found……”
else
echo “cmake-2.8.4.tar.gz not found. download new…..”
wget http://www.cmake.org/files/v2.8/cmake-2.8.4.tar.gz
fi
if [ -s nginx-1.3.10.tar.gz ]
then
echo “nginx-1.3.10.tar.gz found.”
else
echo “nginx-1.3.10.tar.gz not found. download new….”
wget http://www.nginx.org/download/nginx-1.3.10.tar.gz
fi
if [ -s libmcrypt-2.5.7.tar.gz ]
then
echo “libmcrypt-2.5.7.tar.gz found”
else
echo “libmcrypt-2.5.7.tar.gz not found. download new…”
wget http://nchc.dl.sourceforge.net/project/mcrypt/Libmcrypt/Production/libmcrypt-2.5.7.tar.gz
fi
if [ -s memcache-2.2.5.tgz ]
then
echo “memcache-2.2.5.tgz found”
else
echo “memcache-2.2.5.tgz not found. download new……”
wget http://vps.googlecode.com/files/memcache-2.2.5.tgz
fi
if [ -s eaccelerator-0.9.5.3.tar.bz2 ]
then
echo “eaccelerator-0.9.5.3.tar.bz2 found”
else
echo “eaccelerator-0.9.5.3.tar.bz2 not found. download new..”
wget http://autosetup1.googlecode.com/files/eaccelerator-0.9.5.3.tar.bz2
fi
if [ -s ImageMagick.tar.gz ]
then
echo “ImageMagick.tar.gz found”
else
echo “ImageMagick.tar.gz not found. download nrw.”
wget http://www.imagemagick.org/download/ImageMagick.tar.gz
fi
if [ -s imagick-2.3.0.tgz ]
then
echo “imagick-2.3.0.tgz found”
else
echo “imagick-2.3.0.tgz not found. download new”
wget http://lnmpp.googlecode.com/files/imagick-2.3.0.tgz
fi
}
#初始化伺服器
init_server(){
for src in dialog ntp vim-enhanced vixie-cron gcc gcc-c++ gcc-g77 flex bison autoconf automake glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel libtool* zlib-devel libxml2-devel libjpeg-devel libpng-devel libtiff-devel fontconfig-devel freetype-devel libXpm-devel gettext-devel curl curl-devel pam-devel e2fsprogs-devel krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel net-snmp net-snmp-devel nss_ldap openldap-clients openldap-servers libtidy libtidy-devel wget libc-client libc-client-devel pcre pcre-devel
do
yum -y install $src
done
ln -s /usr/lib64/libc-client.so* /usr/lib/
ln -s /usr/lib64/libldap* /usr/lib
}
#先檢測mysql是否已經安裝，如果已經安裝了就不再安裝，如果沒安裝就安裝mysql
inst_mysql(){
tar zxvf cmake-2.8.4.tar.gz
cd $src_dir/cmake-2.8.4
./configure && make && make install
if ( -d $mysql_dir )
then
echo “MySQL is installed”
else
echo “MySQL not install. install run…”
cd $src_dir
tar zxvf mysql-5.5.25a.tar.gz
cd mysql-5.5.25a
cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mysql -DMYSQL_DATADIR=/usr/local/mysql/data -DSYSCONFDIR=/etc -DWITH_INNOBASE_STORAGE_ENGINE=1 -DWITH_ARCHIVE_STORAGE_ENGINE=1 -DWITH_BLACKHOLE_STORAGE_ENGINE=1 -DWITH_FEDERATED_STORAGE_ENGINE=1 -DWITH_PARTITION_STORAGE_ENGINE=1 -DMYSQL_TCP_PORT=3306 -DENABLED_LOCAL_INFILE=1 -DWITH_SSL=yes -DEXTRA_CHARSETS=all -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DWITH_READLINE=on
gmake && make install
fi
if ( -f /ect/my.cnf )
then
echo “MySQL config file my.cnf found. backup my.cnf to my.cnf.bak”
mv /etc/my.cnf /etc/my.cnf.bak
/bin/cp support-files/my-small.cnf /etc/my.cnf
/bin/cp support-files/mysql.server /etc/rc.d/init.d/mysqld
chmod 755 /etc/rc.d/init.d/mysqld
fi
/usr/local/mysql/scripts/mysql_install_db –basedir=/usr/local/mysql/ –datadir=/usr/local/mysql/data/ –user=root –defaults-file=/etc/my.cnf
}
inst_libmcypt(){
if ( -d $libmcrypt_dir )
then
echo “libmcrypt is installed.”
else
cd $src_dir
tar zxvf libmcrypt-2.5.7.tar.gz
cd libmcrypt-2.5.7
./configure –prefix=/usr/local/libmcypt && make && make install
/sbin/ldconfig
cd libltdl/
./configure –enable-ltdl-install
make
make install
fi
cd $src_dir
tar zxf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make
make install
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1
}
#先檢測PHP是否已經編譯安裝，如果安裝了就不再進行安裝，如果沒安裝就安裝PHP
inst_php(){
cd $src_dir
tar zxf libiconv-1.13.1.tar.gz
cd libiconv-1.13.1/
./configure –prefix=/usr/local
make
make install
cd $src_dir
if ( -d $php_dir)
then
echo “PHP is installed”
else
echo “PHP not install. install run….”
cd $src_dir
tar zxvf php-5.3.13.tar.gz
cd php-5.3.13
./configure –prefix=/usr/local/php –with-config-file-path=/usr/local/php/lib –with-mysql=/usr/local/mysql/bin/mysql_config –with-enable-sysvsem –enable-fpm –with-openssl –with-zlib –with-bz2 –with-curl –with-libxml-dir=/usr –with-gd –with-jpeg-dir –with-png-dir –with-zlib-dir –enable-gd-native-ttf –enable-gd-jis-conv –without-iconv –with-ldap –with-mcrypt=/usr/local/libmcypt –with-zlib-dir –with-snmp –enable-zip –with-curlwrappers –with-imap –with-kerberos –with-imap-ssl –with-freetype-dir –with-mysql=/usr/local/mysql
make && make install
cp php.ini-development /usr/local/php/lib/php.ini
cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf
fi
}
#安裝PHP擴充套件
inst_php_ex(){
cd $src_dir
tar zxf memcache-2.2.5.tgz
cd memcache-2.2.5/
${php_dir}/bin/phpize
./configure –with-php-config=${php_dir}/bin/php-config
make
make install
cd ../
tar jxf eaccelerator-0.9.5.3.tar.bz2
cd eaccelerator-0.9.5.3
${php_dir}/bin/phpize
./configure –enable-eaccelerator=shared –with-eaccelerator-shared-memory –with-php-config=${php_dir}/bin/php-config
make
make install
cd $src_dir
tar zxf ImageMagick.tar.gz
cd ImageMagick-6.8.1-9/
./configure
make
make install
cd ../
tar zxf imagick-2.3.0.tgz
cd imagick-2.3.0/
${php_dir}/bin/phpize
./configure –with-php-config=${php_dir}/bin/php-config
make
make install
cd ..
echo “php extension installed successfully!”
}
#安裝nginx
inst_nginx(){
cd $src_dir
tar zxf google-perftools-1.6.tar.gz
cd google-perftools*
./configure
make
make install
cd $src_dir
if ( -d $nginx_dir )
then
echo “Nginx is installed”
else
cd $src_dir
tar zxvf nginx-1.3.10.tar.gz
cd nginx-1.3.10
./configure –prefix=/usr/local/nginx –with-http_ssl_module –with-http_stub_status_module –with-http_gzip_static_module –with-http_stub_status_module
make && make install
fi
}
#生成一個PHP啟動指令碼，可以用service phpd start | restart | stop | show 進行啟動、重啟、關閉、檢視執行狀態
phpd(){
cat <<EOF >>phpd
#!/bin/bash
#Author: wolf
#Date: 2013-01-03
#
#chkconfig: – 85 15
#processname: php
php=/usr/local/php/sbin/php-fpm
conf=/usr/local/php/etc/php-fpm.conf
case $1 in
start)
echo -n “Starting php”
$php
echo ” done”
;;
stop)
echo -n “Stopping php”
killall -9 php-fpm
echo ” done”
;;
restart)
$0 stop
$0 start
;;
show)
ps -aux|grep php
;;
*)
echo -n “Usage: $0 {start|restart|reload|stop|test|show}”
;;
esac
EOF
if [ -f phpd ]
then
/bin/cp phpd /etc/rc.d/init.d/phpd
chmod +x /etc/rc.d/init.d/phpd
fi
}
#生成nginx啟動指令碼，可以用service nginxd start | restart | stop | reload | test | show 進行重啟、關閉、啟動>、測試配置檔案、檢視狀態和重新載入。
nginxd(){
cat <<EOF >>nginxd
#!/bin/bash
#Author: wolf
#Date: 2013-01-03
#
#chkconfig: – 85 15
#description: Nginx is a World Wide Web server.
#processname: nginx
nginx=/usr/local/nginx/sbin/nginx
conf=/usr/local/nginx/conf/nginx.conf
case $1 in
start)
echo -n “Starting Nginx”
$nginx -c $conf
echo ” done”
;;
stop)
echo -n “Stopping Nginx”
killall -9 nginx
echo ” done”
;;
test)
$nginx -t -c $conf
;;
reload)
echo -n “Reloading Nginx”
ps auxww | grep nginx | grep master | awk `{print $2}` | xargs kill -HUP
echo ” done”
;;
restart)
$0 stop
$0 start
;;
show)
ps -aux|grep nginx
;;
*)
echo -n “Usage: $0 {start|restart|reload|stop|test|show}”
;;
esac
EOF
if [ -s nginxd ]
then
/bin/cp nginxd /etc/rc.d/init.d/nginxd
chmod +x /etc/rc.d/init.d/nginxd
fi
}
cat <<EOF
############################################
1 install Nginx
2 install PHP
3 install MySQL
4 install LNMP
############################################
############################################
請選擇你要安裝的服務(1 | 2 | 3 | 4)
EOF
echo “請輸入一個數字: “
read num
case $num in
1)
echo “Nginx installing……….. have a rest”
init_server
download_src
inst_nginx
;;
2)
echo “PHP installing……. have a rest”
download_src
init_server
inst_mysql
inst_libmcypt
inst_php
inst_php_ex
;;
3)
echo “MySQL installing…… have a rest”
init_server
download_src
inst_mysql
;;
4)
echo “LNMP installing…… have a rest”
download_src
init_server
inst_mysql
inst_libmcypt
inst_php
inst_php_ex
inst_nginx
;;
*)
echo “輸入錯誤
“ echo “選擇你要安裝的服務(1 | 2 | 3 | 4)”
;;
esac
#檢查安裝是否成功
case $num in
4)
if [ -s /usr/local/nginx ] && [ -s /usr/local/php ] && [ -s /usr/local/mysql ]
then
echo “LNMP is install completed”
echo “Nginx basedir: /usr/local/nginx”
echo “PHP basedir: /usr/local/php”
echo “MySQL basedir: /usr/local/mysql”
echo “MySQL datadir: /usr/local/mysql/data”
else
echo “LNMP is install fail”
fi
;;
3)
if [ -s /usr/local/mysql ]
then
echo “Nginx is install completed”
echo “MySQL basedir: /usr/local/mysql”
echo “MySQL datadir: /usr/local/mysql/data”
phpd
nginxd
else
echo “Nginx is install fail”
fi
;;
2)
if [ -s /usr/local/php ]
then
echo “PHP is install completed”
echo “PHP basedir: /usr/local/php”
phpd
else
echo “PHP is install fail”
fi
;;
1)
if [ -s /usr/local/nginx ]
then
echo “Nginx is install completed”
echo “Nginx basedir: /usr/local/nginx “
nginxd
else
echo “Nginx is install fail”
fi
;;
esac

本文轉自1594cqb 51CTO部落格，原文連結：http://blog.51cto.com/wolfchen/1109870，如需轉載請自行聯絡原作者

LNMP一鍵自動安裝指令碼薦
2013-01-06
LNMP指令碼
shell指令碼：一鍵安裝LAMP、LNMP指令碼
2016-04-04
指令碼LAMPLNMP
golang一鍵自動安裝指令碼
2019-06-11
Golang指令碼
lnmp安裝指令碼
2017-11-22
LNMP指令碼
[SHELL]LNMP一鍵安裝指令碼設計(v1.0)
2017-11-07
LNMP指令碼
LNMP自動部署指令碼
2017-11-14
LNMP指令碼
LNMP安裝shell指令碼
2017-11-08
LNMP指令碼
LNMP一鍵安裝包
2017-11-12
LNMP
LAMPorLNMP一鍵安裝指令碼
2017-11-08
LAMPLNMP指令碼
shell指令碼一鍵安裝nginx
2018-12-05
指令碼Nginx
mydumper自動化安裝指令碼
2018-06-21
指令碼
zabbix一鍵安裝lnmp環境
2017-11-12
LNMP
lnmp一鍵安裝包下載地址
2015-07-20
LNMP
自動化指令碼安裝mysql shell指令碼範例
2019-11-06
指令碼MySql
OneinStack一鍵PHP/JAVA/HHVM安裝及VPS手動安裝LNMP
2015-12-03
PHPJavaLNMP
mysql8.0原始碼一鍵安裝指令碼
2022-09-21
MySql原始碼指令碼
Shell指令碼 | 一鍵解除安裝安卓App
2019-02-22
指令碼安卓APP
centos7 mysql 一鍵安裝指令碼
2020-11-26
CentOSMySql指令碼
CentOS下LAMP一鍵yum安裝指令碼
2017-05-05
CentOSLAMP指令碼
cacti一鍵安裝指令碼V1.1
2017-11-14
指令碼
自動化安裝zabbix指令碼（3.0/3.2）
2017-02-11
指令碼
Hadoop自動化安裝shell指令碼
2015-04-12
Hadoop指令碼
lnmp 一鍵安裝包部署ThinkPHP5
2019-03-03
LNMPPHP
使用shell指令碼實現LANMP一鍵安裝
2016-12-18
指令碼
MySQL5.6一鍵編譯安裝指令碼
2016-01-08
MySql編譯指令碼
easy-hiphop一鍵安裝hiphop指令碼薦
2012-08-17
指令碼
shell指令碼一鍵安裝nginx-1.18.0
2024-04-23
指令碼Nginx
rsync客戶端一鍵安裝rsync指令碼(原始碼)
2020-05-10
客戶端指令碼原始碼
lnmp指令碼
2013-07-14
LNMP指令碼
oneinstack 另一個 lnmp環境一鍵安裝工具
2016-02-21
LNMP
分析安裝包lnmp中的apache.sh指令碼薦
2013-09-26
LNMPApache指令碼
Jumpserver v0.2.0 一鍵安裝指令碼薦
2015-04-28
Server指令碼
MySQL資料庫叢集自動安裝指令碼!
2004-11-12
MySql資料庫指令碼
利用Vultr VPS皮膚自帶指令碼一鍵安裝WordPress網站程式
2015-10-21
指令碼網站
k3s單機版安裝部署附一鍵安裝指令碼
2021-11-10
指令碼
shell之lnmp(nginx-1.0.5+php-fpm5.3.6+mysql)安裝指令碼
2017-11-15
LNMPNginxPHPMySql指令碼
LNMP 原始碼安裝搭建薦
2010-11-16
LNMP原始碼
DSS+Linkis Ansible 單機一鍵安裝指令碼
2022-12-28
指令碼

LNMP一鍵自動安裝指令碼

相關文章